2012 Citroen C3 trip computer

2
CONTENTS
Ventilation 50Heating 52Manual air conditioning 52Digital air conditioning 55Rear screen demist - defrost 57Scented air freshener 58Front seats 59Rear seats 61Mirrors 62Steering wheel adjustment 63
3 - COMFORT 50 Î 63
Remote control key 64
Window controls 68Doors 70Boot 73Fuel tank 74Misfuel prevention (Diesel) 76
4 - ACCESS 64 Î 76
Lighting controls 77Headlamp adjustment 80Wiper controls 81Courtesy lamps 84
Interior mood lighting 85Boot lamp 85
5 - VISIBILITY 77Î 85
Child seats 92ISOFIX child seats 97Child lock 100
7 - CHILD
SAFETY 92 Î 100 FAMILIARISATION 4
Î20
Monochrome screen A 43Monochrome screen C 4516/9 colour screen (MyWay) 48
2 - MULTIFUNCTION
SCREENS 43 Î49
Interior fi ttings 86Boot fi ttings 90
6 - FITTINGS86Î 91
Instrument panels 23Indicator and warning lamps 25Indicators 35Adjustment buttons 38Trip computer 40
1 - MONITORING 23Î42
ECO-DRIVING 21Î22

9
FAMILIARI
S
AT I
ON


1.
Steering lock and ignition.

2.
Audio equipment steering wheel
controls.

3.
Wipers/screenwash/trip computer
control stalk.

4.
Microphone.

5.
Scented air freshener.

6.
Central locking switch.

7.
Multifunction screen.

8.
Hazard warning lamps switch.

9.
Central adjustable air vents.

10.
Sunshine sensor
Hi-Fi audio system central speaker.

11 .
Passenger's airbag.

12.
Side adjustable air vent.

13.
Glove box/Passenger's airbag
deactivation/Audio/video sockets.

14.
Parking brake.

15.
Central armrest with storage.

16.
Upper and lower storage.

17.
MyWay or Audio system.

18.
Heating/air conditioning controls.

INSTRUMENTS AND CONTROLS

1
MONITORING
Panel grouping together the vehicle operation indication dials and warning lamps.
PETROL - DIESEL MANUAL GEARBOX INSTRUMENT PANELS


5.
Display management button


Servicing information.
Adjust the time and choose units.
Reset the service indicator.

6.
Instrument panel lighting button.


Adjusts the brightness of the lighting
of the instruments and controls.
For more information, refer to the
section on the button or function
and its associated display.


1.
Rev counter.

Indicates the speed of rotation of the
engine (x 1 000 rpm).

2.
Vehicle speed.


Indicates the current speed of the
moving vehicle (mph or km/h).

3.
Fuel level.


Indicates the quantity of fuel remaining
in the tank.

4.
Screen.


A.
Ambient temperature.


(°Celsius or °Fahrenheit)

B.
Gear
shift
indicator.


C.
Time.


D.
Engine oil level indicator.



Appears a few seconds after switching
on the ignition, then disappears.

E.
Trip computer.


F.
Service indicato

r.


(miles or km) then,
Total mileage.


These two functions are displayed
successively when switching on the
ignition.


Screen

1
40
MONITORING
Screen in the instrument panel

Monochrome screen
A


Zero reset
Information displays


)
Press the button, located at the end
of the wiper stalk
, to display the
various items of trip computer infor-
mation in succession.


)
Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the average
speed.

The trip computer provides the following
information:


- range,

- current fuel consumption,

- the Stop & Start time counter * ,
- distance travelled,

- average fuel consumption,

)
The next press then returns you to
the normal display.


TRIP COMPUTER


System that gives you current information
on your journey (range, fuel consump-
tion…).

- average speed.

*
Available only with the monochrome
screen A.

1
41
MONITORING





Monochrome screen C
16
/9 colour screen (MyWay)


Information displays


)
Press the button, located at the end
of the wiper stalk
, to display the
various trip computer tabs in suc-
cession:

- the current information
tab with:


●
the range,

●
the current fuel
consumption,

●
the distance
remaining to be
travelled or the Stop &
Start time counter,



- the trip "1"
tab with:


●
the distance travelled,

●
the average fuel
consumption,

●
the average speed,
for the fi rst trip.



- the trip "2"
tab with:


●
the distance travelled,

●
the average fuel
consumption,

●
the average speed,
for the second trip.



)
Pressing the button again returns
you to the normal display.


)
When the trip required is displayed,
press the button on the end of the wip-
er stalk for more than two seconds.
Trips "1"
and "2"
are independent but
their use is identical.
For example, trip "1"
can be used for
daily fi gures, and trip "2"
for monthly
fi gures.

