1
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
INDEX
1 Visit your Scion dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and
more information.
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND
EMERGENCY FEATURES
Engine maintenance 7Fuel tank door release and cap 7Hood release 6Indicator symbols 4-5Instrument cluster 4Instrument panel 2-3Keyless entry16
Light control-Instrument panel 6
Air Conditioning/Heating 12Auto lock functions28Automatic Transmission 8Bottle holders 13Cruise control 11Lights & turn signals 10Multi-information display 14Parking brake 8Power outlet 14Seat adjustments-Front 9Seat-Folding down rear seat 9Seats-Head restraints 9Steering wheel switches 13Tilt steering wheel 12USB/AUX audio jack 13Windows 11
Windshield wipers & washers 10
Door locks 15Doors-Child safety locks 15Seat belts 16Seat belts-Shoulder belt anchor 15Spare tire & tools 17
Tire Pressure Monitoring (warning) System 16
15
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
SAFETY AND EMERGENCY FEATURES
Doors-Child safety locks
Moving the lever to “LOCK” will allow the door to be opened only from
the outside.
Rear door
Door locks
Unlock
Lock
Seat belts-Shoulder belt anchor
Push up to raisePull lock release to lower
16
SAFETY AND EMERGENCY FEATURES
If belt is fully extended, then retracted even slightly, it cannot be
re-extended beyond that point, unless fully retracted again. This feature
is used to help hold child restraint systems securely.
To find more information about seat belts, and how to install a child
restraint system, refer to the Owner’s Manual.
Keep as low on
hips as possible
Take up slack
Too high
Seat belts
If tire pressure indicator is on, check/adjust each tire.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to “ON” and press and hold the
“ SET” button until indicator blinks three times. Let the vehicle sit for a
few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manualfor tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.
