2012 FORD F150 battery

[x] Cancel search: battery

Page 152 of 462

FORD F150 2012 12.G Owners Manual 4. Insert the new battery. Refer to the instructions inside the IKT for the
correct orientation of the battery. Press the battery down to ensure that
the battery is fully seated in the battery housing

Page 273 of 462

FORD F150 2012 12.G Owners Manual WIRING FAULT ON TRAILER:This message is displayed when a
Short circuit on the electric brake output wirehas occurred. If the
WIRING FAULT ON TRAILERmessage is displayed and accompanied
by a single chi

Page 277 of 462

FORD F150 2012 12.G Owners Manual WARNING:Do not disconnect the battery during recreational
towing. Doing so will prevent the transfer case from shifting
properly and may cause the vehicle to roll even if the transmission is in
P (Par

Page 278 of 462

FORD F150 2012 12.G Owners Manual STARTING
Positions of the ignition
1. Off — locks the automatic
transmission gearshift lever and
allows key removal.Note:In order to
switch off the engine while the
vehicle is in motion, shift to ne

Page 299 of 462

FORD F150 2012 12.G Owners Manual AUTOMATIC TRANSMISSION OPERATION
Understanding the shift positions of the 6-speed automatic
transmission
This vehicle is equipped with an adaptive transmission shift strategy. The
adaptive transmissio

Page 326 of 462

FORD F150 2012 12.G Owners Manual ROADSIDE ASSISTANCE
Vehicles sold in the U.S. : Getting roadside assistance
To fully assist you should you have a vehicle concern, Ford Motor
Company offers a complimentary roadside assistance program

Page 327 of 462

FORD F150 2012 12.G Owners Manual Vehicles sold in the U.S. : Using roadside assistance
Complete the roadside assistance identification card and place it in your
wallet for quick reference. This card is found in the Owner’s Guide
po

Page 332 of 462

FORD F150 2012 12.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingProtected Circuits
36 10A Restraint control module,
Occupant classification system
module
37 10A Trailer brake control
38 10A Delayed accessory – 110V power
point,