
11
Dashboard
At a glance
4
Exterior mirrors folding in and out 55
5 Adjusting exterior mirrors, automatic curb 
monitor 55
9 Instrument cluster 12 12
Ignition lock 61
13 Buttons on the steering wheel
15 Horn, entire surface
16 Adjusting the steering wheel 56
18 Releasing the hood 260
19 OBD socket 265
20 Opening the trunk lid 35
1
Convertible: opening and closing 
windows jointly
40 
2 Convertible: opening and closing 
rear windows
40 
3 Opening and closing front 
windows
40 
6 Parking lamps 110
Low beams 110
Automatic head lamp control110
Adaptive Light Control 112
High-beam Assistant 113
7 Fog lamps 114
8 Turn signals 71
High beams, headlamp 
flasher 112
High-beam Assistant 113
Roadside parking lamps 112
Computer 84
Settings and information about the 
vehicle 86
10 Windshield wipers 71
Rain sensor 72
11Switching the ignition on/off and 
starting/stopping the engine
61
Telephone: accepting and ending 
a call; dialing the selected phone 
number; redialing if no phone 
number is selected
Convertible: microphone on steer-
ing column
Volume
Activating/deactivating the voice 
activation system 25
Convertible: microphone on steer-
ing column
Changing the radio station
Interrupting a traffic bulletin
Selecting a music track
Scrolling through the redial list
Next entertainment source
Recirculated air mode 118
14 Steering wheel heating 56
17 Cruise control 75
Active Cruise Control 75
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

15
Dashboard
At a glance
6
CD/DVD drive 181
7 Changing
>Radio station 173
> Track 182
9 Controller 18 
Can be turned, pressed, or moved in four 
directions
10 Buttons on the controller 18
Selecting menus directly
12 Programmable memory keys 23
13 Switching entertainment audio sources on/
off and adjusting volume 170
14 Ejecting a CD/DVD 181
Automatic recirculated air control 
AUC and recirculated air 
mode
118
Maximum cooling 117
ALL program 119
Air volume 118
Defrosting windows 119
Rear window defroster 119
Seat heating 53
8 Park Distance Control PDC 96
Coupe: 
Roller sunblinds 126
Coupe: 
Hill Descent Control HDC 99
11 Convertible:
Opening and closing retractable 
hardtop
43
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

53
Adjustments
Controls
Seat heating
Press the button once per temperature level. 
Three LEDs indicate the highest temperature.
To switch off:
Press button longer.
If you continue driving within approx. the next 
15 minutes, the seat heating is automatically 
activated at the previo
usly set temperature.
The temperature is lowered or the heating is 
switched off entirely to save on battery power. 
The LEDs stay lit.
Seat and mirror memory
You can store and call up two different combi-
nations of driver's seat and exterior mirror posi-
tions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
Storing
1. Switch on radio readiness or the ignition, 
refer to page 61. 2.
Adjust the seat and exterior mirrors to the 
desired positions.
3. Press the  button.
The LED in the button lights up.
4. Press the desired memory button 1 or 2: 
the LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for th e remote control cur-
rently in use.
Call-up
Do not call up the memory while you are 
driving; otherwise,  unexpected seat 
movement could result in an accident. <
Comfort function
1.Unlock and open the driver's door or switch 
on radio readiness, refer to page 61.
2. Briefly press the desired memory button 1 
or 2.
The adjusting procedure  is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.
Safety feature
1. Close the driver's door and switch the igni-
tion on or off, refer to page 61.
2. Press the desired memory button 1 or 2 
and keep it pressed until the adjustment 
process has been completed.
If the  button was pr essed accidentally:
Press the button again; the LED goes out.
Safety belts
Observe the adjustment instructions on 
page 48 to ensure the best possible per-
sonal protection. <
Before every drive, make sure that all occupants 
wear their safety belts.  Airbags complement the 
safety belt as an additi onal safety device, but 
they do not represent a substitute.
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

