269
SOUND SYSTEM
R R
A A
D D
I I
O O
( (
T T
u u
n n
e e
r r
) )
INTRODUCTION
When the radio is turned on the last func-
tion selected before it was switched off is
activated: Radio, CD, CD MP3, Media Play-
er (only with Blue&Me™) or AUX (only
with Blue&Me™) (for versions/markets,
where provided).
To select the Radio function whilst listening
to another audio source, press the FM
ASor
AM buttons briefly, depending on the desired
band.
Once the Radio mode has been activated,
the display will show the name (RDS sta-
tions only) and the frequency of the select-
ed radio station, the frequency band select-
ed (e.g. FM1) and the preselect button num-
ber (e.g. P1).
FREQUENCY BAND
SELECTION
With the Radio mode activated, press the FMAS
or AM button briefly and repeatedly to select
the desired reception band.
Each time the button is pressed the follow-
ing bands are selected cyclically:
❍Pressing the FMASbutton: “FM1”,
“FM2” or “FMA”;
❍Pressing the AM button: “MW1” and
“MW2”.
Each band is highlighted by the name in the
display. The last station selected on the re-
spective frequency band will be tuned into.
The FM band is divided into sections: FM1,
FM1 or “FMA”; the FMA reception band is
reserved for broadcasters stored automati-
cally using the AutoSTore function.
PRESET BUTTONS
The buttons numbered from 1 to 6 can used
to set the following presettings:
❍18 on the FM band FM (6 on FM1, 6
on FM2, 6 on FMT or “FMA” (on some
versions);
❍12 on the MW band (6 on MW1, 6 on
MW2).
To listen to a preset station, select the desired
frequency band and then briefly press the cor-
responding preset button (from 1 to 6).
By pressing the preset button for more than
2 seconds, the station tuned into will be
stored. The storing phase is confirmed by an
acoustic signal.
STORING THE LAST STATION
LISTENED TO
The radio automatically stores the last sta-
tion that was selected for each reception
band, which is then tuned into when the
radio is turned on or when the reception
band is changed.
276
SOUND SYSTEM
A A
U U
X X( (
o o
n n
l l
y y
w w
i i
t t
h h
B B
l l
u u
e e
& &
M M
e e
™ ™
) )
( (
f f
o o
r r
v v
e e
r r
s s
i i
o o
n n
s s
/ /
m m
a a
r r
k k
e e
t t
s s
, ,
w w
h h
e e
r r
e e
p p
r r
o o
v v
i i
d d
e
e
d d
) )
INTRODUCTION
This chapter describes the variants regard-
ing the operation of the AUX source: as far
as the operation of the radio is concerned,
refer to the description in the “Functions and
Adjustments” chapter.
AUX MODE
To activate the AUX source, press the MEDIA
button or the SRC steering wheel control sev-
eral times till the corresponding source is dis-
played.
IMPORTANT NOTES
The functions of the device connected with
the AUX socket are directly managed by the
device itself; it is not possible to change
track/folder/playlist with radio or steering
wheel controls.
Do not leave the cable of your portable play-
er connected with the AUX socket after the
disconnection, to avoid possible hisses from
the speakers.NOTE The AUX socket is not incorporated
in the radio. For its position, refer to the
Blue&Me™ Supplement and its Quick
Guide.
