2012 FORD EXPLORER clock

When the battery is disconnected or a new battery installed, the
transmission must relearn its adaptive strategy. As a result of this, the
transmission may shift firmly. This operation is considered normal and
will not affect function or durability of the transmission. Over time the
adaptive learning process will fully update transmission operation to its
optimum shift feel.
If the battery has been disconnected or a new battery has been installed,
the clock and the preset radio stations must be reset once the battery is
reconnected.
•Always dispose of automotive
batteries in a responsible manner.
Follow your local authorized
standards for disposal. Call your
local authorized recycling center
to find out more about recycling
automotive batteries.
Battery management system
The battery management system (BMS) monitors battery conditions and
takes actions to extend battery life. If excessive battery drain is
detected, the system may temporarily disable certain electrical features
to protect the battery. Those electrical accessories affected include rear
defrost, heated /cooled seats, climate control fan, heated steering wheel,
audio and navigation system. A message may be displayed on the
instrument cluster or center stack display to alert the driver that battery
protection actions are active. See theMessage centerin theInstrument
ClusterandEntertainment systemschapters for more information.
These messages are only for notification that an action is taking place,
and do not necessarily indicate that an electrical problem exists or that
the battery requires replacement.
Electrical accessory installation
To ensure proper operation of the BMS, any electrical devices that are
added to the vehicle should not have their ground connection made
directly at the negative battery post. A connection at the negative
battery post can cause inaccurate measurements of the battery condition
and potential incorrect system operation.
L
E
A
D
RETURN
RECYCLE
Maintenance and Specifications
375
2012 Explorer(exp)
Owners Guide, 1st Printing
USA(fus)

may harm engine and cooling system components and may void the
warranty. Refer toMaintenance product specifications and
capacitiesin this chapter.
Note:Do not use stop leak pellets or cooling system sealants/additives
as they can cause damage to the engine cooling and/or heating systems.
This damage would not be covered under your vehicle’s warranty.
•A large amount of water without engine coolant may be added, in case
of emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained, chemically cleaned with Motorcraft
Premium Cooling System Flush, and refilled with a 50/50 mixture of
engine coolant and distilled water as soon as possible. Water alone
(without engine coolant) can cause engine damage from corrosion,
overheating or freezing.
•Do not use alcohol, methanol, brine or any engine coolants
mixed with alcohol or methanol antifreeze (coolant).Alcohol
and other liquids can cause engine damage from overheating or
freezing.
•Do not add extra inhibitors or additives to the coolant.These
can be harmful and compromise the corrosion protection of the engine
coolant.
For vehicles with overflow coolant systems with a non-pressurized cap
on the coolant recovery system, add coolant to the coolant recovery
reservoir when the engine is cool. Add the proper mixture of coolant and
distilled water to the FULL COLD level. For all other vehicles which have
a coolant degas system with a pressurized cap, or if it is necessary to
remove the coolant pressure relief cap on the radiator of a vehicle with
an overflow system, follow these steps to add engine coolant.
WARNING:To reduce the risk of personal injury, make sure the
engine is cool before unscrewing the coolant pressure relief cap.
The cooling system is under pressure; steam and hot liquid can come
out forcefully when the cap is loosened slightly.
Add the proper mixture of coolant and water to the cooling system by
following these steps:
1. Before you begin, turn the engine off and let it cool.
2. When the engine is cool, wrap a thick cloth around the coolant
pressure relief cap on the coolant reservoir (a translucent plastic bottle).
Slowly turn cap counterclockwise (left) until pressure begins to release.
3. Step back while the pressure releases.
Maintenance and Specifications
378
2012 Explorer(exp)
Owners Guide, 1st Printing
USA(fus)

4. When you are sure that all the pressure has been released, use the
cloth to turn it counterclockwise and remove the cap.
5. Fill the coolant reservoir slowly with the proper coolant mixture, to
within the COLD FILL RANGE or the FULL COLD level on the reservoir.
If you removed the radiator cap in an overflow system, fill the radiator
until the coolant is visible and radiator is almost full.
6. Replace the cap. Turn until tightly installed. Cap must be tightly
installed to prevent coolant loss.
After any coolant has been added, check the coolant concentration (refer
toChecking engine coolant). If the concentration is not 50/50, drain
some coolant and adjust the concentration. It may take several drains
and additions to obtain a 50/50 coolant concentration.
Whenever coolant has been added, the coolant level in the coolant
reservoir should be checked the next few times you drive the vehicle. If
necessary, add enough 50/50 concentration of engine coolant and
distilled water to bring the liquid level to the proper level.
If you have to add more than 1.0 quart (1.0 liter) of engine coolant per
month, have your authorized dealer check the engine cooling system.
Your cooling system may have a leak. Operating an engine with a low
level of coolant can result in engine overheating and possible engine
damage.
Recycled engine coolant
Ford Motor Company does NOT recommend the use of recycled engine
coolant since a Ford-approved recycling process is not yet available.
Used engine coolant should be disposed of in an appropriate
manner. Follow your community’s regulations and standards for recycling
and disposing of automotive fluids.
Coolant refill capacity
To find out how much fluid your vehicle’s cooling system can hold, refer
toMaintenance product specifications and capacitiesin this chapter.
Fill your engine coolant reservoir as outlined previously in theAdding
engine coolantsection.
Severe climates
If you drive in extremely cold climates:
•It may be necessary to increase the coolant concentration
above 50%.
Maintenance and Specifications
379
2012 Explorer(exp)
Owners Guide, 1st Printing
USA(fus)

