2011 Peugeot RCZ air condition

3/
EASE OF USE AND COMFORT

4. Automatic visibility programme

The automatic comfort programme may not be suffi cient to
quickly demist or defrost the windscreen and side windows
(humidity, several passengers, ice, etc.).


)
In this case, select the automatic visibility programme.
The system automatically controls the air conditioning, the air fl ow and
the air intake and provides optimum distribution of the ventilation to the
windscreen and side windows.


)
To switch it off, press the "visibility"
button again or press the
"AUTO"
button, the indicator lamp on the button switches off and
the indicator lamp on the "AUTO"
button comes on.




MANUAL OPERATION

If you wish, you can make a different choice from that offered by the
system by changing a setting. The other functions will still be controlled
automatically.


)
Pressing the "AUTO"
button returns the system to completely
automatic operation.
For maximum cooling or heating of the passenger compartment,
it is possible to exceed the minimum value 14 or the maximum
value 28.


)
Turn control 2
or 3
to the left until "LO"
is displayed or to the
right until "HI"
is displayed.


5. Air conditioning On/Off



)
Press this button to switch off the air conditioning.
Switching the system off could result in discomfort (humidity,
condensation).


)
Press this button again to return to automatic operation of the air
conditioning. The indicator lamp on the "A/C"
button comes on.



6. Air distribution adjustment



)
Press one or more buttons to direct the air fl ow towards:


- the windscreen and side windows (demisting or defrosting),

- the windscreen, the side windows and the vents,

- the windscreen, the side windows, the vents and the footwells,

- the vents and the footwells,

- the vents,

- the footwells,

- the windscreen, the side windows and the footwells.




7. Air flow adjustment



)
Turn this control to the left to decrease the air fl ow or to
the right to increase the air fl ow.
The air fl ow indicator lamps, between the two fans, come on
progressively in relation to the value requested.

76
SWITCHING THE SYSTEM OFF



)
Turn the air fl ow control to the left until all of the indicator lamps
switch off.
This action switches off the air conditioning and the ventilation.
Temperature related comfort is no longer guaranteed but a slight fl ow of
air, due to the movement of the vehicle, can still be felt.


)
Turn the air fl ow dial to the right or press the "AUTO"
button to
reactivate the system with the values set before it was switched off.
Avoid prolonged operation in interior air recirculation mode or
driving for long periods with the system off (risk of condensation
and deterioration of the air quality).


8. Air intake/Air recirculation



)
Press this button for recirculation of the interior air. The
indicator lamp on the button comes on.
Air recirculation enables the passenger compartment to be isolated from
exterior odours and smoke.


)
As soon as possible, press this button again to permit the intake of
outside air and prevent the formation of condensation. The indicator
lamp on the button switches off.



9. Mono-zone/Dual-zone



)
Press this button to equalise the comfort value on the
passenger's side with that on the driver's side (mono
zone). The indicator lamp on the button comes on.











REAR SCREEN DEMIST - DEFROST


SWITCHING ON

The rear screen demisting/defrosting can only operate when the engine
is running.


)
Press this button to demist/defrost the rear screen and (depending
on version) the door mirrors. The indicator lamp associated with the
button comes on.



SWITCHING OFF

The demisting/defrosting switches off automatically to prevent an
excessive consumption of current.


)
It is possible to stop the demisting/defrosting operation before it
is switched off automatically by pressing the button again. The
indicator lamp associated with the button switches off.
If the engine is switched off before the demisting/defrosting is
switched off automatically, demisting/defrosting will resume next
time the engine is switched on.


)
Switch off the demisting/defrosting of the rear screen and door
mirrors as soon as appropriate as lower current consumption
results in reduced fuel consumption.
The control button is located on the heating or air conditioning
system control panel.

3/
EASE OF USE AND COMFORT








SUN VISOR

Component which protects against sunlight from the front or the side,
also equipped with an illuminated courtesy mirror.


)
With the ignition on, raise the concealing fl ap; the mirror is lit
automatically.
This sun visor is also equipped with a ticket holder.






