
90  Audi side  assist 
signal  light  will come  on  as  soon  as  the  other 
vehicle  is  in your  blind spot  and  is  detected by 
side  assist.  When the  difference  in  speed  is 
greater,  the  signa l light  will  not  come  on. 
Informational  and  alert  stage  signals 
Applies  to vehicles:  with  side  assist 
Side  assist  has  two  s ignal  stages: 
- the  informational  stage  signal,  and 
- the  a le rt  stage  signa l. 
Side  assist  helps you  by using  the appropriate 
signal  stage,  depending  on whethe r or  not 
you  have  activated  the  turn  signal,  and  thus 
have  indicated  that  you  are  or  are  not  chang
ing  lanes. 
Informational  stage  signal 
As long  as  you  have  not activated  the  turn  sig
nal,  side  assist  informs  you of detec ted  vehi 
cles  that  are  registered  as  being in a  notable 
l ocation  if you  were  to change  lanes.  Whenev 
er  the  detected  vehicle's  difference  in speed 
and  distance  is  registered  by side  assist  as  no
table,  the  signal  light  on  the  respective  m irror 
produces  muted  illumination. 
The  brightness  of  the  informational stage  sig
na l is  designed  not  to  be  as  intense,  so  that  it 
does  not  interfere  with  your  view  of  the  road 
when  you  are  driving  and  have no  intention  of 
changing  lanes.  When  you  look  in the  outside 
mirror,  you  can  clearly  see  the informat ional 
stage  signal. 
Alert  stage  signal 
When  you  activate  the  turn  signal,  and  side 
assist  has detected  a vehicle  in a  notable  loca
tion  on  that  part icular  side,  the signal  l ight  on 
this  side  mirror  flashes  bright ly . The  repeated 
brief  and  bright  flashing  of the  alert  stage 
signal  reminds  you  to  carefully check  traffic to 
the  rear  in the  outside  mirror and over your 
shoulder,  so  that  yo u can  safely  complete the 
lane  change 
c::> & in Safety  tips  on page  94. 
(D Tips 
The  brightness  of  the  signal  light  on  the 
outside  m irrors  can  be adjusted  with  the 
MMI c::> page  93. 
Driving situation:  Fast  approaching 
vehicles 
Applies  to  vehicles: with  side assist 
© 
@ 
Fig. 94 Side ass ist:  Fast approach ing ve hicles 
@ Signal  on  outside  mirror does  not  light 
up 
No vehicle  was  detected  by  the sensors . The 
signal  on  the  o utside  mirror  does not  light  up 
c::> & in Safety  tips  on page  94. 
@ Informational  stage  signal  lights  up 
A fast  approaching  vehicle  - in the left-hand 
lane  for  example  - was  detected  by the  sen
sors . Although  this  vehicle  is still  far  away,  it 
should  be taken  into account  if yo u were  to 
change  lanes,  due  to  the  considerab le  differ
ence  in speed.  The  informational  stage  s ignal 
on  the  outside  mirror  lights  up 
c::> page  90 . ..,.  

94  Audi side  assist 
right of your  travel lane,  depending  on  wheth
er  you  drive  in the  center  of your  lane  or  closer 
to  the  edge. 
If  you  drive  in narrow  lanes,  s ide  ass ist's  de
tection  area  may  a lso  include  other  lanes  -es
pecia lly if you  tend  to  drive  on  the  edge  of 
your  lane¢ 
fig. 99. Under  these  condit ions, 
vehicles  can  also  be  detected  that  are  two  lanes  away,  and  side  assist  then  could  switch 
between  the  informat ional  and  warning  stage 
signals . 
When  driving  in very w ide  lanes,  vehicles  in 
the  adjacent  lane  may  not  be  detected  be
cause  they  are  not  inside  the detection  area . 
Notes 
Messages in instrument  cluster  display 
Applies  to  vehicles:  with  side assis t 
If side  assist  turns  off  automatically,  the  indi
cator  light  on  the  button  wi ll go  out  and  you 
will see  a  message  in the  instrument  cluster 
d isplay: 
Audi  side assist: not  available.  sensors 
blocked 
The side  assist  sensors  are  built  into  the  rear 
bumper  on  the  left  and  right (not  visible  on 
the  outside) 
¢ page 88, fig. 91 . To ensure  that 
you  do  not adversely  affect  the  way  side  assist 
functions,  foreign  objects  (such  as  stickers  or 
b icycle  racks)  should  not  be attached  to  the 
a rea  on  the  rear  bumper  where  the sensors 
are  located.  If side  assist functions  are  ad
versely  affected,  you  will see  this message  in 
the  instrument  cluster  display.  Remove  any 
thing  that  may  be  blocking the  sensors . 
