2011 TOYOTA YARIS HATCHBACK clock reset

4
OVERVIEW
Driver seat belt reminder\f
(alarm will sound if speed is over 1\f mph)
Front passenger seat belt reminder
\f
(alarm will sound if speed is over 1\f mph) Brake system warning
1,\f
1\ff indicator does not turn off within a few seconds of starting engine, there may
be a malfunction. Have vehicle inspected by your Toyota dealer.2For
\b2,
3For
Service indicator and reminder
Speedometer
Automatic Transmission shift position indicator (if equipped)
Odometer/Trip meter switch and trip meter reset button
Odometer and two trip meters
Fuel gauge
Clock
Clock reset button
Tachometer
Without tachometer
With tachometer
Charging system warning1,\f
For details, refer to “Indicators and warning lights,” Section \f\f, 2011
Owner’s Manual\b
11YarisLB.qxd:\b1\b\9\f37M2 \f/\b/10 6:0\b A\9M Page \b

14
FEATURES/OPERATIONS
Audio(ifequipped)
To scan tracks onadisc Push “SCAN\b” Pushagain tohold selection\b
Radio
Topreset stations Tuneinthe desired stationandhold down apreset
button (16)untilyouhear abeep\b Pushdesired presetbutton (16)to
select\b
To scan stations Push“SCAN\b” Pushandhold toscan preset stations\b Push
again tohold selection\b
CDplayer
Preset buttons functions inother
modes indicated abovenumber\b
ViewCDtext
Push toskip up
/down folder
Eject
CD
Push toturn
ON/OFF Push
toadjust
tone &balance
Mode
Seek
station/
CD track select
Station/CD
track scan
Byinserting amini plugofacommercially availablecomponent intothe
AUX port, youcanlisten tomusic fromaportable audiodevice through
the vehicle’s speakersystemwhileinAUX mode\b
AUX port (ifequipped)
Lu
Ope
Pow
Desig
posit
Do
Ope
Clock
Press andhold clock resetbutton foradjustment mode\bPressagain to
adjust minutes andhours, waiting 5seconds aftereach\b
Refer tothe Owner’s Manualforadjustment instructions\b
Clockresetbutton
Without tachometerWithtachometer
11YarisLB.qxd:\b1\b\9\f37M2 \f/\b/10 6:0\b AM Page 1\b

140
2-2. Instrument cluster
Gauges and meters
Vehicles with tachometer
The following gauges, meters and displays illuminate when the
engine switch is in the ON position. Tachometer
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Clock
Indicates the time.
Clock reset button
Adjusts the time. ( →Π. 229 )

142 2-2. Instrument cluster
Vehicles without tachometer
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and hold-
ing the button will reset the trip meter when the trip meter is being dis-
played.
Odometer/trip meter
Odometer:
Displays the total distance the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was
last reset. Trip meters A and B can be used to record and display differ-
ent distances independently.
Clock
Indicates the time.
Clock reset button
Adjusts the time. (→Π. 229)

229
3-5. Other interior features
3
Interior features
Clock
Vehicles with tachometerPress and hold the clock reset button to enter the adjust-
ment mode for the clock.
Press the clock reset button to adjust the hours.
After adjusting the hours, wait 5 seconds to allow the hours to be
automatically input.
Press the clock reset button to adjust the minutes.
After adjusting the minutes, wait 5 seconds to allow the minutes to
be automatically input and then return to normal mode.

230 3-5. Other interior features
nThe clock is displayed when
The engine switch is in the ON position.
n When disconnecting and reco nnecting battery terminals
The time display will automatically be set to 1:00.
n Adjusting to a full hour (vehicles without tachometer)
If you press the clock reset button, the minute values will be rounded to the
nearest hour. So, minute values from “:00” to “:29” are rounded down, and
values from “:30” to “:59” are rounded up.*
*: e.g.
1:00 to 1:29 → 1:00
1:30 to 1:59 → 2:00
Vehicles without tachometer
Press and hold the clock reset button to enter the adjust-
ment mode for the clock.
Press the clock reset button to adjust the minutes.
After adjusting the minutes, wait 5 seconds to allow the minutes to
be automatically input.
Press the clock reset button to adjust the hours.
After adjusting the hours, wait 5 seconds to allow the hours to be
automatically input and then return to normal mode.