ILLUMINATED AND COOLED
GLOVE BOX
This has areas for storing a bottle of water, the vehicle's handbook pack...
Its lid has areas for storing a pen, a pair of spectacles, tokens, cards,
a can...


)
To open the glove box, raise the handle.
The lamp comes on when the lid is opened.
The glove box is equipped with an air vent, which can be opened or
closed. This distributes the same conditioned air as the vents in the
passenger compartment.

5/
SAFETY
All repairs and changing of tyres on a wheel fi tted with this
system must be carried out by a PEUGEOT dealer or a qualifi ed
workshop.
If, when changing a tyre, you install a wheel which is not detected
by your vehicle (example: fi tting of snow tyres), you must have
the system reinitialised by a PEUGEOT dealer or a qualifi ed
workshop.
This system does not avoid the need to have the tyre pressures
checked regularly (refer to the "Identifi cation markings" section)
to ensure that the optimum dynamic performance of the vehicle is
maintained and prevent premature wear of the tyres, particularly in
arduous driving conditions (heavy load, high speed).
The tyre pressures must be checked cold, at least once a month.
Remember to also check the pressure of the spare wheel if your
vehicle has one.
The tyre under-infl ation detection system may experience
temporary interference due to electro-magnetic signals on a
frequency close to that used by the system.


Puncture

The STOP
warning lamp comes on and this warning lamp is
displayed in the instrument panel, accompanied by an audible
signal and an alert message identifying the wheel concerned.


)
Stop as soon as it is safe to do so, avoiding any sudden movement
of the steering wheel and the brakes.

)
Repair or change the damaged wheel (punctured or very defl ated
tyre), and have the tyre pressure checked as soon as possible.



Sensor(s) not detected or faulty

This warning lamp is displayed in the instrument panel
accompanied by an alert message to identify the wheel or
wheels which are not detected or to indicate a fault in the
system.
Contact a PEUGEOT dealer or a qualifi ed workshop to replace the
faulty sensor(s).
This message is also displayed when one of the wheels is away
from the vehicle (being repaired) or when one or more wheels
without a sensor are fi tted.
If your vehicle has a spare wheel, this does not have a sensor.

104


Deactivation

In exceptional conditions (starting a vehicle which is bogged down,
stuck in snow, on soft ground, ...), it may be advisable to deactivate the
ASR and ESP systems, so that the wheels can move freely and regain
grip.


)
Press the "ESP OFF"
button, located in the centre of the
dashboard.
If this warning lamp on the instrument panel and the indicator
lamp on the button come on, this indicates that the ASR and
ESP systems are deactivated.
This action also deactivates the automatic operation of the
hazard warning lamps.


Reactivation

These systems are reactivated automatically each time the ignition is
switched back on.


)
You can also press the "ESP OFF"
button again to reactivate them
manually.
This action also reactivates the automatic operation of the hazard
warning lamps.


Operating fault

The ESP/ASR systems offer exceptional safety in normal driving,
but this should not encourage the driver to take extra risks or drive
at high speed.
The correct operation of these systems depends on observation of
the manufacturer's recommendations on


- wheels (tyres and rims),

- braking components,

- electronic components,

- assembly and repair procedures.
After an impact, have these systems checked by a PEUGEOT
dealer or a qualifi ed workshop.
If this warning lamp comes on, accompanied by an audible
signal and a message in the screen, this indicates a
malfunction of these systems.
Have it checked by a PEUGEOT dealer or a qualifi ed workshop dealer.

5/
SAFETY





AIRBAGS

The airbags have been designed to maximise the safety of the
occupants in the event of violent collisions. They supplement the action
of the force-limiting seat belts.
In this case, the electronic detectors record and analyse the front and
side impacts suffered in the impact detection zones:


- in the event of a serious impact, the airbags are deployed
instantaneously and protect the occupants of the vehicle;
immediately after the impact, the airbags defl ate rapidly so that they
do not hinder the visibility of the occupants or their possible exit
from the vehicle,

- in the event of a minor impact or rear impact and in certain roll-over
conditions, the airbags will not be deployed; the seat belt alone is
suffi cient to provide maximum protection in these situations.