If  no  vehicle  is detected  for  a longer  period of 
time  while  driving, side  assist  will  also switc h 
off  a utomatica lly. 
Audi  side  assist currently  not  available 
If there  is a  temporary  problem  (such  as  the 
ve hicle's  battery  charge  being low),  s ide  ass ist 
cannot  be activated  tempo rari ly. 
Audi  side assist: system fault 
Have the  system  checked  by an  authorized  Au
di dealer  or  qualified  workshop. 
Audi side assist: not  available  when 
towing 
T he  radar  senso r's  view  is  limited  when  tow
ing  a trai le r. For  vehicles  with  a fa ctory  instal 
led  towing  hitch or  a trailer  hitch  that  was  in
stalled  later  according  to  factory  specifica
tions,  side  assist  is automatically  deactivated 
as  soon  as  the  electrical  connection  to  the 
trailer's  electrical  socket  is made,  and  this  sta
tus  message  appears  in the  instrument  clus 
ter  display . Deactivation  cannot  be  guaran
teed  when  using  a  retrofitted towing hitch 
that  was 
not installed  according  to  factory 
specifications. 
Safety  tips 
Appl ies to  vehicles : wi th  side assist 
The  side  assist  detection  may  be limited  when 
driving  aro und  narrow  street  corners,  on  hilly 
streets,  and  under  poor  weather  cond itions. 
It  is  possible  that  the  radar sensors  may  also 
detect  other  objects,  such  as  high  or  stag
gered  guardrails . 
Side  assist  does  not measure  actual  lane 
width.  The  system  assumes  a fixed lane  width. 
Detection  in the left and  right  lanes  is based 
o n  this  ass umed  lane  width . When  driving  on 
narrow  roads or when  driving  to  the  left  or 
right  of the  center  of  a trave l lane,  it  is poss i
ble  that  vehicles  will  be  detected  that  are 
not 
in the  lane  next  to  the  lane  you  are  using. 
A WARNING 
- Improper  reliance on the  side  assist  sys
tem  can  cause  collis ion s and  serious  per
sonal  injury: 
- Never  rely  only on  side  assist  when 
changing  lanes . 
- Always  check  rear  view  mirrors to  make 
sure  that  it  is safe  to  change  lanes. 
- Side  assist  cannot  detect  all vehicles  un-
der  all  conditions- danger of accident!  ..,.  

-Side assist  cannot  detect  vehicles  in time 
to  alert  you when  they  approach from 
behind  at  very  high  speed,  or fall  drop 
back very  quickly . 
- The radar sensor 's 
vision can be reduced 
or  entirely  blocked  by rain,  snow, and 
heavy spray . This can result  in  side assist 
not  adequately  detecting  vehicles or,  in 
some cases, not  detecting  them  at  all. 
Always  keep an eye on the  direction  you  are traveling  and the  relevant area 
around  the  vehicle. 
- Please note  that side assist  indicates 
there  are approaching  vehicles,  or  vehi
cles in your  blind  spot,  only  after  your  ve
hicle  has reached a driving  speed of  at 
least  19  mph  (30  km/h). 
- Side assist signal  does not  work  around 
tight  corners  (turning  radius  less than 
328  feet,  or  100  m). 
- Side assist  is no replacement  for  the  driv
er's full  attention.  The driver  alone  is re
sponsible  for  lane changes and similar  driving  maneuvers.  Always  keep an eye 
on the  direction  you are traveling  and the 
relevant  area around  the  vehicle. 
(D Note 
To ensure that  side assist  is not  adversely 
affected,  you should  not  block the  area on 
the  rear  bumper  where  the  radar sensors 
are located  with  foreign  objects  (such as 
with  stickers  or  bicycle  racks). 
If  the  positions  of  the  radar sensors  have 
been changed  as a result  of  a  rear end-col
lision,  for  instance, have side assist 
checked by an authorized  Audi  dealer for 
safety  reasons. 
