Downloaded from www.Manualslib.com manuals search engine Display
Fig. 175 In the instrument cluster display : examples of recognised speed limits or overtaking restrictions
w1th accompanying additional signs
c:cn First read and observe the introductory information and safety warnings b:. on page 243.
Traffic sign recognition texts
No traffic signs detected
Error: traffic sign recognition
Traffic sign recognition: clean the
windscreen!
Traffic sign recognition: currently re
stricted.
No data available
.A WARNING _
Failure to observe the text messages can
lead to your vehicle breaking down in traffic,
and can cause accidents and serious injuries.
• Never ignore any text messages.
Function
r-f'n First read and observe the introductory
~ information and safety warnings £on
page 243.
The traffic sig n recognition system is supported in
various countries
~page 243, Availability :. Please
remember this when travelling abroad .
244 While driving
Cause and solution
The system is in the initialisation phase.
OR: the camera has not detected any regulatory or
warning signs.
System fault.
Proceed to a qualified workshop and have the sys
tem checked .
The area
of the windscreen in the vicinity of the
camera is dirty.
Clean the windscreen .
No data transmission from the navigation unit.
Check if valid map data is loaded on the navigation
unit.
OR: the vehicle is located in an area that is not cov
ered by the map stored on the navigation unit. _
Traffic sign recognition is
not supported in the coun-
try in which you are currently travelling . _
-A WARNING (Continued) T'" -___.
• Stop the vehicle as soon as possible and
when safe to do so.
Failure to observe illuminated indicator lamps
~nd text messages can lead to your vehicle be· 4 mg damaged.
Display of traffic signs
Speed limit signs and no-overtaking signs w.ith ac·
~ompanying additional signs can be shoW~ m th~
lnst~ument cluster display ~Fig. 175 and 1
n ~~~e
fota1nment system ~page 31. Depending on
navigation system integrated into the vehicle . th~ · . . aVI· tra~lc s1gns may be also be displayed 1n the n '
gatlon system map display .
Downloaded from www.Manualslib.com manuals search engine 'Vhen traffic sign recognition is switched on, traffic
;igns in fron t of the vehicl~ are. regi~tered by a
:amera in the base of the mtenor m1rror. After in
spection a nd evaluation of the information from the
camera, the navigation system and the current ve
hicle data , up to 3 valid traffic signs ~Fig. 175 B
w ill be disp layed with the accompanying addit ional
s i
gns:
1st posit ion : the traffic sign that currently applies
for the driver is shown on the left-hand side
of the display. For example, a speed limit of
130 km/h ~Fig. 175 A.
2nd position : traffic signs that do not always apply
(e.g . 100 km/h "In wet" ) are shown in sec
ond place.
Additional sign: If the vehicle ra in sensor detects
rain while the vehicle is in motion , the traffic
sign with the addit ional
" In wet" sign that
now applies will be moved left to the first po
sition .
3rd position : an additional traffic sign that does not
always apply will be displayed in the third
position , e .g . overtaking temporarily
not per
mitted
~Fig. 175 C .
Town or village boundary signs trigger the display
of the standard speed limit for urban or country
roads in the relevant country. If the town or village
boundary signs have an add itional sign showing a
speed limit, this sign will appear in the display . S
ig ns ind icating the
end of a speed limit or over
taking restriction will not be displaye d .
There is no warning when you exceed the dis
played
speed limits . The legal regulations apply.
Switching the traffic sign display on and off
in the instrument cluster
The continuous display of traffic signs in the instru
ment cluster can be switched on and off using the
(ili) button and the G and (Driver assista nce) function
buttons .
Trailer mode
In vehicles with a factory-fitted towing bracket and
an electrical connection to the vehicle , the display
of traffic signs that may apply to the vehicle when
towing a trailer, e.g. applicable speed limits and
no-overtaking signs, can be switched on or off us
ing the~ button and the G!) and (Driv er a ssist ance}
function buttons in the infotainment system
~page 31. <1
Driver assist systems I 245