The airbags do not operate when the ignition is off.

This equipment only operates once. If a second impact occurs
(during the same or a subsequent accident), the airbag will not
operate. The deployment of one or more airbags is accompanied by a
slight discharge of harmless smoke and a noise, due to the
activation of the pyrotechnic cartridge incorporated in the system.
This smoke is not harmful, but sensitive individuals may
experience some irritation.
The noise of the detonation may result in a slight loss of hearing
for a short time.


A.
Front impact zone.

B.
Side impact zone.


Impact detection zones

7/
CHECKS





























CHECKS

Unless otherwise indicated, check these components in accordance with
the Warranty and Maintenance Record and according to your engine.
Otherwise, have them checked by a PEUGEOT dealer or a qualifi ed
workshop.

BATTERY


AIR FILTER AND PASSENGER COMPARTMENT FILTER


OIL FILTER









PARTICLE EMISSION FILTER (DIESEL)


On a new vehicle, the fi rst particle fi lter regeneration operations
may be accompanied by a "burning" smell, which is perfectly
normal.
Following prolonged operation of the vehicle at very low speed or
at idle, you may, in exceptional circumstances, notice the emission
of water vapour at the exhaust on acceleration. This does not
affect the behaviour of the vehicle or the environment.
The battery does not require any maintenance.
However, check that the terminals are clean and correctly
tightened, particularly in summer and winter.
When carrying out work on the battery, refer to the "Practical
information" section for details of the precautions to be taken before
disconnecting the battery and following its reconnection.
Refer to the Warranty and Maintenance Record for details of
the replacement intervals for these components.
Depending on the environment (e.g. dusty atmosphere) and
the use of the vehicle (e.g. city driving), replace them twice
as often if necessary
(refer to the "Engines" section).
A clogged passenger compartment fi lter may have an adverse effect
on the performance of the air conditioning system and generate
undesirable odours. Replace the oil fi lter each time the engine oil is changed.
Refer to the Warranty and Maintenance Record for details of
the replacement interval for this component.
The start of saturation of the particle emissions fi lter is
indicated by the temporary illumination of this warning lamp,
accompanied by an audible signal and a message on the risk
of blockage of the particle emissions fi lter.
As soon as the traffi c conditions permit, regenerate the fi lter by driving
at a speed of at least 40 mph (60 km/h) until the warning lamp goes off.
If the warning lamp stays on, refer to the "Additive level" section.

8/
PRACTICAL INFORMATION








ENERGY ECONOMY MODE

System which manages the duration of use of certain functions to
conserve a suffi cient level of charge in the battery.
After the engine has stopped, you can still use functions such as
the audio and telematics system, windscreen wipers, dipped beam
headlamps, courtesy lamp, etc. for a maximum combined duration of
thirty minutes.
This period may be greatly reduced if the battery is not fully charged.


SWITCHING TO ECONOMY MODE

Once this time has elapsed, a message appears in the screen indicating
that the vehicle has switched to economy mode and the active functions
are put on standby.
If the telephone is being used at this time:


- it will be maintained for 5 minutes with the Bluetooth system
of your Peugeot Connect Sound,

- it will still be possible to fi nish the call with the Peugeot
Connect Media.



EXITING ECONOMY MODE

These functions are reactivated automatically next time the vehicle is
driven.
To restore operation of these functions immediately, start the engine
and let it run for at least 5 minutes.
Let the engine run for the period specifi ed to ensure that the battery
charge is suffi cient.
Do not repeatedly and continuously restart the engine in order to charge
the battery.
A fl at battery prevents the engine from starting (refer to the
"Battery" section).









LOAD REDUCTION MODE

System which manages the use of certain functions according to
the level of charge remaining in the battery.
When the vehicle is being driven, the load reduction function temporarily
deactivates certain functions, such as the air conditioning, the heated
rear screen...
The deactivated functions are reactivated automatically as soon as
conditions permit.