2012 DODGE JOURNEY key fob

[x] Cancel search: key fob

Page 21 of 603

DODGE JOURNEY 2012 1.G Owners Manual 3. If any doors are open, close them.
To Disarm The System
The Vehicle Security Alarm can be disarmed using any of
the following methods:
•Press the UNLOCK button on the Remote Keyless
Entry (RKE) t

Page 23 of 603

DODGE JOURNEY 2012 1.G Owners Manual REMOTE KEYLESS ENTRY (RKE)
The RKE system allows you to lock or unlock the doors,
open the trunk, or activate the Panic Alarm from dis-
tances up to approximately 66 ft (20 m) using a hand-held
Key Fo

Page 25 of 603

DODGE JOURNEY 2012 1.G Owners Manual Sound Horn With Remote Key Lock
This feature will cause the horn to chirp when the doors
are locked with the RKE transmitter. This feature can be
turned on or turned off. To change the current setting

Page 27 of 603

DODGE JOURNEY 2012 1.G Owners Manual battery with your fingers. Skin oils may cause battery
deterioration. If you touch a battery, clean it with rubbing
alcohol.
4. To assemble the RKE transmitter case, snap the two
halves together.
Gene

Page 31 of 603

DODGE JOURNEY 2012 1.G Owners Manual DOOR LOCKS
Manual Door Locks
To lock each door, push the door lock knob on each door
trim panel downward. To unlock the front doors, pull the
inside door handle to the first detent. To unlock the rear

Page 32 of 603

DODGE JOURNEY 2012 1.G Owners Manual WARNING! (Continued)
•Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing children
in a vehicle unattended is dangerous for a number
of reasons. A child or other

Page 33 of 603

DODGE JOURNEY 2012 1.G Owners Manual If you press the power door lock switch while the
ignition is in the ACC or ON/RUN position, and any
front door is open, the power locks will not operate. This
prevents you from accidentally locking t

Page 41 of 603

DODGE JOURNEY 2012 1.G Owners Manual There are single window controls on each passenger door
trim panel, which operate the passenger door windows.
The window controls will operate when the ignition is in
the ON/RUN or ACC position.
NOTE:
Page:   < prev 1-8 9-16 17-24 next >