Audi  side assist  95  

108  Parking  system 
Parking  system 
General  information 
Applies to  vehicles: Aud i pa rki ng syste m plus/Audi  park
ing  system plus  w ith  rear v iew camera 
Depending  on  your  vehicle's  equ ipment,  vari
ous  parking  aids  wil l help  you  when  pa rk ing 
and  maneuvering. 
The  Audi  p arking  sy ste m  p lu s  assists  you 
when  park ing  by p rov iding  audio  and  visual 
warn ings  abo ut  objec ts 
in front  of and behind 
the  vehicle¢ page  108. 
The  Audi  p arking  sy ste m  p lu s  with  rear view 
c am era  shows  the  area  behind  the  vehicle  in 
the  disp lay . Thi s  image  helps  you  when  paral
lel  parki ng  or  cross  parking.  The  system  a lso 
p rovides  the  parking  aid  audio  and  vis ual  sig
na ls 
¢ page  109. 
0) Tips 
For  information  on  clean ing,  refer  to 
¢page  202. 
Audi  parking  system 
plus 
Description 
Ap plies  to vehicles: with  park ing system  p lus 
Audi parking  system  plus  provides  audio  and 
visual signals  when parking . 
Sensors  are  located  in the  front  and  rear 
bumpers . 
If these  detect  an  obs tacle,  aud ible 
and  v isua l signa ls warn  you . The  range  at 
which  the  sensors  begin  to  measure  is approx
i ma tely: 
side  3 ft  (0.90  m) 
front 
4 ft ( 1. 20 m) 
side  2 ft  (0.60  m) 
rear  S.2 ft  (1.60  m) 
The  clos er you  get  to  the  obsta cle,  the  sho rter 
the  interval  between  the  audible  signa ls.  A 
continuous  tone  so unds  when  the  obstacle  is 
less  than  approximate ly  1 foo t (0.30  meters) 
away.  Do not  continue  driving  farther!  If  the  distance  to  an  obstacle  remains  con
stant,  the  volume  of  the  distance  warning 
gradua
lly drops  after  about  fo ur seconds  (this 
does  not  apply  in the  continuous  tone  range). 
Switching  on  and off 
Applies  to  vehicles: wit h parking  system plus 
Fig .  1 16 Center  console:  Parking system sw itch 
F ig.  117 MMI  d isplay:  visual distance  display 
Switching  on 
.,.  Switch  the  MMI on 
.,.  Activate  comfort  or auto  mode  in Audi drive 
selec t ¢ 
page  96. 
.,.  Shift  into  reverse  or 
.,.  Press  the  switch~ in the  center  conso le 
¢ 
fig . 116. A short  confirmation  tone 
sounds  and  the  indicator  light  in the  switch 
lights  up. 
Switching  off 
.,.  Drive faste r th an  6  mph  ( 10  km/h),  or 
.,.  press  the  switch 
~ or 
.,.  switch  off the  ignition. 
Segments  in the  visual  display 
The  red  segments  in front  of  and  behind  the 
vehicle ¢ 
fig.  117 help yo u to  dete rm ine  the 
distan ce  between  yo u and  an  obstacle.  As 
you r vehicle  comes  close r to  the  obstacle,  the  .,.  

segments  move  closer  to  the  vehicle. The col
lision  area  has  been  reached  when  the  next  to 
last  segment  is displayed.  Do not  continue 
driving  farther 
c:> ,& ! 
A WARNING 
- Sensors  have  blind spots  in which  objects 
cannot  be  detected . Pay special  attention 
to  small  children  and  animals  because 
the  sensors  cannot  always  detect  them . 
- The  parking  system  cannot  replace  the 
driver's  attention.  The driver  alone  is  re
sponsible  for  parking  and  similar  driving 
maneuvers. 
-Always  keep  your  eyes  on  the  veh icle's 
surround ings,  using  the  rear 
view mirror 
as  well. 
(D Note 
Low obstacles  already  signaled  by a warn
ing  can  disappear  from  the system 's  detec
tion  range  as  they  are  approached  and  will 
not  continue  to be  signaled.  Objects  such 
as  barrier  chains,  trailer  draw  bars,  thin 
pa inted  vertical  poles  or  fences may  not  be 
detected  by the  system,  posing  risk of 
damage. 
(D Tips 
- The sensors  must  be kept  clean  and  free 
of  snow  and  ice for  the  park assist  to  op
erate. 