55
Adjustments
Controls
Although there is a pinch protection sys-
tem, always check that the maneuvering 
area of the belt hand-ove r is clear. Otherwise it 
cannot be ensured that the system will stop 
moving in certain extreme situations. <
Mirrors
Exterior mirrors
The front passenger's mirror is more con-
vex than the driver's mirror. The objects 
seen in the mirror are cl oser than they appear. 
Do not gauge your distan ce from traffic behind 
you on the basis of what you see in the mirror; 
otherwise, there is an in creased risk of an acci-
dent. <
1 Adjustments
2 Switching to the other mirror or to the auto-
matic curb monitor
3 Folding mirrors in and out
The setting for the exterior mirrors is stored for 
the remote control currently in use. The stored 
position is called up  automatically when the 
vehicle is unlocked.
Manual adjustment
The mirrors can also be adjusted manually: 
press the edge of the glass.
Folding mirrors in and out
At driving speeds up to approx. 12 mph/
20 km/h, you can fold the mirrors in and out by 
pressing button 3. This can be beneficial in 
narrow streets, for example, or for moving mir- rors that were folded in by hand back out into 
their correct positions. 
Mirrors that have been 
folded in fold out automatically at a speed of 
approx. 24 mph/40 km/h.
Before entering an automatic car wash, 
fold in the exterior mirrors manually or 
with button 3 to prevent them from being dam-
aged, depending on the width of the vehicle. <
Automatic heating
Depending on the outside temperature, both 
exterior mirrors are heated automatically when 
the engine is running or the ignition is switched 
on.
Passenger side mirror tilt function – 
automatic curb monitor
Activating
1. Push the switch to the position for the 
driver's side mirror, arrow  1.
2. Shift into reverse or  engage the selector 
lever- or transmission position R.
The glass of the mirror on the passenger 
side tilts slightly down. This allows the 
driver to see the area immediately adjacent 
to the vehicle, e.g. a curb, when backing into 
a parking space.
Deactivating
Push the switch to the position for the passen-
ger side mirror, arrow  2.
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

56
ControlsAdjustments
Interior rearview mirror
Turn the knob to reduce glare from the head-
lamps of cars behind you when driving at night.
Interior and exterior mirrors, 
automatic dimming feature
The automatic dimming feature of the interior 
and exterior mirrors is controlled by two photo 
cells in the interior re arview mirror. One photo 
cell is in the mirror frame, see arrow; the other is 
on the back of the mirror.
In order to ensure that  the system functions 
correctly, keep the photo cells clean, do not 
cover the area between the interior rearview 
mirror and windshield, and do not affix adhesive 
labels or stickers of an y kind to the windshield 
directly in front of the mirror.
Steering wheel
Adjustments
Do not adjust the steering wheel position 
while the car is in mo tion; otherwise, there 
is a risk of an accident due to unexpected move-
ment. <
1. Fold the lever down.
2. Move the steering wheel to the preferred 
height and angle to suit your seated posi-
tion.
3. Swing the lever back up.
Do not use force to  swing the lever 
back up; otherwise, the mechanism 
will be damaged. <
Steering wheel heating
Press the button.
The LED in the button lights up when the steer-
ing wheel heating is switched on.
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

62
ControlsDriving
Ignition on
All electrical consumers can operate. The 
odometer and trip odometer are displayed in 
the instrument cluster.
When the engine is off, please switch off 
the ignition and any unnecessary electri-
cal consumers in order to preserve the bat-
tery.<
Radio readiness and ignition off
All indicator and warning  lamps as well as dis-
plays in the instrument cluster go out.
Starting the engine
Do not run the engine in enclosed areas; 
otherwise, the inhalati on of toxic exhaust 
gases can cause loss of consciousness and 
death. The exhaust gases contain carbon mon-
oxide, an odorless and colorless, but highly 
toxic gas. Never leave an unattended vehicle 
with the engine running; otherwise, such a vehi-
cle represents a pote ntial safety hazard. 
Before leaving the vehicl e with the engine run-
ning, always shift into ne utral or selector lever/
transmission position P and apply the parking 
brake forcefully to prevent the vehicle from roll-
ing. <
Avoid frequent starting in quick succes-
sion as well as repeated start attempts in 
which the engine does no t start. Otherwise, the 
fuel is not burned or  incompletely burned and 
there is a danger of overheating and damaging 
the catalytic converter. <
Do not wait for the engine to warm up while the 
vehicle remains stationary. Start driving right 
away, but at moderate engine speeds.
Manual transmission
Remote control in the ignition lock or, with 
Comfort Access, inside the vehicle, refer to 
page 38.
1. Depress the brake.
2. Depress the clutch an d shift into neutral.
3. Press the Start/Stop button.
The starter operates automatically for a certain 
time, and stops automatically as soon as the 
engine has started.
Automatic transmission
Remote control in the ignition lock or, with 
Comfort Access, inside the vehicle, refer to 
page 38.
1. Depress the brake.
2. Move the selector lever to position P.
3. Press the Start/Stop button.
The starter operates automatically for a certain 
time, and stops automatically as soon as the 
engine has started.
Sport automatic transmission with 
double clutch
Remote control in the ignition lock or, with 
Comfort Access, inside the vehicle, refer to 
page 38.
1. Depress the brake.
2. Press the Start/Stop button.
The engine starts independent of the current 
transmission position.
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

