2012 Alfa Romeo Giulietta height adjustment

50
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
Height adjustment
(for versions/markets, where provided)
Move lever B up or down until the required height is achieved.
IMPORTANT Carry out the adjustment whilst seated in the driver’s
seat.
Backrest angle adjustment
Turn C knob until the required position is reached.
SEATS
FRONT SEATS fig. 22
fig. 22A0K0076m
All adjustments must be made with the car sta-
tionary.
Lengthwise adjustment
Lift A stalk and push the seat forwards or backwards: in the driving
position your arms should rest on the rim of the steering wheel.
After releasing the adjustment lever, always check
that the seat is locked on the guides by trying to
move it back and forth. If it is not locked, the seat
may move unexpectedly and make you lose control of
the car.
For maximum protection, keep the back of your
seat upright, lean back into it and make sure the
seat belt fits closely across your chest and hips.

51
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
Heated seats
(for versions/markets, where provided)
With the key turned to MAR, press A button fig. 23 to switch the
function on/off. When the function is enabled, the LED on the but-
ton turns on.
Electric lumbar adjustment
(for versions/markets where provided)
With the key turned to MAR, press B button fig. 23 to switch the
function on/off. When the function is enabled, the LED on the but-
ton turns on.
fig. 23A0K0213m
ELECTRICALLY ADJUSTABLE FRONT SEATS
fig. 24
(for versions/markets, where provided)
The following controls are provided for adjusting the seats:
Multifunction A control:
❍front seat height adjustment (seat vertical movement);
❍seat lengthwise movement
B: Backrest angle and lumbar adjustment;
C: Driver’s seat position storing buttons.
fig. 24A0K0214m

53
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
HEAD RESTRAINTS
FRONT HEAD RESTRAINTS
Head restraints are adjustable in height and they lock automati-
cally in the required position:
❍upward adjustment: lift the head restraint until it locks
❍downward adjustment, press the A button fig. 26 and lower
the head restraint.
fig. 26A0K0064m
Head restraints must be adjusted so that the head,
rather than the neck, rests on them. Only in this
case they can protect your head correctly.
To remove the head restraints:
❍raise the head restraint to its maximum height;
❍press A and B buttons fig. 26 and then remove the head re-
straints by sliding them upwards.
“Anti-Whiplash” device
The head restraints are equipped with an “Anti-Whiplash” device,
which reduces the distance between head and head restraint in the
event of a rear impact, thus mitigating the “whiplash” effect.
The head restraint may move when the backrest is pressed by
the occupant’s torso or hand: this is an effect of the system and
not a fault.

54
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
REAR HEAD RESTRAINTS
Two height-adjustable head restraints are provided for the back
seats (to adjust the height see the previous paragraph). On some
versions a head restraint is also provided for the central seat.
To remove the head restraints:
❍raise the head restraints to their maximum height;
❍press A and B buttons fig. 27 and then remove the head re-
straint by sliding it upwards.
STEERING WHEEL
It can be adjusted axially and vertically.
To adjust, release A lever fig. 28 by pushing it forwards (position
1) and adjust the steering wheel. Then lock lever A by pulling it
towards the steering wheel (position 2).
fig. 27A0K0065mfig. 28A0K0077m
Any adjustment of the steering wheel position must
be carried out only with the car stationary and the
engine turned off.
It is absolutely forbidden to carry out any after-
market operation involving steering system or
steering column modifications (e.g. installing an
anti-theft device) that could badly affect performance and
safety, invalidate the warranty and also result in the car
failing to comply with regulations.