2012 FIAT PUNTO clutch

167
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICATIONS
INDEX
CONTROLS
AND DEVICES
SERVICE
AND CARE
●● ●● ● ●
●● ●● ● ●
●● ●● ● ●
●● ●● ● ●
●● ●● ● ●
●● ●
●● ●● ● ●
●● ●● ● ●
●● ●● ● ●
●● ●● ● ● ●●
●●
●● ●● ●
●● ●● ● ●
SCHEDULED SERVICING PLAN
EURO 4 PETROL, EURO 5 PETROL AND EURO 4 DIESEL VERSIONS
Thousands of kilometres 30 60 90 120 150 180
Check tyre condition/wear and adjust pressure if required
Check operation of lighting system (headlamps, direction indicators,
hazard warning lights, boot, passenger compartment, glove box,
instrument panel warning lights, etc.)
Check operation of windscreen washer system and adjust nozzles
if necessary.
Check windscreen/rear window wiper blade position/wear
Check conditions and wear of front/rear disc brake pads
(for versions/markets where provided) and operation of pad wear indica\
tor
Check condition and wear of rear drum brake linings
Visually inspect the conditions of: bodywork,
underbody protection, pipes and tubes
(exhaust – fuel – brakes), rubber parts (boots, sleeves, bushes, etc.)
Check cleanliness of bonnet and boot locks, and the cleanliness
and lubrication of linkages
Check and, if necessary, top up fluid levels (brakes/hydraulic
clutch, windscreen washer, battery, engine coolant, etc.)
Check the handbrake lever stroke and adjust it, if necessary
Visually inspect the condition of accessory drive belt/s.
Visually inspect the condition of toothed timing belt
Check tension of accessory drive belt/s, and adjust if necessary
(versions 1.2 – 1.4 heated)
Check and, if necessary, adjust tappet clearance (1.2 8v – 1.4 8vversions)
Check exhaust gas emissions
165-184 PUNTO POP 1ed EN 30-09-2011 10:21 Pagina 167

169
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICATIONS
INDEX
CONTROLS
AND DEVICES
SERVICE
AND CARE
●● ● ● ●
●● ● ● ●
●● ● ● ●
●● ● ● ●
●● ● ● ●
●● ● ● ●
●●
●● ● ● ●
●● ● ● ●
●● ● ● ●
●● ● ● ● ●●
●● ● ● ●
●● ● ● ● ●
EURO 5 DIESEL VERSIONS
Thousands of kilometres 35 70 105 140 175
Check tyre condition/wear and adjust pressure if required
Check operation of lighting system (headlamps, direction indicators, ha\
zard warning lights,
boot, passenger compartment, glove box, instrument panel warning lights\
, etc.)
Check operation of windscreen washer system and adjust nozzles
if necessary
Check windscreen/rear window wiper blade position/wear
Check condition and wear of front disc brake pads and operation of pad
wear indicator
Check condition and wear of rear disc brake pads (for versions/markets,\
where provided)
Check condition and wear of rear drum brake linings (1.3 Multijet versi\
on)
Visually inspect the conditions of: bodywork, underbody protection,
pipes and tubes (exhaust - fuel - brakes), rubber parts (boots, sleev\
es, bushes, etc.)
Check cleanliness of bonnet and boot locks, as well as cleanliness and l\
ubrication of linkages
Check and, if necessary, top up fluid levels (brakes/hydraulic clutch, \
windscreen washer,
battery, engine coolant, etc.)
Check the handbrake lever stroke and adjust it, if necessary
Visually inspect the condition of accessory drive belts
Check emissions/fumes
Check engine management system operation (via diagnostic socket)
Replace accessory drive belt/s
165-184 PUNTO POP 1ed EN 30-09-2011 10:21 Pagina 169

190
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE
AND CARE
INDEX
CONTROLS
AND DEVICES
TECHNICAL
SPECIFICATIONS
FUEL SUPPLY
1.2 - 1.4 1.3 Multijet
Fuel supply Multipoint electronic injection “Common Rail” Multijet direct injection
Modifications or repairs to the fuel supply system that are not carried \
out properly or do not take the system’s
technical specifications into account can cause malfunctions leading to \
the risk of fire.
WARNING
TRANSMISSION
1.2 - 1.4 - 1.3 Multijet
Gearbox Five forward gears plus reverse with synchronisersfor selecting forward gears
Clutch Self-adjusting with no free travel
Drive Front
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 190

