2011 TOYOTA AYGO wheel bolt torque

IN CASE OF AN EMERGENCY233
—Lowering your vehicle
MS41018b
9. Lower the vehicle completely and
tighten the wheel bolts.
Turn the jack handle counterclockwise to
lower the vehicle.
Use only the wheel bolt wrench and turn
it clockwise to tighten the bolts. Do not
use other tools or any additional leverage
other than your hands, such as a hammer,
pipe or your foot. Make sure the wrench
is securely engaged over the bolt.
Tighten each bolt a little at a time in the
order shown. Repeat the process until all
the bolts are tight.
CAUTION
DWhen lowering the vehicle, make
sure that all portions of your body
and all other persons around will
not be injured as the vehicle is low-
ered to the ground.
DHave the wheel bolts tightened with
torque wrench to 103 N·m (10.5
kgf·m, 76 ft·lbf), as soon as pos-
sible after changing wheels. Other-
wise, the bolts may loosen and the
wheels may fall off, which could
cause a serious accident.
DTightening the bolts too much could
cause wheel deformation or cracks,
and may result in serious accidents.
DDo not attach a heavily damaged
plastic wheel ornament. It may fly
off the wheel and cause accidents
while the vehicle is moving.
AYGO WE 99E37E11 02.18

IN CASE OF AN EMERGENCY235
—After changing wheels
11. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specifica-
tions designated on page 299 in Section
8. If the pressure is lower, drive slowly to
the nearest service station and fill to the
correct pressure.
Do not forget to reinstall the tire valve
cap as dirt and moisture could get into
the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat
tire securely.
As soon as possible after changing
wheels, tighten the wheel bolts to the
torque specified on page 299 in Section
8 with a torque wrench. Have a technician
repair the flat tire and replace the spare
tire with it.
CAUTION
Before driving, make sure all the
tools, jack and flat tire are securely
placed in their storage locations to
reduce the possibility of death or se-
rious injury during sudden braking,
sudden swerving or an accident.
PS41515
Aluminium wheels:
Before stowing the flat tire, remove the
center wheel ornament by pushing from
the reverse side.
Be careful not to lose the wheel ornament.
AYGO WE 99E37E11 02.18

SPECIFICATIONS299
Tires
Tire size and cold tire inflation pressure:
For driving at 160 km/h (100 mph) or over
kPa (kgf/cm
2or bar, psi)
Tire size
For driving under 160 km/h
(100 mph)For driving at 160 km/h
(100 mph) or over
Tiresize
FrontRearFrontRear
155/65R14 75T220 (2.2, 32)220 (2.2, 32)230 (2.3, 34)230 (2.3, 34)
Wheel bolts torque, N·m (kgf·m, ft·lbf):
103 (10.5, 76)
NOTE: For complete information on tires (e.g. replacing tires or replacing wheels), see
“Checking tire inflation pressure” through “Aluminum wheel precautions”, pages
269 through 275, in Section 7−2.
AYGO WE 99E37E11 02.18