2012.5 Peugeot RCZ Owner's Manual - RHD (UK, Australia)

1/
INSTRUMENTS and CONTROLS

DATA DISPLAYS



)
Press the button, located at the end of the wiper stalk
, to display
the various trip computer tabs in succession.



)
Press the up and down arrows on the navigator for the instrument
panel with large central screen to display the various trip computer
tabs in succession.



With the large central screen











Instrument panel with small central screen

Instrument panel with large central screen

With the small central screen


System that gives you information on the journey in progress (range,
fuel consumption…).

1
2
40



- The current information tab with:


●
the range,

●
the current fuel consumption.



- The trip "1"
tab with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the fi rst trip.



- The trip "2"
tab with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the second trip.



)
Pressing the button again takes you to a black screen.
A further press returns you to the normal display.



TRIP ZERO RESET



)
When the trip required is displayed, press the button at the end of
the wiper stalk
for more than two seconds.



With the large central screen



)
When the required trip is displayed, press the "OK"
button on the
navigator
for the instrument panel with large central screen.



With the small central screen


Trips "1"
and "2"
are independent but their use is identical.
Trip "1"
permits, for example, daily calculations, and trip "2"
monthly
calculations.

1/
INSTRUMENTS and CONTROLS






TRIP COMPUTER, A FEW DEFINITIONS


Range

(miles or km)
The distance which can still be travelled with the fuel
remaining in the tank. Related to the average fuel consumption over the
last few miles (kilometres) travelled.

This value may vary following a change in the style of driving
or the relief, resulting in a signifi cant change in the current fuel
consumption.

If dashes are displayed continuously while driving in place of the
digits, contact a PEUGEOT dealer or a qualifi ed workshop.

This function is only displayed from 20 mph (30 km/h).
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).


Current fuel consumption

(mpg or l/100 km or km/l)
Calculated over the last few seconds.


Average fuel consumption

(mpg or l/100 km or km/l)
Calculated since the last trip computer reset.


Average speed

(mph or km/h)
Calculated since the last trip computer reset.


Distance travelled

(miles or km)
Calculated since the last trip computer reset.

42
MONOCHROME SCREEN C (WITH
PEUGEOT CONNECT SOUND (RD5))

DISPLAYS IN THE SCREEN

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if there is a risk of ice),

- state of the openings (doors, boot...),

- visual parking sensors.

- audio functions,

- telephone information and directories.
Warning messages (e.g.: "Emission control system faulty") or
information messages (e.g.: "Automatic lighting of headlamps
activated") may appear temporarily. These can be cleared by pressing
the "Back"
button.


CONTROLS

From the control panel of your Peugeot Connect Sound (RD5), you can:


)
press the "MENU"
button for access to the main menu
,

)
press the " 
" or " 
" buttons to scroll through the items on the
screen,

)
press the "MODE"
button to change the permanent application
(audio source, telephone...),

)
press the " 
" or " 
" buttons to change a setting value,

)
press the "OK"
button to confi rm,
or


)
press the "Back"
button to abandon the operation in progress.

1/
INSTRUMENTS and CONTROLS

MAIN MENU



)
Press the "MENU"
button to gain access to the main menu
:


- audio functions,

- vehicle diagnostics,

- personalisation-confi guration,

- telephone (Bluetooth system).

)
Press the " 
" or " 
" buttons to select the menu required, then
confi rm by pressing the "OK"
button.



"AUDIO FUNCTIONS" MENU

With the Peugeot Connect Sound (RD5) switched on, once this menu
has been selected you can activate or deactivate the functions linked
with use of the radio (RDS, REG, RadioText) or the CD (introscan,
shuffl e, CD repeat).
For more information on the "Audio functions" application, refer to the
Peugeot Connect Sound (RD5) section.


"DIAGNOSIS VEHICLE" MENU

Once this menu has been selected, you can consult information
concerning the status of the vehicle.

Alert log

This summarises the active warning messages, displaying them in
succession on the multifunction screen.

)
On the " Diagnosis vehicle
" menu, select the following application:



)
Press the "MENU"
button to gain access to the main menu.

)
Press the arrows, then the "OK"
button to select the " Diagnosis
vehicle
" menu.

44

"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:


- defi ne the vehicle parameters,

- display confi guration,

- choice of language.


Define the vehicle parameters

Once this menu has been selected, you can activate or deactivate the
following equipment:


- selective unlocking (refer to the "Access" section),

- guide-me-home and welcome lighting (refer to the "Visibility" and
"Ease of use and comfort" sections),

- interior mood lighting (refer to the "Ease of use and comfort" section),

- daytime running lamps (refer to the "Visibility" section),

- rear parking sensors (refer to the "Driving" section).
)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
"Guide-me-home headlamps" line.

)
Press the " 
" or " 
" buttons to set the value required (15, 30 or
60 seconds), then press the "OK"
button to confi rm.

)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
"OK"
box and confi rm or press the "Back"
button to cancel.
Example: setting of the duration of the guide-me-home lighting


)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
menu required.

1/
INSTRUMENTS and CONTROLS
With the Peugeot Connect Sound (RD5) switched on, once this menu
has been selected you can confi gure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, services...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "Telephone" application, refer to the
Peugeot Connect Sound (RD5) section.

"TELEPHONE" MENU


*
According to country.


Display configuration

Once this menu has been selected, you have access to the following
settings:


- brightness-video setting,

- date and time setting,

- choice of units.



Choice of language

Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-Brasil, Türkçe * ).

For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.

46
RETRACTABLE COLOUR SCREEN (WITH
PEUGE
OT CONNECT NAVIGATION (RT6))

DISPLAYS IN THE SCREEN

Displays according to context:


- time,

- date,

- altitude,

- ambient temperature (the value displayed fl ashes if there is a risk of
ice),

- parking sensor information,

- audio functions,

- telephone and contacts information,

- satellite navigation system information,

- alert messages,

- menus for settings of the screen, navigation system and vehicle
equipment.
From the navigation system control panel, to select one of the
applications:


)
press the dedicated "RADIO"
, "MUSIC"
, "NAV"
, "TRAFFIC"
,
"PHONE"
or "SETUP"
button for access to the corresponding
menu,

)
turn dial A
to select a function, an item in a list,

)
press button B
to confi rm the selection,
or

)
press the "Back"
button to abandon the current operation and
return to the previous display.
For more information on these applications, refer to the "Audio
equipment and telematics" section.

CONTROLS