2011 PORSCHE BOXSTER S fuel consumption

74
75
If we are to continue to enjoy driving
pleasure, we need to look after our
environment. In other words, we need to
take responsibilit y. In an era of intensify -
ing debate about global climate change
and CO
2 emissions, every automotive
manufacturer is asking itself what it
has to offer in terms of environmental
protection. Our answer has long been
the same: Intelligent Performance –
a combination of high power output and
high efficiency.
In recent years Porsche has managed to
reduce fuel consumption across all model
ranges by a double - digit percentage compared with the respective previous
model, even though performance has
been increased in every generation.

This is made possible by an efficient drive
concept (e.g. direct fuel injection (DFI) and
VarioCam Plus), lightweight construction,
optimised aerodynamics and low rolling
resistance.
The environmental management team
at the Porsche Development Centre in
Weissach aims to demonstrate a high
level of environmental responsibility. Here,
technological developments are carried
out with environmental protection in mind.
The goal is to enhance performance –
You can live for the moment
and still care about tomorrow.
Environment.
but, where possible, not at the expense
of the environment. We achieve this
goal with Intelligent Per formance, as
epitomised by the Boxster.
Exhaust emission control.
Vehicles manufactured by Porsche
demonstrate that even high-performance
sports cars can achieve moderate fuel
consumption and exhaust emission values
in their respective category.
This is achieved, on the one hand, through
the use of fuel - ef ficient technologies such
as auto start /stop, thermal management,
electrical system recuperation, direct fuel
For fuel consumption and CO
2 emissions please refer to page 127. injection, VarioCam Plus and, in conjunc
-
tion with optional PDK, coasting mode.
On the other hand, newly developed
cataly tic converters provide ef ficient
emission control. While the stereo
Lambda control circuitr y controls and
monitors each cylinder bank separately.
For each exhaust tract, oxygen sensors,
together with the engine electronics
and injectors, regulate the composition
of the exhaust gas, while another
Lambda sensor on each cylinder bank
monitors pollutant conversion in the
respective cataly tic converter.

76
7776
77
The wider view |
Environment
Fuel economy and recycling.
Intelligent lightweight construction has
been fundamental to the Porsche identit y
since 1948 for both technical and ecolog -
ical reasons. This forms the basis for
achieving low fuel consumption values in
conjunction with outstanding perfor -
mance. On the technical side, various compo
-
nents are made with a high proportion of
aluminium, magnesium, plastics and
super- high -strength sheet steel. The
materials used have been selected for
their abilit y to withstand load, yet they
are considerably lighter than conventional
steel. As a result, the bodyshell of the
new Boxster models has a light alloy con -
tent of approximately 46 %. On the ecological side, all materials used
are meticulously selected. We use only
innovative and environmentally friendly
components. All synthetic components
are easily recyclable and each material

is labelled to facilitate its separation for
recycling. The reduction in the number
of plastic variants helps to ensure more
ef ficient recycling. Recycled plastics are
used where they meet our exacting technical requirements. In short, the new
Boxster is around 95
% recyclable.
In addition, Porsche uses a high propor -
tion of environmentally friendly water-
based paints. For us, environmental
protection does not begin at the end of
a vehicle’s life. It starts at the planning
and development stage.
Fuel.
Both Boxster models are designed to
operate on fuels with an ethanol content
of up to 10 %. Ethanol has a positive
impact on the CO
2 balance since the
plants grown for the production of this
biofuel also absorb CO
2 from the atmos -
phere. The release of hydrocarbons from the fuel system has been minimised
thanks to the active carbon filter and the
multilayered material from which the fuel
tank is made. All fuel lines are made from
multilayered plastic, steel or aluminium.
Servicing.
Long service intervals offer clear advan
-
tages. For you, they reduce costs and
save time. For the environment, they
assist in the sparing use of consumables
and replacement parts. For full details
of service intervals, please refer to the
separate price list.
For fuel consumption and CO
2 emissions please refer to page 127.

12 612 7
Boxster Boxster S
Engine
C y linders 6 6
Displacement 2.70 6 c m
33.436 cm3
Max. power (DIN)
at rpm195 kW (265 hp)
6.70 0 232 kW (315 hp)
6.70 0
Max. torque
at rpm 280 Nm
4.500 – 6.500 360 Nm
4.500–5.800
Compression ratio 12.5:1 12.5:1
Transmission
LayoutRear-wheel drive Rear-wheel drive
Manual gearbox 6-speed 6-speed
PDK (optional) 7-speed 7-speed
Chassis
Front axleLightweight spring-strut suspension Lightweight spring-strut suspension
Rear axle Lightweight spring-strut suspension Lightweight spring-strut suspension
Steering Variable steering ratio, power-assisted (electromechanical) Variable steering ratio, power-assisted (electromechanical)
Turning circle 10,9 8 m 10,9 8 m
Brakes Four-piston aluminium monobloc fixed calipers front and rear,
discs internally vented and cross-drilled Four-piston aluminium monobloc fixed calipers front and rear,

