88C-2
MR-372-J84-88C100$059.mif
V5
88C
AIRBAGS AND PRETENSIONERS
Fault finding – Introduction
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding procedure applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedures (this document):
– Assisted fault finding (integrated into the diagnostic tool), Dialogys.
Wiring Diagrams:
– Visu-Schéma (CD-ROM), paper.
Diagnostic tool type
–CLIP
Special tooling requiredVehicle(s): MEGANE II / SCENIC
Function concerned: AIRBAGComputer name: Autoliv RC5 P1/P2
Vdiag No.: 14
Special tooling required
Multimeter.
– Set of adapters and borniers for using the airbag and
pretensioner wiring harness check function on CLIP and XRBAG
tools for updates comprising the borniers listed below.
Modifying the series of new airbag ignition module connectors
entails modifying the dummy ignition module.
LOCAL MODIFICATION OF THE DUMMY IGNITION MODULE
Remove the ignition module from its red mounting and remove
one of the two brown locking notches.
Elé. 1685 Computer bornier 22 tracks
Elé. 1717 64-track computer bornier
Elé. 1617 Blue 8-trackSeat wiring harness test adapter
Elé. 1617 Rotary switch bornier 10 tracks
Adapter 2 tracks B36
ABGRC5_V14_PRELI
AIRBAG RC5
Vdiag: 14