66
ControlsDriving
Upshifts and downshifts are executed only 
when they will result in a plausible combination 
of engine and vehicle speed; thus, for example, 
a downshift that would cause the engine to 
overrev will not be exec uted by the system.
The gear selected is briefly displayed in the 
instrument cluster, followed again by the gear 
actually in use.
Overriding selector lever lock
Should the selector lever  refuse to move out of 
position P even though the ignition is switched 
on, the brake is depressed and the button on 
the selector lever is pre ssed, the selector lever 
lock can be overridden:
1. Switch off ignition.
2. Unclip the sleeve of the selector lever.
3. Pull the sleeve up over  the selector lever 
until the sleeve is inside out.
4. Using the screwdriver from the onboard 
vehicle tool kit, refer to page 270, press the 
red lever and with the button pressed, 
simultaneously move th e selector lever to 
the desired position.
7-gear Spor t automatic 
transmission with double 
clutch
The concept
The 7-gear Sport automa tic transmission with 
double clutch is an automated manual trans-
mission with two clutches and secondary gear  sets in which the clutch
ing and shifting is han-
dled by an electrohydraulic system.
With the 7-gear Sport automatic transmission 
with double clutch, the gears are shifted without 
an interruption in driving power.
You operate the 7-gear Sport automatic trans-
mission with double clutch using the selector 
lever and two shift paddles on the steering 
wheel.
It offers you the following functions:
> Either manual or au tomatic mode: sequen-
tial mode or drive mode
> Automatic downshifting and protection 
against incorrect gear selection, even in 
sequential mode
> Acceleration assistan t, Launch Control, 
refer to page 70
> Automatic intermediate  throttle application
System limitations
The 7-gear Sport automatic transmission with 
double clutch has an overheating protection 
that protects the clutch from extreme loads.
The indicator lamp lights up in yellow if 
the transmission becomes too warm. 
Avoid high engine loads and frequent 
accelerations from zero. If the transmission is 
overheated, the indicator lamp lights up in red 
and the power flow to the  motor is interrupted. It 
is only possible to continue driving once the 
transmission has cooled down.
Avoid frequent powerful accelerations from 
zero and do not hold the  vehicle on inclines by 
pressing lightly on the  accelerator while letting 
the clutch slip, as this may cause the transmis-
sion to overheat.
Selector lever positions
P R N D M/S + –
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG  

117
Climate
Controls
6
Maximum cooling
7 AUTO program
8 Air volume, manual adjustment; AUTO 
intensity
9 Automatic recirculated air control AUC/
Recirculated air mode
10 Temperature, right side
11 ALL program 12
Defrosting windows and removing conden-
sation
13 Switching cooling func tion on/off manually
14 Rear window defroster
15 Seat heating, right side 53
16 Interior temperature sensor, please keep 
clear
17 Seat heating, left side 53
Automatic climate control
Comfortable interior climate
AUTO program7 offers the ideal air distribution 
and air volume for almost all conditions, refer to 
AUTO program below. All you need to do is 
select an interior temperature which is comfort-
able for you.
The following sections inform you in detail 
about how to adjust the settings.
Most settings are stored for the remote control 
currently in use, refer also to Personal Profile 
settings on page 31.
Adjusting air distribution manually
The air distribution can be 
switched on and off manually. The 
air is directed to the windshield, to 
the upper body area and to the 
footwell.
The automatic air distribution can be switched 
back on by pressing the AUTO button. The 
cooling function is swit ched on automatically 
and the manual air distribution setting is 
cleared.
Temperature
Turn to set the desired tempera-
ture.
The automatic climate control 
achieves this temperature as 
quickly as possible rega rdless of the season, 
using maximum cooling or  heating power if nec-
essary, and then  maintains it.
Avoid rapid switching between different tem-
perature settings. The  automatic climate con-
trol will not have sufficient time to adjust the set 
temperature.
Maximum heating power can be obtained with 
the highest setting, regardless of the outside 
temperature.
The system cools steadily in the lowest setting, 
regardless of the outside temperature.
Maximum cooling
Press the  button.
The system is set to the lowest 
temperature, maximum air volume 
and recirculated air mode.
Air flows out of the vent outlets for the upper 
body region. Open them for this purpose.
Air is cooled as quickly as possible:
> Above an outside temperature of approx. 
327/06
> When the engine is running
Online  Edition  for Part  no. 01 40 2 609  333 - \251  08/11  BMW AG