2012 Citroen C4 display

302


1
2
1
4
2
3
05 USING THE TELEPHONE


Repeat the previous step 1
to display
the " TELEPHONE
" menu.

Select " Directory
" and confi rm.
An incoming call is announced by a ring and a superimposed display
in the multifunction screen.
Mobile
(depending on the information
available in the contact records of
the telephone connected).
" YES
" to accept the call is selected by
default.
Press OK
to accept the call.
Select " NO
" and confi rm to reject the
call.
or
Press SOURCE
to accept the call.


MAKING A CALL -
FROM THE DIRECTORY

Select a contact then confi rm.


RECEIVING A CALL


Select the number and confi rm.

A long press on ESC
or on
SOURCE
also rejects an incoming call.
Business
Home

303

1
2a2c
2b
05 USING THE TELEPHONE


During a call, press OK
to display the
contextual menu.

Hang up

In the contextual menu:


- select " Telephone mode
" to
transfer the call to the telephone.

- deselect " Telephone mode
" to
transfer the call to the vehicle.

In the contextual menu:


- select " Micro OFF
" to switch off the
microphone.

- deselect " Micro OFF
" to switch the
microphone on.


In certain cases, the combined mode has to activated from the
telephone.
If the contact has been cut off, when you reconnect on returning to
the vehicle, the Bluetooth connection will be restored automatically
(depending on the compatibility of the telephone).


MANAGING CALLS


A long press on SOURCE
or TEL
also
ends the call. In the contextual menu, select " Hang
up
" to end the call.
Secret - Mute
(so that the caller cannot hear)

Combined mode
(to leave the vehicle without ending the call)

306


1
06
2
3

Press ‘
to display the audio settings
menu.

Press 
or 
to modify the selected
setting.

AUDIO SETTINGS


SCREEN A


Press 
or 
for the previous or next
setting in the list.

The Ambience, Treble and Bass audio settings are separate and
independent for each sound source.

307
1
2
06
3

Press ‘
to display the audio settings
menu.

The settings available are:


- Ambience,

- Bass,

- Treble,

- Loudness,

- Distribution: Personalised or Driver * ,

- Left/right balance,

- Fader (front/rear balance),

- Auto. volume.



SCREEN C


The distribution, or spatialisation of sound, is an audio process
which allows the sound quality to be improved according to the
setting chosen, corresponding to the position of the listeners in the
vehicle.

AUDIO SETTINGS


*
According to equipment.
Select and confi rm " Other settings…
"
to display the next setting in the list.
The Ambience, Treble and Bass audio settings are different and
independent for each sound source.

308
5
63
4
07
2
1
CONFIGURATION













SETTING THE DATE AND TIME


Select the setting to be modifi ed.
Confi rm by pressing OK
, then make
the change and confi rm again to
save the modifi cation.

Using the arrows, select " Display
confi guration
" and confi rm. Press MENU
.



Using the arrows, select
" Personalisation-confi guration
"
and confi rm.
SCREEN C

Using the arrows, select " Date and
time adjustment
" and confi rm.

Adjust the settings one by one,
confi rming by pressing the OK

button. Next select the " OK
" tab on
the screen then confi rm to exit from
the " Date and time adjustment
"
menu.

309


08 TRIP COMPUTER


Each press of the button, located at the end of the
wiper stalk, displays the different trip computer
information in succession, depending on the screen.


- the "vehicle " tab with:


●
the range, the current fuel consumption and
the distance remaining to the destination or the
Stop & Start time counter,

- the "1" tab (trip 1) with:


●
the average speed, the average consumption
and the distance travelled calculated over trip " 1
",

- the "2" tab (trip 2) with the same information for a
second trip.

Zero reset
When the required trip is displayed, press the control
for more than two seconds.

Range:
displays the distance which can travelled with the remaining fuel
detected in the tank, basd on the average consumption over the last few
miles (kilometres).
This displayed value may vary signifi cantly following a change in the
vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 10 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of the digits,
contact a CITROËN dealer.
A FEW DEFINITIONS


Current fuel consumption:
only calculated and displayed above 20 mph (30 km/h).


Average fuel consumption:
this is the average fuel consumption since
the last trip computer zero reset.

Distance travelled:
calculated since the last trip computer zero reset.

Distance remaining to the destination:
calculated with reference to
the fi nal destination, entered by the user. If guidance is activated, the
navigation system calculates it as a current value.

Average speed:
this is the average speed calculated since the last trip
computer zero reset (ignition on).







Stop & Start time counter
(minutes/seconds or hours/minutes)
If your vehicle is fi tted with Stop & Start, a time counter calculates the
time spent in STOP mode during a journey.
It resets to zero every time the ignition is switched on with the key.

312
09 SCREEN MENU MAP






Personalisation-configuration


Defi ne the vehicle parameters

Access to the vehicle

Plip action
Driving position setting
Unlocking boot only

Driving assistance

Parking brake automatic
Rear wipe in reverse gear
Speeds memorised

Vehicle lighting

Directional headlamps
Daytime lights

Interior lighting

Follow-me-home headlamps
Welcome lighting

Choice of language
Display confi guration

Choice of units


Date and time adjustment


Display parameters


Brightness




Choice of sounds

1
2
3
3
3
2
3
3
3
2
3
3
2
3
3
1
1
2
2
2
2
1

314
FREQUENTLY ASKED QUESTIONS



QUESTION



ANSWER



SOLUTION


The quality of reception
of the radio station
listened to gradually
deteriorates or the stored
stations do not function
(no sound, 87.5 MHz is
displayed...). The vehicle is too far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.


The environment (hills, buildings, tunnels, basement car parks...) block
reception, including in RDS mode. This phenomenon is normal and does not indicate
a failure of the audio equipment.
The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park). Have the aerial checked by a CITROËN dealer.
Sound cut-outs of 1 to
2 seconds in radio mode. During this brief sound cut-out, the RDS searches for any frequency
permitting better reception of the station. Deactivate the RDS function if the phenomenon is
too frequent and always on the same route.
The traffi c announcement
(TA) is displayed. I do
not receive any traffi c
information. The radio station does not broadcast traffi c information. Tune to a radio station which broadcasts traffi c
information.
The stored stations are
not found (no sound,
87.5 MHz is displayed...). An incorrect waveband is selected. Press the BAND AST button to return to the
waveband (AM, FM1, FM2, DAB * ) on which the
stations are stored.

*
Digital Audio Broadcasting.