- You can  change  the  volume  and  pitch of 
the  signals  as  well  as  the  display 
<=> page 113. 
-What  appears  in the  display  is time-de
l ayed. 
Parking  system  109 
Audi  parking  system 
plus  with  rear  view 
camera 
Introduction 
App lies  to vehicles:  park ing  system  p lus  wit h rear  view 
came ra 
Fig. 118 Park ing  mode  1: reverse  parking 
Fig . 1 19 Park ing mode  2: parallel  parking 
This parking  system  integrates  a rearview 
camera 
in addition  to  the audio and visual 
parking  system  signals 
¢ page 108. 
0 0 ± .. a, 
You can  choose  between  two  modes  to  assist 
you w ith  parking.  For example,  you  can  use 
"parking  mode  1" when  parking  in a  parking 
space  or  garage 
c:> fig . 118. When  you  want  to 
park  para llel  to  the  edge  of  the  street, select 
"p arking  mode 2" 
<=>fig. 119 .  

110  Parking system 
General  Information 
A pplies  to vehicles:  with  par king system  p lus w it h  rear 
view  ca mera 
Fig.  120  Area covered 
(D and  area not covered @ by 
the  rear  view  came ra. 
Fig.  121 Rear  lid : Locat ion of  the  rear view  camera 
Rear view  camera  coverage area 
The  MMI display  shows  the  area  covered  by 
the  rear  view  camera 
c::;, fig. 120 (i). Objects 
that  are  not  in the  area  covered  @are  not 
shown  on  the  MMI display. 
N 0 
9 (!) 
~ 
We  recommend  that  you  practice  park ing  with 
the  rear  v iew  camera  in a traffic-free  locat ion 
or  parking  lot  to  become  familiar  w ith  the  sys
tem,  the  orientation  l ines,  and  their  funct ion . 
When  doing  th is, there  shou ld be  good  light 
and  weather  conditions. 
In  the  MMI display,  objects  or vehicles  appear 
closer  or  further away if: 
- you  are  driving  in reverse  gear  from  a  level  surface  onto  an  incline  or  a  downward  slope, 
- you  are  driving  in reverse  gear  toward  pro
truding  objects, 
- the  vehicle  is  carrying  too  much  load  in the 
rear. 
The  accuracy  of the  orientat ion  lines  and blue 
surfaces  diminishes  if:  -
the  rear  view  camera  does  not  provide  a  reli
ab le  image,  for  example,  in poor  visibility 
conditions  or  if the  lens  is  dirty, 
- the  image  on  the  screen  is  not  visib le  due  to 
sun  glare  and  reflection. 
Caring for  the  rear view  camera  lens 
T he  rea r view  camera  is located  above the rear 
lic ense  plate  bracket.  For  the  parking system 
to  operate,  the  lens 
r:!> fig. 121 m ust  be  kept 
clean: 
- Dampen  the lens  w ith a  household  alcohol
based  g lass  cleaner,  and  then wipe  the lens 
clean  with  a dry  cloth 
c::> (D . 
-Remove  snow with a hand  br ush and  ice 
preferably  with  a  de-ic ing  spray 
c::> (j) . 
_& WARNING ,= --Sensors  have blind  spots  in which  objects 
cannot  be detected . Pay specia l attention 
to  small  children  and  an imals  because 
the  sensors  cannot  always  detect  them. 
- The  parking  system cannot replace  the 
driver's  attention.  The  driver  alone  is re
sponsible  for  parking  and  similar  driving 
maneuvers. 
- Always  keep  your  eyes  on  the  vehicle's 
surroundings,  using the  rear  view  mirror 
as  well. 
- Do not  allow yourself  to  be  distracted 
from  traffic  by the  rea r view  camera  pic
tures. 
- If  the  position  and  the  installation  angle 
of the  camera  has  changed,  for  example, 
after  a rear  end  coll ision,  do  not continue 
to  use  the  system  for  safety  reasons . 
Hav e it  checked  by a qualified  dealership. 
(D Note 
-Low obstacles  a lready  s ignaled  by a 
warning  can  disappear  from  the  system's  detection  range  as  they  are  approached 
and  will  not  continue  to  be  signaled.  Ob
jects  such  as  barrier  chains,  trailer  draw 
bars,  thin  painted  vertical  poles  or  fen
ces  may  not  be  detected  by the  system, 
posing  risk  of  damage.  

