Fuses and light bulbs161
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Removing the headlightThe headlight must be removed in order to change the light bulb of the parking
lights, low beam lights and main beam ligh ts as well as the turn signal lights.Removing the headlight– Switch the ignition and all lights off.
–Open the bonnet page 130.
– Unscrew the plastic nut fig. 147 .
– Pull the fuse in upward direction.
– Pull the locking lever of the headlight as far as the stop in the direction of arrow .
– Unplug the plug connector and carefully take out the headlight in the direction
of arrow .
Installation takes place in the reverse order.
Note
After installing the headlight, the headlight setting must be checked by a specialist
garage.
Parking light at the frontFig. 148 Replacing the cover for the lamps of th e parking- and low-beam light / removing the
bulb for the parking lightChange the light bulb for the parking light– Switch the ignition and all lights off.
– Remove the headlight page 161.
– Press the wire clamps in the direction of arrow to the side and remove the cover fig. 148 - left.
– Press the contact studs in the direction of arrow and remove the holder with the light bulb of the parking light fig. 148 - right.
– Take the faulty bulb out of the fixture and insert a new one.
Installation takes plac e in the reverse order.
Note
After installing the headlight, the headlight setting must be checked by a specialist
garage.
Fig. 147 Removing the headlight
A
B
1
2
s2lk.2.book Page 161 Monday, April 18, 2011 7:41 AM