2011 TOYOTA YARIS HATCHBACK instrument cluster

1
OVERVIEW
FEATURES/OPERATIONS
SAFETYANDEMERGENCY FEATURES
Enginemaintenance 7Fueltank door release andcap 6Hoodrelease 7Indicatorsymbols 45Instrumentcluster 4
Instrumentpanel \f3
Keyle
ss entry* 6
AirConditioning/Heating 13Audio 14AutomaticTransmission 8Clock 14Cruisecontrol 13DoorBack 15LightcontrolInstrument panel 9Lights&turn signals 9Luggagestoragebox 15Parkingbrake 8Poweroutlet 15SeatadjustmentsFront 10SeatadjustmentsRear 10SeatFoldingrearseat 11SeatsHeadrestraints 10Tiltsteering wheel 8WindowsPower 1\f
Windshield wipers&washers 1\f
Childcomfort guide 17DoorlocksPower 16Seatbelts 16Sparetire&tools 17
Tire P
ressure Monitoring (warning)System 16
OVERVIEW
FEATURES/OPERATIONS
SAFETYAND
EMERGENCY FEATURES
INDEX
*Visit yourToyota dealerforinformation oncustomizing thisfeature.
e
,
11YarisLB.qxd:\b1\b\9\f37M2 \f/\b/10 6:0\b AM Page 1

140
2-2. Instrument cluster
Gauges and meters
Vehicles with tachometer
The following gauges, meters and displays illuminate when the
engine switch is in the ON position. Tachometer
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Clock
Indicates the time.
Clock reset button
Adjusts the time. ( →Π. 229 )

141
2-2. Instrument cluster
2
When driving
Odometer/trip meter
Odometer:
Displays the total distance the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was
last reset. Trip meters A and B can be used to record and display differ-
ent distances independently.
Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and hold-
ing the button will reset the trip meter when the trip meter is being dis-
played.

142 2-2. Instrument cluster
Vehicles without tachometer
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and hold-
ing the button will reset the trip meter when the trip meter is being dis-
played.
Odometer/trip meter
Odometer:
Displays the total distance the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was
last reset. Trip meters A and B can be used to record and display differ-
ent distances independently.
Clock
Indicates the time.
Clock reset button
Adjusts the time. (→Π. 229)

143
2-2. Instrument cluster
2
When driving
Odometer and trip meter display button
Pressing this button switches between odometer and trip meter dis-
plays.
Vehicles with tachometer Odometer
Trip meter A
*
Trip meter B*
*:Pushing and holding the buttonwill reset the trip meter.

144 2-2. Instrument cluster
Vehicles without tachometerOdometer
Trip meter A*
Trip meter B*
*:Pushing and holding the buttonwill reset the trip meter.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted.
Brighter
Darker
With the dial turned fully up, the
intensity of the instrument panel
lights will not be reduced even
when the tail lights/headlights are
turned on.

145
2-2. Instrument cluster
2
When driving
NOTICE
n
To prevent damage to the engine and its components
lDo not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
l The engine may be overheating if the high engine coolant temperature
warning light comes on. In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
→P. 349)

146
2-2. Instrument cluster
Indicators and warning lights
The indicator and warning lights on the instrument cluster and cen-
ter panel inform the driver of the status of the vehicle’s various sys-
tems.
Instrument cluster (vehicles with tachometer)
Instrument cluster (vehicl es without tachometer)