2012 CHEVROLET SONIC warning

[x] Cancel search: warning

Page 200 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (32,1)Chevrolet Sonic Owner Manual - 2012
9-32 Driving and Operating
StabiliTrak OffLightTCS Off Light
StabiliTrak can be turned off if
needed by pressing and holding the
TCS/StabiliTrak b

Page 205 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (37,1)Chevrolet Sonic Owner Manual - 2012
Driving and Operating 9-37
Notice:This vehicle was not
designed for fuel that contains
methanol. Do not use fuel
containing methanol. It can
corro

Page 206 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (38,1)Chevrolet Sonic Owner Manual - 2012
9-38 Driving and Operating
When replacing the fuel cap, turn it
clockwise until it clicks. Make sure
the cap is fully installed. The
diagnostic sy

Page 209 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (1,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-1
Vehicle Care
General Information
General Information . . . . . . . . . . 10-2
California Proposition 65Warning . . . . . . . . .

Page 211 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (3,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-3
California Proposition 65
Warning
Most motor vehicles, including this
one, contain and/or emit chemicals
known to the State of Ca

Page 212 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (4,1)Chevrolet Sonic Owner Manual - 2012
10-4 Vehicle Care
Vehicle Checks
Doing Your Own
Service Work
{WARNING
You can be injured and the
vehicle could be damaged if you
try to do service

Page 219 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (11,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-11
Selecting the Right Engine Oil
Selecting the right engine oil
depends on both the proper oil
specification and viscosity grade.

Page 223 of 352

CHEVROLET SONIC 2012 2.G Owners Manual Black plate (15,1)Chevrolet Sonic Owner Manual - 2012
Vehicle Care 10-15
1.8L L4 Engine
1. Remove the two screws, tilt the cover, and slide it out of the
assembly.
2. Inspect or replace the engine air