AIRBAG - SEAT BELT PRETENSIONERS
Fault finding - States and parameter summary table88C
88C - 66V3 MR-372-J84-88C000$080.mif
AIRBAG ACU4
Vdiag: 04
AIRBAG - SEAT BELT PRETENSIONERS
Fault finding - States and parameter summary table
ACU4 AIRBAG STATES SUMMARY TABLE:
ACU4 AIRBAG PARAMETERS SUMMARY TABLE:
The trigger line or sensor impedance is 99.9Ω when the component is disconnected or not controlled by the
computer.STATES
TOOLDIAGNOSTIC TOOL HEADINGS
ET010
ET072
ET073
ET074
ET076
ET103
ET105
ET108
ET143
ET144Impact detected
Passenger airbag status indicator light commanded
Computer locked by tool
Fault warning light commanded
Computer to replace
Type of passenger airbag lock
Locked diagnostics power supply out of limits
Passenger airbag lock mode
Passenger airbag(s) locked
Fault present or in memory
PARAMETERS
TOOLDIAGNOSTIC TOOL HEADINGS
PR001
PR002
PR104
PR105
PR106
PR107
PR108
PR109
PR110
PR111
PR112
PR113
PR114
PR115
PR116
PR117
PR118
PR140
PR147Computer supply voltage
Vehicle type
Driver's seat sensor impedance
Line 1 impedance (Driver's seat / lap airbag circuit).
Line 2 impedance (Passenger's seat / lap airbag circuit).
Line 3 impedance (Passenger's front airbag circuit 1).
Line 4 impedance (Passenger's front airbag circuit 2).
Line 5 impedance (Driver's front airbag circuit 1).
Line 6 impedance (Driver's front airbag circuit 2).
Line 7 impedance (Driver's side curtain side airbag circuit).
Line 8 impedance (Passenger's side curtain side airbag circuit).
Line 9 impedance (Driver's front frontal side airbag circuit).
Line 10 impedance (Passenger's front frontal side airbag circuit).
Line 11 impedance (Driver's rear frontal side airbag circuit).
Line 12 impedance (Passenger's rear frontal side airbag circuit).
Line 13 impedance (Front belt pretensioners circuit).
Line 14 impedance (Rear retractors).
Number of memory zone deletions
Airbag lock circuit impedance
ACU4 Vdiag04 J84 1.0
MR-372-J84-88C000$080.mif
AIRBAG - SEAT BELT PRETENSIONERS
Fault finding - Conformity check
88C - 67
88C
V3 MR-372-J84-88C000$090.mif
AIRBAG ACU4
Vdiag: 04
AIRBAG - SEAT BELT PRETENSIONERS
Fault finding - Conformity check
NOTESOnly carry out conformity check after a full check using the diagnostic tool.
Order FunctionParameter or State
Check or Action Display
and notesFault finding
1Diagnostic tool
dialogue- CHART 1Airbag ACU 4
2Computer
conformityParameter PR002 "Vehicle
type"DF001 MEGANE II:48
3Computer
configurationUsing "READ
CONFIGURATION" commandsEnsure that the computer
configuration defined in the
"Current" column
corresponds to the vehicle
equipment.None
4Warning light
operation
Computer
initialisation
check.Ignition switched onWarning light comes on for
3 seconds when the ignition
is switched onNone
ACU4 Vdiag04 J84 1.0
MR-372-J84-88C000$090.mif