201
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE
AND CARE
INDEX
CONTROLS
AND DEVICES
TECHNICAL
SPECIFICATIONS
Brake liquid
Fuel additive
Use Quality specifications of fluids and lubricants OriginalApplicationsfor correct car operation fluids and lubricants
(*) IMPORTANT Do not use fluids with different specifications for topping up\
or mixing.
(❒ ) When the vehicle is used in particularly harsh climate conditions, we re\
commend using a 60-40 mixture of PARAFLU
UPand distalled water.
Windscreen/rear
window washer
fluid Mechanical gearbox and
differential (petrol and
1.3 Multijet 75HP versions)
Mechanical gearbox and
differential (1.3 Multijet
85HP versions)
Wheel side
constant-velocity joints
Differential side
constant-velocity joints
Hydraulic brakes
and hydraulic clutch con-
trols
Cooling circuit.
Mixture: 50% water and
50%
PARAFLU
UP(❒ )
Mix 25cc per 10 litres of
diesel
To be used diluted or
undiluted in windscreen/
rear window washer/
wiper systems
TUTELA CAR TECHNYX
Contractual Technical
Reference N° F010.B05
TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference N° F702.G07
TUTELA ALL STAR
Contractual Technical
Reference N° F702.G07
TUTELA STAR 700
Contractual Technical
Reference N° F701.C07
TUTELA TOP 4
Contractual Technical
Reference N° F001.A93
PARAFLU
UP(*)
Contractual Technical
Reference N° F101.M01
TUTELA DIESEL ART
Contractual Technical
Reference N° F601.L06
TUTELA
PROFESSIONAL SC35
Contractual Technical
Reference N° F201.D02
Lubricants
and greases
for drive
transmission
system
Radiator
protection
SAE 75W-85 grade synthetic base lubricant.
FIAT 9.55550-MX3 certification
SAE 75W grade synthetic base lubricant.
FIAT 9.55550-MZ6 certification
Molybdenum disulphide grease, for use at
high temperatures.
FIAT 9.55580 certification
. NL.GI. 1-2 consistency
Grease for constant-velocity joints with low
friction coefficient.
FIAT 9.55580 certification . NL.GI. 0-2 consistency
Synthetic fluid FMVSS n° 116 DOT 4, ISO 4925
SAE J1704, CUNA NC 956- 01.
FIAT 9.55597 certification
Inhibited mono ethylene glycol-based antifreeze
protection, red, with organic formulation.
Passes CUNA NC 956-16, ASTM D 3306 specifications.
FIAT 9.55523 certification
Additive for diesel antifreeze, protecting
diesel engines
Mixture of alcohol, water and surfactants
CUNA NC 956-II
FIAT 9.55522 certification .
185-208 PUNTO POP 1ed EN 3-10-2011 11:50 Pagina 201

209
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
CONTROLS
AND DEVICESCar maintenance and care ......... 165
– Heavy use of the vehicle ........ 171
– Planned maintenance programme ....................... 167-149
– Regular checks .......................... 171
– Scheduled servicing ................ 166
Car prolon ged stop ...................... 120
Card/CD hol der ........................... 58
Carrying children safely ............... 97
Ceiling lig hts .................................... 51
Changing a tyre ............................. 135
Chassis mark ing ............................ 186
Checking fluid levels ...................... 172
Child lo ck ....................................... 62
Child safety lock ........................... 62
Child seats (compliance for use) .......... 100-102
– Universal Isofix seat ............... 101
Cigarette ligh ter ............................ 58
Clutch .............................................. 190
CO
2emissions .............................. 203 Code card
...................................... 8
Consumption – engine oil .................................. 174
– fuel .............................................. 202
Control bu ttons ............................ 53
Cup holder co mpartments ......... 58
Cup/can holders ............................ 58
Dashboard ..................................... 5
Dashboard and controls ............. 4
Data plates – bodywork paint ....................... 187
– identification data ................... 186
Dead lock ( device) ....................... 61
Digital di splay ................................. 16
Dimensions .................................... 196
Direction indicators – controls .................................... 48
– front bulb repla cement .......... 148
– rear bulb repla cement ........... 149
– side bulb replacement ............ 149
Display functio ns ........................... 24
Door lo cks ..................................... 60
Doors .............................................. 60
ABS ................................................. 72
Accessories purchased by the o wner ............................... 86
Adjusting the seats ....................... 32
Air filter .......................................... 177
Alarm .............................................. 10
Arm rest .......................................... 57
Ashtray ............................................. 59
ASR system .................................... 75
Battery
– battery recha rging .................. 161
– inspecting th e charge ............. 177
– jump starting ............................ 134
– replacement ............................. 177
Body – maintenance ............................. 182
– version codes .......................... 188
Brake fluid le vel ............................. 176
Brakes – fluid le vel ................................... 176
– specifications ............................ 191
Bulb (replacement) – bulb types ................................. 146
– general info rmation ................ 145
I
I
N
N
D
D
E
E
X
X
209-214 PUNTO POP 1ed EN 3-10-2011 11:53 Pagina 209