2011 TOYOTA AURIS HYBRID recommended oil

393 4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EE
CAUTION
When replacing wheels
Do not use wheels that are a different size from those recommended in the
Owner’s Manual, as this may result in loss of handling control.
Never use an inner tube in a leaking wheel which is designed for a tube-
less tire. Doing so may result in an accident, causing serious injury or
death.
When installing the wheel nuts
Never use oil or grease on the wheel bolts or wheel nuts.
Oil and grease may cause the wheel nuts to be excessively tightened,
leading to bolt or disc wheel damage. In addition, the oil or grease can
cause the wheel nuts to loosen and the wheel may fall off, causing an acci-
dent and resulting in death or serious injury. Remove any oil or grease
from the wheel bolts or wheel nuts.
Be sure to install the wheel nuts with
the tapered end facing inward. Install-
ing the nuts with the tapered end facing
outward can cause wheel to break and
eventually cause a wheel to come off
while driving, which could lead to an
accident resulting in death or serious
injury.
Ta p e r e d
portion

496 6-1. Specifications
UK_AURIS_HV_EEEngine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota
recommends the use of approved “Toyota Genuine Motor Oil”.
Another motor oil of matching quality can also be used.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or
ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL or SM multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your
Toyota vehicle at manufactur-
ing, and the best choice for good
fuel economy and good starting
in cold weather.
If SAE 0W-20 oil is not available,
SAE 5W-30 oil may be used.
However, it should be replaced
with SAE 0W-20 at the next oil
change.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures, the
engine may become difficult to
start, so SAE 5W-30 or lower vis-
cosity engine oil is recom-
mended.
Temperature range anticipated before
next oil change.
Preferred

524
UK_AURIS_HV_EE
GAS STATION INFORMATION
Auxiliary catch lever
P. 369Fuel filler door
P. 104
Hood lock release lever
P. 3 6 9
Fuel filler door opener
P. 1 0 4Tire inflation pressure
P. 501
Fuel tank capacity
(Reference)45 L (11.9 gal., 9.9 Imp. gal.)
Fuel typeP. 105, 494
Cold tire inflation
pressureP. 5 0 1
Engine oil capacity
(Drain and refill
reference)
L (qt., Imp. qt.)
With filter 4.2 (4.4, 3.7)
Without filter 3.9 (4.1, 3.4)
Engine oil type
“Toyota Genuine Motor Oil” or equivalent
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM
“Energy-Conserving” or ILSAC multigrade
engine oil
15W-40 and 20W-50:
API grade SL or SM multigrade engine oil
Recommended oil viscosity: 0W-20
P. 4 9 6