2012 CHEVROLET VOLT bulb

[x] Cancel search: bulb

Page 1 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (1,1)Chevrolet Volt Owner Manual - 2012
2012 Chevrolet Volt Owner ManualM
In Brief. . . . . . . . . . . . . . . . . . . . . . . . 1-1
Instrument Panel . . . . . . . . . . . . . . 1-2
Initi

Page 167 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (51,1)Chevrolet Volt Owner Manual - 2012
Instruments and Controls 5-51
Key and Lock Messages
When programming new Remote
Keyless Entry (RKE) transmitters,
DIC messages display. SeeRemote
K

Page 190 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (4,1)Chevrolet Volt Owner Manual - 2012
6-4 Lighting
Turn and Lane-Change
Signals
An arrow on the instrument cluster
will flash in the direction of the turn
or lane change.
Move the lever

Page 305 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (1,1)Chevrolet Volt Owner Manual - 2012
Vehicle Care 10-1
Vehicle Care
General Information
General Information . . . . . . . . . . 10-2
California Proposition65 Warning . . . . . . . . . .

Page 333 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (29,1)Chevrolet Volt Owner Manual - 2012
Vehicle Care 10-29
Bulb Replacement
For the proper type of replacement
bulbs, seeReplacement Bulbs on
page 10‑32.
For any bulb‐changing procedu

Page 334 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (30,1)Chevrolet Volt Owner Manual - 2012
10-30 Vehicle Care
Passenger Side Headlamps
To replace the high/low‐beam
headlamp:
1. Open the hood. SeeHood on
page 10‑7.
2. Remove the air cl

Page 335 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (31,1)Chevrolet Volt Owner Manual - 2012
Vehicle Care 10-31
Back-Up Lamps
The back-up lamp is in the rear
fascia.
To replace a bulb:
1. Remove the three inboardscrews from the aero panel
l

Page 336 of 454

CHEVROLET VOLT 2012 1.G Owners Manual Black plate (32,1)Chevrolet Volt Owner Manual - 2012
10-32 Vehicle Care
A. Bulb Socket
B. Bulb
C. Lamp Assembly
3. Turn the bulb socket (A) counterclockwise to remove it
from the lamp assembly (C).
4.
Page:   1-8 9-16 next >