Changing a tire .........................334
Child safety seats ......................212
in front seat ............................212
in rear seat ..............................212
LATCH .....................................218
recommendations ...................210
tether anchorage hardware ...220
Child safety seats - booster
seats ...........................................224
Cleaning your vehicle
engine compartment ..............358
instrument panel ....................360
interior .....................................361
plastic parts ............................359
washing ....................................356
waxing .....................................357
wheels ......................................357
wiper blades ............................359
Climate control
(see Air conditioning or
Heating) ...........................60, 63, 65
Clock ............................................49
Collision Warning System .........297
Console ........................................90
overhead ....................................89
rear ............................................90
Controls
power seat ...............................157
steering column ......................108
Coolant
checking and adding ..............376
refill capacities ................379, 402
specifications ..........................402
Cross Traffic Alert ....................307
Cruise control
(see Speed control) ....................98
Customer Assistance ................322Ford Extended Service
Plan ..................................410, 413
Getting assistance outside the
U.S. and Canada .....................352
Getting roadside assistance ...322
Getting the service you
need .........................................348
Ordering additional owner’s
literature .................................354
Utilizing the
Mediation/Arbitration
Program ...................................352
D
Daytime running lamps
(see Lamps) ................................73
Defrost
rear window ..............................68
Dipstick
automatic transmission
fluid ..................................395, 397
engine oil .................................370
Driving under special
conditions ..................291, 314, 317
sand .........................................316
snow and ice ...........................318
through water .................316, 321
E
Electronic message center ...22, 26
Emergencies, roadside
jump-starting ..........................343
running out of fuel .........342, 388
Emission control system ..........392
Engine ........................................405
cleaning ...................................358
coolant .....................................376
fail-safe cooling .......................381
Index
434
2012 Explorer(exp)
Owners Guide, 1st Printing
USA(fus)

Scheduled Maintenance Guide
Normal Scheduled
Maintenance and Log .............420
Seats ..........................................154
child safety seats ....................212
climate control ........................161
easy access/easyout feature ..164
front seats .......................156, 160
heated ......................................159
memory seat ...................139, 163
second row seats ............166, 169
third row seats ........169, 171–172
Second-row power fold seat ....168
SecuriCode keyless entry
system ........................................146
SecuriLock passive anti-theft
system ........................................148
Setting the clock .........................49
Snowplowing .................................6
SOS Post Crash Alert ...............207
Spare tire
(see Changing the Tire) ...........337
Spark plugs,
specifications .....................401, 405
Special notice
ambulance conversions ..............6
utility-type vehicles ....................6
Specification chart,
lubricants ...................................402
Speed control ..............................98
Starting your
vehicle ........................264–265, 267
jump starting ..........................343
push button start system .......267Steering wheel
controls ....................................108
tilting .........................................88
SYNC..........................................59
T
Third-row power fold seat .......174
Tilt steering wheel ......................88
Tire Pressure Monitoring
System (TPMS)
Tires, Wheels and Loading ....246
Tires ...........................231–233, 334
alignment ................................240
care ..........................................236
changing ..................334, 337–338
checking the pressure ............236
inflating ...................................234
label .........................................245
replacing ..................................237
rotating ....................................240
safety practices .......................239
sidewall information ...............241
snow tires and chains ............250
spare tire .................................334
terminology .............................233
tire grades ...............................232
treadwear ........................232, 236
Towing .......................................258
recreational towing .................262
trailer towing ..........................258
wrecker ....................................346
Transmission .............................285
brake-shift interlock (BSI) ....284
fluid, checking and adding
(automatic) .....................395, 397
fluid, refill capacities ..............402
lubricant specifications ..........402
Turn signal ..................................76
Index
438
2012 Explorer(exp)
Owners Guide, 1st Printing
USA(fus)