discs internally vented and cross-drilled
Vehicle stabilit y system Enhanced Porsche Stabilit y Management (PSM)
(with ABS 9.0) Enhanced Porsche Stabilit y Management (PSM)
(with ABS 9.0)
Anti - lock braking system A BS 9.0 A BS 9.0
Standard wheels Front: 8J x 18" ET 57, Rear: 9J x 18" ET 47 Front: 8J x 19" ET 57, Rear: 9,5J x 19" ET 45
Standard tyres Front: 235/45 ZR 18, Rear: 265/45 ZR 18 Front: 235/40 ZR 19, Rear: 265/40 ZR 19
Boxster Boxster S
Weights
Manual/PDK Manual/PDK
Unladen weight (DIN) 1.310 kg / 1.340 kg1.320 kg / 1.350 kg
Unladen weight (EC)
1)1.385 kg / 1.415 kg 1.395 k g / 1.425 k g
Pe r m issi b le gross we igh t 1.645 kg / 1.675 kg1.655 kg / 1.685 kg
PerformanceManual/PDKManual/PDK
Top speed 264 km/ h (164 mph) / 262 km/ h (162 mph)279 km/ h (173 mph) / 277 km/ h (172 mph)
0 –100 km/ h (0 – 62 mph) 5.8 secs / 5.7 secs5.1 secs / 5.0 secs
with Sport Chrono Package (in conjunction with PDK) – / 5.5 secs– / 4.8 secs
0 –160 km/ h (0 –99 mph) 13.1 secs / 13.0 secs 11.0 secs / 10.9 secs
with Sport Chrono Package (in conjunction with PDK) – / 12,7 secs– / 10,7 secs
Flexibilit y (80 –120 km/ h) (50 –75 mph) in 5th gear 8,2 secs / –6,7 secs / –
Overtaking acceleration (80 –120 km/ h) (50 –75 mph) – /3,7 secs– / 3,1 secs
Fuel consumption/emissions2)Manual/PDKManual/PDK
Urban in l/100 km (mpg) 11.4 (24.8) / 10.6 (26.6)12.2 (23.2) / 11.2 (25.2)
Extra urban in l/100 km (mpg) 6.3 (44.8) / 5.9 (47.9)6.9 (40.9) / 6.2 (45.6)
Combined in l/100 km (mpg) 8.2 (34.4) / 7.7 (3 6.7 ) 8.8 (32.1) / 8.0 (35.3)
CO
2 emissions g/km 192 / 18 0 20 6/ 18 8
Dimensions/aerodynamics
Length 4 . 374 m m4 . 374 m m
Width (including exterior mirrors) 1.801 mm (1.978 mm)1.801 mm (1.978 mm)
Height 1.282 m m1.281 m m
Wheelbase 2.475 mm2.475 mm
Luggage compartment volume (German Car Manufacturers’ Assoc.)
front / rear
150 litres / 130 litres150 litres / 130 litres
Tank capacity (refill volume) approx. 64 litresapprox. 64 litres
Drag coef ficient c
w = 0.30cw = 0.31
1) Weight is calculated in accordance with the relevant EC Directives and is valid for vehicles with standard specification only. Optional equipment increases this figure. The figure given includes 68 kg for the driver and 7 kg for luggage.2) Data determined in the NEDC (New European Driving Cycle) in accordance with the Euro 5 (715/2007/ EG, 692/2008/ EG, 566/2011/ EG und ECE- R 101) measurement method. The figures do not refer to an individual vehicle nor do they constitute part
of the of fer. They are intended solely as a means of comparing dif ferent t ypes of vehicle. You can obtain further information about individual vehicles from your Porsche Centre. Fuel consumption calculated for vehicles with standard specification only.
A vehicle‘s fuel consumption and CO
2 emissions depend not only on its ef ficient use of fuel, but also on driving st yle and other non -technical factors. Actual consumption and per formance may var y with items of optional equipment.
Technical data.
Technical data

The models featured in this publication
are approved for road use in Germany.
Some items of equipment are available
as extra-cost options only. The availabilit y
of models and options may vary from
market to market due to local restrictions
and regulations. For information on
standard and optional equipment, please
consult your Porsche Centre. All informa-
tion regarding construction, features,
design, performance, dimensions, weight,
fuel consumption and running costs is
correct to the best of our knowledge
at the time of going to print. Porsche
reserves the right to alter specifications,
equipment and delivery scopes without
prior notice. Colours may differ from
those illustrated. Errors and omissions
excepted.
© Dr. Ing. h.c. F. Porsche AG, 2012
All text, illustrations and other informa -
tion in this publication are subject to the
copyright of Dr. Ing. h.c. F. Porsche AG. Any reproduction, duplication or other

use is prohibited without the prior written
consent of Dr. Ing. h.c. F. Porsche AG.
Porsche, the Porsche Crest, 911, Carrera,
Boxster, Tequipment, PCCB, PCM, PDK,
PSM and other marks are registered
trademarks of Dr. Ing. h.c. F. Porsche AG.
Dr. Ing. h.c. F. Porsche AG supports the
use of paper from sustainable forests.
This catalogue is printed on paper
made from 100 % PEFC-certified pulp
(Programme for the Endorsement of
Forest Certification).
Dr. Ing. h.c. F. Porsche AG
Porscheplatz 1
70435 Stut tgart
Germany
www.porsche.com
E d i t i o n : 11 / 2 011
Printed in Germany
WS L B13010 0 0125 G B/ U K