2012 CHEVROLET SONIC bulb

[x] Cancel search: bulb

Page 2 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (2,1)Chevrolet Sonic Owner Manual - 2012
2012 Chevrolet Sonic Owner ManualM
Driving and Operating. . . . . . . . 9-1
Driving Information . . . . . . . . . . . . . 9-2
Starting and Operatin

Page 118 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (20,1)Chevrolet Sonic Owner Manual - 2012
5-20 Instruments and Controls
This indicates that the engine is not
receiving enough oil. The engine
could be low on oil, or could have
some other

Page 132 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (4,1)Chevrolet Sonic Owner Manual - 2012
6-4 Lighting
This warns others that you are
having trouble. Press and
momentarily hold again to turn the
flashers off.
Turn and Lane-Change
Signals

Page 209 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (1,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-1
Vehicle Care
General Information
General Information . . . . . . . . . . 10-2
California Proposition 65Warning . . . . . . . . .

Page 237 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (29,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-29
Headlamp Aiming
Headlamp aim has been preset at
the factory and should need no
further adjustment.
However, if the vehicle is d

Page 238 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (30,1)Chevrolet Sonic Owner Manual - 2012
10-30 Vehicle Care
High‐Beam Headlamp/
Low‐Beam Headlamp
1. Open the hood. SeeHood on
page 10‑4.
2. Remove the headlamp bulb access cover.
3

Page 239 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (31,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-31
5. Install the bulb socket into theheadlamp assembly by turning
clockwise.
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps

Page 240 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (32,1)Chevrolet Sonic Owner Manual - 2012
10-32 Vehicle Care
2. Turn the lamp assembly down toremove it from the fascia.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
3. Turn the bulb socket (A)
Page:   1-8 9-16 next >