13B-9
MR-372-J84-13B050$117.mif
V17
13B
DIESEL INJECTION
Fault finding – List and location of components
High pressure pump:
The high pressure pump is located upstream of the common rail.
Rail pressure sensor:
The sensor is fitted to the common rail.
Rail pressure regulator:
The regulator is fitted on the high pressure pump.
Fuel flow regulator:
The regulator is fitted on the high pressure pump.
Piezoelectric injectors:
The injectors are fitted on the cylinder head after the common rail.
Vacuum pump:
The vacuum pump is fitted at the end of the camshaft.
Control solenoid valve:
The solenoid valve is located on the turbocharger.
Turbocharger:
The turbocharger is located after the exhaust manifold.
Intake air pressure sensor:
The sensor is integrated into the injection computer.
Turbocharger pressure sensor:
The turbocharger pressure sensor is located on the air circuit between the turbocharger and the damper valve.
Air mass flow meter:
The air mass flow meter is located at the air circuit inlet and integrates the air temperature sensor.
EGR valve:
The EGR valve is located between the inlet manifold and the exhaust manifold.
EGR position sensor:
The sensor is integrated into the EGR valve.
Damper valve:
The damper valve is located before the inlet manifold (Vdiag 44, 45, 48, 49 and 4D only).
Particle filter:
The filter is located on the exhaust pipe after the catalytic converter.
TDC sensor:
The sensor is located on the flywheel.
Camshaft sensor:
The sensor is located at the end of the camshaft.
Electric coolant pump:
The electric coolant pump is located between the heating elements and the turbocharger (only on vehicles equipped
with a particle filter).
Refrigerant pressure sensor:
The sensor is located on the coolant circuit.
MR-372-J84-13B050$117.mif
Siemens Injection
SID301 and 304
Vdiag No.: 44-45-48-49-4D-4C
Program No.: B1 and B2
13B-10
MR-372-J84-13B050$117.mif
V17
Siemens Injection
SID301 and 304
Vdiag No.: 44-45-48-49-4D-4C
Program No.: B1 and B2DIESEL INJECTION
Fault finding – List and location of components13B
Heating elements:
The heating elements are located in the cooling circuit before the additional coolant pump which cools the
turbocharger (Vdiag 45, 49 and 4D only).
Coolant temperature sensor:
The sensor is located on the cylinder head near the engine water chamber.
Air temperature sensor:
The air temperature sensor is located at the air circuit inlet, integrated into the air flowmeter.
Turbocharging pressure sensor solenoid valve:
The solenoid valve is located on the turbocharger.
Catalytic converter:
The catalytic converter is located upstream of the exhaust system and downstream of the turbocharger.
Fuel temperature sensor:
The sensor is located near the injection pump and injector return.
Catalytic converter downstream temperature sensor:
The sensor is located after the catalytic converter.
Turbine upstream temperature sensor:
This sensor is located between the exhaust pipe and the turbocharger.
Cruise control/speed limiter on/off switch:
This switch is located in the passenger compartment to the left of the steering wheel near the lighting dimmer.
Water in diesel fuel sensor (optional):
This sensor is located in the diesel filter.
Fan unit relay:
The relay is located on the cooling radiator.
Accelerator potentiometer:
The potentiometer is located on the accelerator pedal.
Brake pedal switch:
The switch is located on the brake pedal.
Clutch pedal switch:
The switch is located on the clutch pedal.
Heater plugs:
The heater plugs are located on the cylinder head.
Particle filter injector:
The injector is located between the particle filter injector fuel pump and the exhaust pipe. (Vdiag 45, 49 and 4D only)
Electric fuel pump:
The pump is located between the tank and the particle filter injector fuel filter. (Vdiag 45, 49 and 4D only)
