2011 TOYOTA AURIS low beam

UK_AURIS_HV_EE
6Front position lights
P. 204
Headlights (low beam)

P. 204
Headlights (high beam) P. 204
Pictorial indexExterior
Front fog lights P. 209
Turn signal lights P. 188
Hood P. 369
Windshield wipers P. 210
Moon roof  P. 99
Outside rear view
mirrors
P. 93
Turn signal lights P. 188
Daytime running lights P. 206

265 3-2. Using the audio system
3
Interior features
UK_AURIS_HV_EE
CAUTION
Certification for the CD player
This product is a class I laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personnel.
Laser power: No hazardous
NOTICE
CDs and adapters that cannot be used
Do not use the following types of CDs or 8 cm (3 in.) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
CDs that have a diameter that is not 12
cm (4.7 in.)
Low-quality and deformed CDs

405 4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EE
13 TURN & HAZ 10 A Turn signal lights
14 ETCS 10 AMultiport fuel injection system/
sequential multiport fuel injection
15ABS MAIN
NO.120 A Brake system
16 P/I 2 40 AHorn, left-hand headlight (low
beam), right-hand headlight (low
beam), back-up lights, navigation
system, auto anti-glare inside rear
view mirror, Toyota parking assist-
sensor
17 ABS MTR 1 30 A Brake system
18 ABS MTR 2 30 A Brake system
19 H-LP HI MAIN 20 A H-LP LH HI, H-LP RH HI
20 P CON MTR 30 A P position control system
21 P/I 1 60 A EFI MAIN, BATT FAN, IG2
22 EPS 60 A Electric power steering
23 PCU 10 A Hybrid system
24 IGCT NO.2 10 AHybrid system, P position control
system, hybrid battery
25 MIR HTR 10 AOutside rear view mirror defoggers,
outside rear view mirrors
26 RAD NO.1 15 A Audio system, navigation system
27 DOME 10 AInterior light, personal lights, vanity
lights, smart entry & start system,
luggage compartment light
28 ECU-B 10 AGauge and meters, vehicle stability
control system, main body ECU
29 H-LP LH HI 10 A Left-hand headlight (high beam)
30 H-LP RH HI 10 A Right-hand headlight (high beam)
FuseAmpereCircuit

408 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EE
10 GAUGE 10 AHorn, left-hand headlight (low
beam), right-hand headlight (low
beam), back-up lights, navigation
system, auto anti-glare inside rear
view mirror, Toyota parking assist-
sensor
11 ECU-IG NO.2 10 AAir conditioning system, turn signal
lights, auto anti-glare inside rear
view mirror, rear view monitor sys-
tem, moon roof, Toyota parking
assist-sensor, brake system
12 ECU-IG1 NO.1 10 AMain body ECU, electric cooling
fans, automatic headlight leveling
system, electric power steering,
rain-sensing windshield wipers,
headlight cleaner, vehicle stability
control system
13 DOOR RL 20 A Power windows
14 DOOR RR 20 A Power windows
15 D FR DOOR 20 A Power windows
16 S/ROOF 20 A Moon roof
17 P FR DOOR 20 A Power windows
18 STOP 10 AStop lights, high mounted stop
light, brake system, hybrid system
19 RR FOG 7.5 A Rear fog light
20 OBD 7.5 A On-board diagnosis system
21 FR FOG 15 A Front fog lights
22 DBL LOCK 25 AMultiport fuel injection system/
sequential multiport fuel injection
23 DOOR NO.1 25 A Power door lock
24 SEAT HTR FL 10 A Seat heater
25 SEAT HTR FR 10 A Seat heater
FuseAmpereCircuit

411
4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EE
Light bulbs
You may replace the following bulbs yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact any authorized
Toyota dealer or repairer, or another duly qualified and equipped
professional.
For more information about replacing other light bulbs, contact any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. (P. 501)
Front bulb locations
Headlight low beam
(halogen bulb)
Front position light
Front fog light
Headlight
high beam
Front turn signal light

412 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EE
Replacing light bulbs
Headlight low beams (halogen bulbs)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
Rear bulb locations
Rear fog light Back-up light
Stop light
Tail light
License plate light
Rear turn signal light
STEP1
STEP2

418 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EELicense plate lights
Remove the cover.
To prevent damaging the vehicle,
wrap the flathead screwdriver
with a tape.
Remove the light bulb.
Lights other than the above
If any of the lights listed below has burnt out, have it replaced by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
Headlight low beams (discharge bulb)
Side turn signal lights
High mounted stoplight
Daytime running lights
STEP1
STEP2

420 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EE
CAUTION
Replacing light bulbs
Turn off the lights. Do not attempt to replace the bulb immediately after
turning off the lights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failing to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
Discharge headlights (if equipped)
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional, before replacing discharge headlights (includ-
ing light bulbs).
Do not touch the high-intensity discharge headlight’s high voltage socket
when the headlights are turned on.
An extremely high voltage of 20000 V will be discharged and could result
in serious injury or death by electric shock.
Do not attempt to take apart or repair the low beam discharge headlight
bulbs, connectors, power supply circuits, or related components.
Doing so could result in electric shock and serious injury or death.
To prevent damage or fire
Make sure bulbs are fully seated and locked.