Page 55 of 244
II!
COMFORT
53
REAR SEATS (ROW 2)
Seat back angle adjustment
Pull the control and adjust.
When the seat back is at the correct
angle, release the control.
Sit in the centre of the rear bench seat
to check that the two seats are at the
same level and that the angle of their
seat backs is the same.
Forwards-backwards adjustment
Pull the control towards the outside and
adjust.
When your seat is at the correct dis-
tance, release the control.
To ensure that the seat is secured cor-
rectly, move it forwards and backwards
slightly without using the control. When operating the seats, en-
sure that no person or object
is in the vicinity of the moving
parts to avoid any risk of injury or
damage.
To prevent the seat back from moving
forwards sharply and knocking you,
press on it with your back or push it with
your hand while operating the lever.
The rear seats can be folded in two parts
(1/3 - 2/3).
Page 56 of 244
II
COMFORT
54
Rear armrest
Lower the armrest to use it.
To return to the initial confi guration, push
the armrest until it locks in its vertical
position.
Access to the third row
The passenger gains access to the
third row of seats by tilting a second
row seat.
To put this seat back in place, refer to
the following pages.
Page 57 of 244
II
!
COMFORT
55
Folding the second row *
1.
Raise the rear seat lever A
, or
Pull the button in the boot B
for at least one second, or
Pull the rear seat releasing strap C
towards you.
2.
The seat backs fold forwards then the cushion rises and folds forwards.
3.
After carrying out these operations, press on the seat lightly to check that it is secured correctly. Before folding the seats, lower the head restraints fully.
Before folding the seat backs forwards, insert the seat belt buckles in the slots provided for this purpose in the rear seat
cushion.
Before
folding
the
seats
,
ensure that no object
or person is hindering
the execution of the operations.
Do not place luggage on the folded seats.
*
According to version.
Page 59 of 244
II
COMFORT
57
"Lowered seats" configuration
1.
Remove the head restraints from the front seats.
2.
Raise the rear armrest and remove the load space cover.
3.
Move the rear seats as far back as possible.
4.
Move the front seats as far forward as possible and tilt their seat backs fully.
5.
Tilt the seat back of the rear seats.
To return the seats to their normal position, carry out these operations in reverse order.
Page 83 of 244