2012 Abarth 500 technical specifications

146
WARNING
LIGHTS AND
MESSAGES
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
FUEL FEED/IGNITION
1.4 TB BZ ABARTH
Fuel feed Multipoint electronic injection
phased, sequential,
with fixed geometry turbocharger
Modifications or repairs to the fuel feed system that are not carried out properly or do not take the system’s
technical specifications into account can cause malfunctions leading to the risk of fire.
WARNING
TRANSMISSION
1.4 TB BZ ABARTH
Gearbox
Clutch
DriveFive forward gears plus reverse
with synchronisers for forward gears
Self-adjusting with pedal without idle stroke
Front

147
WARNING
LIGHTS AND
MESSAGES
INDEX
YOU CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
SUSPENSIONS
1.4 TB BZ ABARTH
Front
Rear
BRAKES
1.4 TB BZ ABARTH
Service brakes:
– front
– rear
Parking brake
IMPORTANT Water, ice and salt sprinkled on the roads may deposit on the brake disks reducing braking efficiency
the first time the brakes are applied.
STEERING
1.4 TB BZ ABARTH
Type
Diameter of steering between
platforms mwith Mc Pherson type independent wheels; consisting of a mechanical crosspiece,
shock absorbers, helical springs and stabilizer bar.
with torquing axle and interconnected wheels; consisting of torquing axle and
two tubular arms with shock absorbers and helical springs.
rack and pinion with dual strategy electric power steering (normal/sport)
10.8 disk type (self-ventilated disc)
solid disc
controlled by hand lever, acting on rear brakes

148
WARNING
LIGHTS AND
MESSAGES
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
READING TYRE
MARKINGS fig. 4
Example: 175/65 R 14 82H
175 = Nominal width (S, distance in mm
between sidewalls).
65 = Height/width ratio (H/S) in per-
centage.
R = Radial tyre.
14 = Rim diameter in inches (Ø).
82 = Load rate (capacity).
H = Maximum speed rating.
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless ra-
dial carcass tyres. All approved tyres are
listed in the Log Book.
IMPORTANT In the event of discrepan-
cies between the information provided on
this “Owner handbook” and the “Log
book”, consider the specifications shown
in the log book only.
Respect the prescribed size to ensure
safety of the car in movement. Fit tyres
of the same make and type on all wheels.
IMPORTANT Do not use inner tubes
with Tubeless tyres.
fig. 4F0S127Ab
WHEEL GEOMETRY
Toe-in measured between rims:
0,5 ± 1 mm
The values refer to the car in running or-
der.

149
WARNING
LIGHTS AND
MESSAGES
INDEX
YOU CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
READING RIM MARKINGS fig. 4
Example: 5,00 B x 14 H2
5,00 = rim width in inches 1.
B = rim drop centre outline (side
projection where the tyre bead
rests) 2.
14 = rim nominal diameter in inches
(corresponds to diameter of the
tyre to be mounted) 3= Ø.
H2 = shape and number of the “humps”
(circumference relief, holding into
its seat the bead of the Tubeless
tyre on the rim).
Load rating (capacity)
70= 335 kg 81= 462 kg
71= 345 kg 82= 475 kg
72= 355 kg 83= 487 kg
73= 365 kg 84= 500 kg
74= 375 kg 85= 515 kg
75= 387 kg 86= 530 kg
76= 400 kg 87= 545 kg
77= 412 kg 88= 560 kg
78= 425 kg 89= 580 kg
79= 437 kg 90= 600 kg
80= 450 kg 91= 615 kg Maximum speed rating
Q= up to 160 km/h.
R= up to 170 km/h.
S= up to 180 km/h.
T= up to 190 km/h.
U= up to 200 km/h.
H= up to 210 km/h.
V= up to 240 km/h.
W= up to 270 km/h.
Maximum speed rating
for snow tyres
QM + S= up to 160 km/h.
TM + S= up to 190 km/h.
HM + S= up to 210 km/h.
fig. 5F0Q760m
TYRES RIM PROTECTOR fig. 5
If after-sale tyres with rim
protector are used (fig. 5)
and the car has integral cups fixed (by
springs) to the sheet wheel, DO NOT
fit wheel cups. The use of unsuitable
tyres and wheel cups could cause a
sudden pressure loss of the tyre.
WARNING

150
WARNING
LIGHTS AND
MESSAGES
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
195/45 R16 84 V XL*
205/40 R17 84 W XL**
COLD INFLATION PRESSURE (bar)
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
Tyres Medium load * Full load
Front rear Front Rear
195/45 R16 84 V XL 2.3 2.1 2.6 2.4
205/40 R17 84 W XL 2.3 2.1 2.6 2.4
* At speeds above 160 km/h, use the inflation pressures for the maximum load conditions.
Versions Rims Tyres TyresStandard tyre Snow tyre
1.4 TB BZ ABARTH
* 7 mm chains can be fitted.
** Winter tyres (Pirelli Snow Sport 195/45 R16) are also available to be used if the car is mainly driven on snow-covered roads. 6
1/2J x 16H2-ET35
7 J x 17H2-ET38

151
WARNING
LIGHTS AND
MESSAGES
INDEX
YOU CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
DIMENSIONS
Dimensions are expressed in mm and re-
fer to the vehicle fitted with standard
tyres.
The height refers to the vehicle unladen.
Boot volume
Unladen boot volume
(V.D.A. standards) .................... 185 litres
F0S128Abfig. 6
Versions A B C D E F G I
1.4 TB BZ ABARTH3657 776 2300 581 1480/1485(▲) 1415/1409(▲) 16271408/1402(▲)
(
▲) With 205/40 R17 tyres

152
WARNING
LIGHTS AND
MESSAGES
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
PERFORMANCETop admitted speed after initial car use in km/h.
1.4 TB BZ ABARTH205

153
WARNING
LIGHTS AND
MESSAGES
INDEX
YOU CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
1.4 TB BZ ABARTH
1035
390
830
640
1425
800
400
50
60
WEIGHTS
Weights (kg)
Unladen weight (with all liquids,
fuel tank filled to
90% and without optional equipment):
Carrying capacity (*) including the driver:
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, etc.) the unladen car weight increases, thus reducing the specified payload.
(**) Loads not be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they comply
with these limits.