-Never use warm  or  hot  water  to  remove 
snow or  ice from  the  rear view  camera  l ens - th is could  cause the  lens to  crack! 
- When  cleaning  the  lens, never use prod
ucts that  are abrasive . 
Switching  on and  off 
Applies  to  vehicles:  with  pa rk in g system  p lus  wit h  rear 
view  ca mera 
The rear view camera  switches  on automati
cally together  with  the  acoustic  and  visual 
park  assist  when you  put  the  vehicle in re
verse . 
Switching  on 
.,.  Switch  the  MMI  on 
.,.  Activate 
co mfort  or auto mode  in Audi  drive 
select ¢ 
page 96. 
.,.  Sh ift  into  reve rse or 
.,.  Press the  switch 
lp.,,, I in the  cente r console 
¢ 
page  108,  fig.  116 . A short  confirmation 
tone  sounds  and th e indicator  light  in the 
switch  lights  up. 
Sw itching  betwe en th e rear  view  camer a 
a nd  vis u al di splay 
.,.  Press the Gr aphi c control  button 
¢page  112, fig . 122 @to see the  visua l 
display . 
.,.  Press the 
Rear vie w control  button  to  see 
the  rear view  camera  image 
Q page  108, 
fig . 117 . 
Switchin g off 
.,.  Drive faster  than  6  mph  (10  km/h),  or 
.,.  press the  switch ~ or 
.,.  switch  off  the  ignit ion. 
A WARNING 
- The MMI  display  cannot  show, or  cannot 
adequate ly show, certa in objects  (such as 
small  posts o r grating),  recesses in the 
ground  and protrud ing parts  on another 
car. 
- Only use the  rear v iew camera to  assist 
you  if  it  shows a good,  clear  pictu re . For 
example,  the  image  may be affected  by 
Par king  system  11 1 
the  sun shining  into  the  lens,  dirt  on the 
lens or  if  there  is a defect . 
- Use the  rear view  camera on ly with  the 
rear lid  comp lete ly closed.  Make sure any 
objects  you  may have mounted  on the 
rear lid  do not  b lock the  rear v iew cam
era. 
(D Tips 
- The sensors  must  be kept  clean and free 
of  snow and  ice for  the  park  assist to  op
erate . 
- If  your  veh icle is near an obstacle,  an ad
ditional  v isual  ind icator  appears in the 
rearview  camera  image . Th is superim
posed image  is there  to  help  you to  de
termined  wh ich area of  the  vehicle  is af
fected  . 
- Yo u can change the  volume  and  pitch  of 
the  s ignals  as we ll as the  disp lay 
Q page  113. 
-What  appears  in the  display  is time-de
layed .  

114  Parking  system 
Off  -when  the  park ing  system  is switched  off, 
only  audible  signals  are  given. 
Warning  tones 
Front  v olume  -front  senso r volume 
Front  fr equ enc y -front  sensor  frequency 
Rear v olume  -rear  sensor  volume 
Rea r frequ enc y -rear  sensor  freq uency 
Mu sic vo lume  whil e parking  -when  the  park
ing  system  is switched  on,  the  volume  of the 
active  audio  sou rce  is  lowered. 
The  newly  adjusted  value  is  briefly  heard  from 
the  signa l generator. 
(Di Tips 
- The  warning  tones  can  a lso  be  adjusted 
directly  by the  v isual  display  or the  p ic
ture  from  the  rear  v iew  camera.  Simp ly 
press  the 
S etting s contro l button. 
- Changed  settings  are  activated  when 
parking  system  is switched  on  again. 
-The sett ings are automatically stored 
and  ass igned  to  the  remote  control  key. 
Error  messages 
App lies  to  vehicles: with  pa rking system  p lus or parking 
syste m plus with  rear v iew camera 
There  is an  error in the  system  if the LED on 
the ~ switch  is blinking  and you  hear  a con
tinuous  alarm  for  a few  seconds  after  switch ing  on  the  parking  system  or when  the  park
i ng  system  is already  act ivated.  Have your  au
thor ized  Audi  dealer  correct  the  e rror . 
{D) Tips 
If the  error  is  not  corrected  before  you 
sw itch  off  the  ignition,  when  you  switch  on 
the  par king  system  aga in,  the  LED in  the 
~ switch  w ill blink.