Trip zero reset

1
42
MONITORING





A few definitions…


Range
(miles or km)
This indicates the distance
which can still be travelled
with the fuel remaining in the tank in
relation to the average fuel consump-
tion over the last few miles (kilometres)
travelled.
Current fuel consumption
(mpg or l/100 km or km/l)

This is the average fuel con-
sumption during the last few
seconds.

Average fuel consumption
(mpg or l/100 km or km/l)


This is the average fuel con-
sumption since the last trip
computer zero reset.

Average speed
(mph or km/h)

This is the average speed calcu-
lated since the last trip computer
zero reset (ignition on).
Distance travelled
(miles or km)

This indicates the distance
travelled since the last trip
computer zero reset.

This value may vary following a
change in the style of driving or
the relief, resulting in a signifi -
cant change in the current fuel
consumption.
If dashes are displayed continu-
ously while driving in place of the
digits, contact a CITROËN dealer
or a qualifi ed workshop. This function is only displayed
from 20 mph (30 km/h).
When the range falls below 20 miles
(30 km), dashes are displayed. After fi ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).

Distance remaining to
destination
(miles or km)
This is the distance remaining
to be travelled to the fi nal destination. It
can be entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.








Stop & Start time counter

(minutes/seconds or hours/minutes)
If your vehicle is fi tted with Stop &
Start, a time counter calculates the
time spent in STOP mode during a journey.
It resets to zero every time the ignition
is switched on with the key.

2
43
MULTIFUNCTION SCREENS
MONOCHROME SCREEN A

Displa
ys on the screen

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if
there is a risk of ice),

- status of the doors and boot,

- audio sources (radio, CD...),

- trip computer (refer to the "Instruments
and Controls" section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Boot open") may ap-
pear temporarily. These can be cleared
by pressing the "ESC"
button.
Controls

From the control panel of your Audio
system, you can:


)
press the "MENU"
button to gain
access to the main menu
,

)
press the " 
" or " 
" buttons to scroll
through the items on the screen,

)
press the "MODE"
button to change
the permanent application (date, audio
source...),

)
press the " 
" or " 
" buttons to
change a setting value,

)
press the "OK"
button to confi rm,
or

)
press the "ESC"
button to abandon
the operation in progress.



Main menu



)
Press the "MENU"
button to gain
access to the main menu
, then
press the " 
" or " 
" buttons to
scroll through the various menus:


- radio-CD,

- vehicle confi guration,

- options,

- display settings,

- languages,

- units.

)
Press the "OK"
button to select the
menu required.

Radio-CD
With the Audio system switched on,
once the "Radio-CD" menu has been
selected you can activate or deactivate
the functions linked with use of the ra-
dio (RDS, REG), or the CD (introscan,
shuffl e, CD repeat).
For more information on the "Radio-CD"
application, refer to the Audio system part
of the "Audio and Telematics" section.

2
45
MULTIFUNCTION SCREENS
MONOCHROME SCREEN C

Displa
ys on the screen

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if
there is a risk of ice),

- status of doors and boot,

- audio sources (radio, CD, USB port,
jack socket etc.),

- trip computer (refer to the "Instruments
and controls" section).
Warning messages (E.g. "Emissions
control system faulty") or information
messages (E.g.: Automatic headlamps
active") may appear temporarily. These
can be cleared by pressing the "ESC"

button.

From your Audio system control panel,
you can:


)
press the "MENU"
button to gain
access to the main menu
,

)
press the " 
" or " 
" buttons to scroll
through the items on the screen,

)
press the "MODE"
button to change
the permanent application (trip com-
puter, audio source...),

)
press the " 
" or " 
" buttons to
change a setting value,

)
press the "OK"
button to confi rm,
or


)
press the "ESC"
button to abandon
the operation in progress.



Main menu



)
Press the "MENU"
button to gain
access to the main menu
:


- audio functions,

- the trip computer,

- personalisation-confi guration,

- telephone (hands-free kit).

)
Press the " 
" or " 
" buttons to se-
lect the menu required, then confi rm
by pressing the "OK"
button.



"Audio functions" menu

With the Audio system switched on,
once this menu has been selected you
can activate or deactivate the functions
linked with use of the radio (RDS, REG,
RadioText), the CD (introscan, shuffl e,
CD repeat) or the MP3 player (USB
port/jack socket).
For more information on the "Audio
functions" application, refer to the
Audio system part of the "Audio and
Telematics" section.