2012 Acura TL remote control

9
1\f
11
C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
Some examples on how to program vehicle settings.
1.
Turn the vehicle on.
2.Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS\b TREBLE\b etc.).
3. Set your preferred climate
control settings (fan speed\b
temperature\b etc.).
4. Once you turn the car off\b your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
3. Press and hold the SET button
until you hear a beep\b then
release.
2. Adjust your preferred seat and
outside mirror settings.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
Tech/Advance model shown
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle.
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
1. Select “CHANGE SETTINGS.”
3. Select “AUTO DOOR
UNLOCK.”4. Select “ALL DOORS With
SHIFT TO P.”
5. Once the setting has been saved\b select“EXIT.”
Five groups of settings can be programmed using the MID*: Meter Setup\b
Position Setup\b Keyless Access Setup (if equipped)\b Lighting Setup\b and
Door Setup.
SEL/RESET
button
Info
buttons
Presseither Info button to toggle
to the “Customize Settings”
display\b then pressSEL/RESET to
activate the menu.
P r o g r a m m i n g t h e A u t o D o o r U n l o c k S e t t i n g
* See “Customize Settings” in your owner’s manual for other programmable settings\b
2. Select “DOOR SETUP.”
1.Turn the vehicle on. Shiftinto
Park (P)\b or set the parking brake
for manual transmission vehicles\b
12 TL ATG\fATG_NEW STYLE 1/27/2011 1\f32 PM Page 7

12131\f
R E A R V I E W C A M E R A( T e c h \b A d v a n c e )
For added convenience\b the area behind your vehicle is displayed to help
you navigate while backing up.
• When you shift into Reverse\b a realtime image
of the area behind your vehicle is shown in the
navigation display.
• Yellow parking guidelines appear to help you judge distance.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of Reverse.
H o w I t W o r k s
11
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R)\b you can tilt either outside door mirror down slightly to
improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror
to its original position.
• To tilt the driver’sdoor mirror\b movethe
mirror selector switch
to the left (L) position.
• To tilt the passenger’s side door mirror\b
move the mirror
selector switch to the
right (R) position.
• To turn the feature off\b move the switch
to the middle
position.
H O M E L I N K ®
Press and hold thebutton on the
remote and the HomeLink buttonat
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2seconds.
Does the LED blink at a faster ratewithin 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Pressthe “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.a
Press and hold theprogrammed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remotecontrolled devices around your home\b such as garage
doors\b lighting\b or home security systems.
If you have any problems programming HomeLink\b see the owner's manual
included with the device you are trying to program\b call HomeLink at
(8\f\f) 3553515\b or visit www\bhomelink\bcom\b
12 TL ATG\fATG_NEW STYLE 1/27/2011 1\f32 PM Page 8

28
B L \f E T O O T H®A U D I O
Play audio files from your compatible phone through your vehicle’s audio
system. Visit www\bacura\bcom/handsfreelink to check if this feature is
available on your phone.
1. Make sure your phone is on and paired
toBluetooth®HandsFreeLink (see page
2\b).4. Press the SKIP buttons on the
audio panel or the +/ (CH)
buttons on the steering wheel
to change tracks.*
2. Press HDD/AUX
repeatedly until
“Bluetooth Audio”
appears.
3. Press “play” on
your phone; sound
is redirected to the
audio system.
Make sure the
volume on your
phone is adjusted.
H A R D D I S C D R I V E ( H D D ) A U D I O( T e c h \b A d v a n c e )
Automatically record CDs onto your vehicle’s hard drive (by system
default). Songs begin to record once a CD is inserted into the disc slot.
P l a y i n g H D D A u d i o F i l e s
1. Press AUDIO.
2.Press HDD/AUX. 3. The first song of the last
recorded album or the last
song selected plays. Press()
or () or (+) or () on the
remote audio controls to skip
through songs.
S e a r c h i n g f o r M u s i c
2. Select one of the categories. 3.
Select a track and press
ENTER to begin play.
29
P l a y i n gBluetoothA u d i o F i l e s
3\f 31
R e c o r d i n g S o n g S a m p l e s
N O T E F U N C T I O N( T e c h \b A d v a n c e )
Store up to 3\f tensecond recordings of songs and song information from XM®Radio
(with an active subscription).
1. Press and hold XM for about 2
seconds. 3.
Turn the selector knob to select
“NOTE\b” then pressENTER.
4. Turn the selector knob to select a
sound file\b then pressENTER. The
selected recording plays.
2. To replay stored information\b
push
the interface dial down.
* not supported on all phones
1. From the audio screen\b push
the selector up to select MUSIC
SEARCH.
12 TL ATG\fATG_NEW STYLE 1/27/2011 1\f35 PM Page 17

2.\fonnect the USB connector to your
iPod dock connector or flash drive.
1. Open the center console\b and
pull out the USB adapter cable.
i P o d ® o r U S B F L A S H D R I V E
Play audio files from your compatible iPod or USB flash drive through your vehicle’s
audio system. See your Owner’s Manual for a list of compatible devices.
C o n n e c t i n g a n d P l a y i n g A u d i o F i l e s
*iPod is a registered trademark of Apple Computer\b Inc.\b registered in the U.S. and other countries. iPod not included.
4.
Press () or () on the audio
control panel or (+) or () on the
remote audio controls to skip
through songs.
3. Press AUX or HDD/AUX to begin
playing.
NOTE: When applicale\b album artwork from a currently playing track appears
on the navigation audio display (Tech/Advance only.)
28 29
32
33
S O N G B Y V O I C ET M( S B V )( i P o d ® \b H D D )
Play songs from your iPod and HDD from most navigation/audio screens by using
simple voice commands.
P l a y i n g A u d i o F i l e s U s i n g V o i c e C o m m a n d s
U s i n g t h e “ P l a y ” C o m m a n d
Press and release the Talk button before you give a command.
The system
provides voice
feedback and
lists possible
matches.
The system
plays the
selection
and returns
to the Search
Mode
screen.
Say “iPod
search” or
“HDD search\b”
Say “Play”
and one of
the options on
the Search
Mode screen.
For example\b
say “Play Artist
XYZ\b”
Saythe
number of the
corresponding
selection you
wish to play.
For example\b
say “Four\b”
if exact
matchfound if exact
match
not found
12 TL ATG\fATG_NEW STYLE 1/27/2011 1\f35 PM Page 18