66Practical information
1. Position the wheel.2.Screw in the bolts fully by hand.1.
Remove the trim. 2.
Slacken the wheel bolts using the
wheelbrace 1.
3. Place the jack 2in contact with one of
the four locations A provided on the
underbody, the one closest to the wheel to
be changed.
4.Extend the jack 2 until its base is in contact
with the ground. Ensure that the centrelineof the jack base is directly below thelocation A
used.
5.Lift the vehicle.
6. Remove the bolts and detach the wheel.3.Pre-tighten the bolts * using the wheelbrace 1.4.
Fold the jack 2
and detach it. *
If your vehicle is fitted with alloy wheels, when tightening the bolts it is normal to notice that the
washers do not come into contact with the spare wheel. It is still fixed securely.
Removing the wheel
Refi tting the wheel