2012 BUICK LACROSSE traction control

2
Exterior Lamps
ControlTurn Signal Lever/
Driver Information
Center ControlsInstrument
Cluster
Tilt/Telescopic
Steering Wheel
Lever Cruise
Control
ButtonsWindshield
Wipers Lever
Hood Release
Lever Storage/Fuse
Panel Access
Instrument Panel
Safety Belt
Reminder
Check Engine
Low Tire Pressure
Brake System
Warning
Antilock Brake
System WarningCharging System
Oil Pressure
Airbag Readiness
Security
Fog Lamps
Cruise Control On/Set
Traction Control OffStabiliTrak/Traction
Control Off
StabiliTrak/Traction
Control Warning
Lights On
Audio Steering
Wheel Controls
Symbols

10
A. NAV Navigation
Press to view the vehicle’s current
position on the map screen.
B. DEST Destination
Press to access the Route screen
to plan a destination.
C. RPT Navigation Repeat
Press to repeat the last voice guidance
prompt.
To select various system functions,
touch the highlighted touch screen
buttons in the on-screen menus or use
theMENU/SELECTknob.
Navigation System✦ Audio Steering Wheel Controls
Next/Previous
Rotate up or down to go to the next or
previous favorite radio station, CD track,
or MP3 file.
PushtoTalk
Press to interact with the OnStar or
Bluetooth system. Press and hold to
interact with the Navigation system✦.
End Call/Mute
Press to end or reject an OnStar or
a Bluetooth call. Press to mute the vehicle
speakers.
See Infotainment System in your Owner Manual.
Entering a Destination
1. Press theDESTcontrol button.
2. Touch one of the Select Destination menu options to plan a route. If you know the
specific address, touch theAddress Entryscreen button.
3. Enter the State/Province, City and Street name. Touch theListbutton to select the
desired name from the generated list for each entry.
4. Enter the house number. Touch theOKscreen button.
5. If the displayed address is correct, touch theGOscreen button.
6. Select the route preference and touch theStartscreen button.
See your Navigation System Owner Manual.
+ –
Volume
Press + or – to increase or decrease the
volume.
SRC Source
Press to select an audio source.
A
B
C
Note:When the vehicle is moving, various
on-screen functions are disabled to reduce
driver distraction.

13
Cruise Control
Adjusting Cruise Control
RES/+ Resume/Accelerate
Rotate the switch up to resume a set
speed.
When the system is active, rotate the
switch up to increase speed.
SET/– Set/Coast
When the system is active, rotate the
switch down to decrease speed.
Cancel
Press to cancel the cruise control
but retain the set speed in memory.
Pressing the brake pedal also will cancel
the cruise control.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.
Setting Cruise Control
1. Press theOn/Offbutton.
2. When traveling at the desired speed,
rotate theSET/–switch down to set
the speed.
When the cruise control is set, the
Cruise Controlsymbol will illuminate in
the instrument cluster.
• To apply the parking brake, pull up the parking brake switch by the shift lever.
• To release the parking brake, turn on the vehicle ignition, press the brake pedal and
press the switch.
See Driving and Operating in your Owner Manual.
Electric Parking Brake
Turning the Systems Off/On
• To turn off traction control, press the
StabiliTrak/Traction Controlbutton
(A). TheTraction Control Offlight
will illuminate.
• To turn off both traction control
and StabiliTrak, press and hold the
button. TheStabiliTrak Offlight
will illuminate.
• Press the button again to turn on both
systems.
See Driving and Operating in your Owner Manual.
StabiliTrak®/Traction Control Systems
The traction control system limits wheel-
spin, and the StabiliTrak stability control
system assists with directional control of
the vehicle in difficult driving conditions.
Both systems turn on automatically every
time the vehicle is started.
A