5
107
VISIBILITY
   
 
 
 
 
 
 
 
 
Special position of the 
windscreen wipers     
 
 
 
 
 
 
 
 
 
 
Automatic rain sensitive 
windscreen wipers 
  The windscreen wipers operate automati-
cally, without any action on the part of the 
driver, if rain is detected (sensor behind 
the rear view mirror), adapting their speed 
to the intensity of the rainfall. 
   
Activation 
  This is controlled manually by the driver 
by pushing the stalk downwards to the 
  "AUTO" 
 position. 
  It is accompanied by a message in the 
screen.    This position permits release of the 
windscreen wiper blades. 
  It is used for cleaning or replacement 
of the blades. It can also be useful, in 
winter, to detach the blades from the 
windscreen. 
  Do not cover the rain sensor, linked 
with the sunshine sensor and locat-
ed in the centre of the windscreen 
behind the rear view mirror. 
  Switch off the automatic rain sensitive 
wipers when using an automatic car 
wash. 
  In winter, to avoid damaging the 
wiper blades, it is advisable to wait 
until the windscreen is completely 
clear of ice before activating the 
automatic rain sensitive wipers.  
    The automatic rain sensitive wip-
ers must be reactivated if the igni-
tion has been off for more than one 
minute, by pushing the stalk down-
wards.  
   
Switching off 
  This is controlled manually by the driver 
by moving the stalk upwards then re-
turning it to position  "0" 
. 
  It is accompanied by a message in the 
screen.    
Operating fault 
  If an automatic wiping malfunction oc-
curs, the wipers will operate in intermittent 
mode. 
  Have it checked by a PEUGEOT dealer 
or a qualifi ed workshop. 
   
To maintain the effectiveness of the 
"fl at-blade" type of wiper blades, it 
is advisable to: 
   
 
-   handle them with care, 
   
-   clean them regularly using 
soapy water, 
   
-   avoid using them to retain 
cardboard on the windscreen, 
   
-   replace them at the fi rst signs of 
wear.  
 
     
 
 
 ) 
  Any action on the wiper stalk in the 
minute after switching off the ignition 
places the blades vertically on the 
screen. 
   
 ) 
  To park the blades again, switch on 
the ignition and operate the wiper 
stalk.