2012 DODGE CHARGER stop start

[x] Cancel search: stop start

Page 373 of 594

DODGE CHARGER 2012 7.G Owners Manual Standard Shifter
The standard shift lever has PARK, REVERSE, NEU-
TRAL, DRIVE, and LOW shift positions. Using the LOW
position manually downshifts the transmission to a
lower gear based on vehicle spe

Page 374 of 594

DODGE CHARGER 2012 7.G Owners Manual •To shift back into REVERSE from NEUTRAL, firmly
press the brake pedal, press the lock button on the shift
lever, then push the shift lever forward to the first
detent and release. “R” will disp

Page 375 of 594

DODGE CHARGER 2012 7.G Owners Manual Transmission Limp Home Mode
Transmission function is monitored electronically for
abnormal conditions. If a condition is detected that could
result in transmission damage, Transmission Limp Home
Mode

Page 376 of 594

DODGE CHARGER 2012 7.G Owners Manual If the transmission cannot be reset, authorized dealer
service is required.
Optional Shifter With AutoStick
The optional shift lever (with AutoStick shift paddles
mounted on the steering wheel) prov

Page 380 of 594

DODGE CHARGER 2012 7.G Owners Manual CAUTION!
•Before moving the shift lever out of PARK, you
must turn the ignition switch from the LOCK/OFF
position to the ON/RUN position, and also press
the brake pedal. Otherwise, damage to the shi

Page 382 of 594

DODGE CHARGER 2012 7.G Owners Manual Transmission Limp Home Mode
Transmission function is monitored electronically for
abnormal conditions. If a condition is detected that could
result in transmission damage, Transmission Limp Home
Mode

Page 384 of 594

DODGE CHARGER 2012 7.G Owners Manual to revert to automatic operation. The transmission will
also upshift automatically once redline is reached. If
the pedal is pressed to the floor, the transmission will
downshift when possible (based o

Page 385 of 594

DODGE CHARGER 2012 7.G Owners Manual AutoStickis active, the current transmission gear is
displayed in the instrument cluster. In AutoStick mode,
the transmission will shift up or down when (+/-) is
manually selected by the driver (usi