2011 VOLKSWAGEN TOUAREG warning lights

[x] Cancel search: warning lights

Page 120 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
  WARNING 
Daytime running lights and parking lights are not bright enough to let you see ahead or be seen by others when it is dark. 
�x Always switch on the low beam headlights at dusk or when it

Page 122 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
Adaptive Front Lighting System (AFS) 
The Adaptive Front Lighting System works only with the low beams switched on and only at speeds about 6 mph (10 km/h). The swivel-mounted lamps automatically im

Page 125 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
“Leaving 
home”  Action  
– Switch on the ignition.  
 
Background lighting in the outside mirrors 
The background lighting in the outside mirrors lights up the area close to the doors while y

Page 126 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
  WARNING 
Headlights that are aimed too high because of the way the vehicle is loaded can blind and distract other drivers. This can lead to a crash and serious personal injuries. 
�x Always adjust

Page 132 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
Lights 
up  
Possible cause   Proper response  
�F   Rain sensor malfunction.  
Switch ignition off and on again. 
If the indicator light comes on 
again and stays on, contact an 
authorized Volkswa

Page 165 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
Electrical load   Maximum power  
Turn signals per side   54 watts  
Side marker lights total   100 watts  
Taillights total   54 watts  
 
  WARNING 
�x An improperly installed or incorrect trailer

Page 166 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
The trailer is connected to the anti-theft alarm (if equipped): 
�x When the vehicle has a factory installed anti-theft alarm and a factory installed trailer hitch. 
�x When the trailer is not equip

Page 170 of 684

VOLKSWAGEN TOUAREG 2011  Owners Manual  
Ball mount dimensions 
�x The drop height (A) from the center of the ball to the center of the hole for the securing pin on the ball mount must be at least 11 /4 inches (32.3 mm) and at most 27 /8 i
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 56 next >