2011 Peugeot RCZ reset

0
CHECK/000
0.
5
1.5
2
.
54.5
12
6
7 5 4 3
tr/min
x1000
3.550 01/2
190
130
5.5mph
22
PETROL - DIESEL MANUAL
OR AUTOMATIC GEARBOX
IN
STRUMENT PANELS
DIALS



1.
Rev counter.

Indicates the speed of rotation of the engine (x 1 000 rpm).

2.
Coolant temperature.

Indicates the temperature of the engine coolant (° Celsius).

3.
Fuel level.

Indicates the quantity of fuel remaining in the tank.

4.
Vehicle speed.

Indicates the current speed of the moving vehicle (mph or km/h).

5.
Small display screen.


6.
Central display screen.


7.
Display management button.

Starts a manual CHECK.
Recalls the service information.
Resets the selected function to zero (trip distance recorder or
service indicator).

8.
Lighting rheostat button.

Adjusts the brightness of the lighting of the instruments and
controls.

With large central display screen


Panel. grouping together the vehicle operation indication dials and
warning lamps, with permanent back-lighting.
For more information, refer to the paragraph relating to the button
or function and its associated display.


With small central display screen

1/
INSTRUMENTS AND CONTROLS






SERVICE INDICATOR

This information is displayed for a few seconds when the ignition is
switched on. It informs the driver when the next service is due, in
accordance with the manufacturer's servicing schedule.
The point at which the service is due is calculated from the last indicator
zero reset. It is determined by two parameters:


- the distance travelled,

- the time elapsed since the last service.


More than 1 800 miles (3 000 km) remain before the next service is due

When the ignition is switched on, no service information appears on the
instrument panel central screen.


Between 600 miles (1 000 km) and 1 800 miles (3 000 km)
remain before the next service is due
For 7 seconds after the ignition is switched on, the spanner symbolising
the service operations comes on. The instrument panel central screen
indicates the distance remaining before the next service is due.

Example:
1 700 miles remain before the next service is due.
For 7 seconds after the ignition is switched on, the central screen
indicates:


Less than 600 miles (1 000 km) remain before the next service is due


Example:
500 miles remain before the next service is due.
For 7 seconds after the ignition is switched on, the central screen
indicates:

The spanner remains on
on the small
screen to indicate that a service must be
carried out soon.
Maintenance due in
1700 miles or
9 months
1700miles
Maintenance due in
500 miles or
2 months
500miles

mph
= 0
36

Service overdue

For 7 seconds after the ignition is switched on, the spanner fl ashes
to
indicate that the service must be carried out as soon as possible.

Example:
the service is overdue by 300 miles.
For 7 seconds after the ignition is switched on, the central screen indicates:

The spanner remains lit
on the small screen
to indicate that a service should have been
carried out.
The distance remaining may be weighted by the time factor,
depending on the driver's driving habits.
Therefore, the spanner may also come on if you have exceeded
the two year service interval.









Service indicator zero reset

Retrieving the service information

You can access the service information at any time.
This information appears when running through the manual check
procedure.


)
Briefl y press the "CHECK/000"
button.
The service information is displayed for a few seconds on
the instrument panel central screen, then disappears.

Following this operation, if you wish to disconnect the battery, lock
the vehicle and wait at least fi ve minutes for the zero reset to be
registered. After each service, the service indicator must be reset to zero.
The procedure for resetting to zero is as follows:


)
switch off the ignition,

)
press and hold the "CHECK/000"
button,

)
switch on the ignition; the distance recorder display begins a
countdown,

)
when the instrument panel central screen indicates "=0"
, release
the button; the spanner disappears from the small screen.
Interval
exceeded by
300 miles
-300miles

1/
CHECK/000
INSTRUMENTS AND CONTROLS












MANUAL CHECK

This function allows you to check the status of the vehicle (reminder
of the alert warnings and of the state of the confi gurable functions -
"activated" or "deactivated") and the service information.


)
With the engine running, to start a manual check, briefl y press the
"CHECK/000"
button on the instrument panel.
If no faults have been detected, "CHECK OK"
appears in the
instrument panel central screen.
If a "minor" fault has been detected, the warning lamp concerned then
"CHECK OK"
appear in the instrument panel central screen. Contact a
PEUGEOT or a qualifi ed workshop.
If a "major" fault has been detected, only the warning lamps concerned
appear in the instrument panel central screen. Have it checked by a
PEUGEOT dealer or a qualifi ed workshop.













DISTANCE RECORDERS

The total and trip distances are displayed for thirty seconds when
the ignition is switched off, when the driver's door is opened and when
the vehicle is locked or unlocked.
Measures the total distance travelled by the vehicle since its fi rst
registration.



Total distance recorder



)
With the ignition on, press and hold this button until zeros appear.



Trip distance recorder

Measures a distance travelled since it was reset to zero by the driver.
4.5
65
4
/min1000mph
CHECK/000
mph 55LIMIT Pause
CHECK/000
13 0110907
05
0
3010
6
7 5
4
/min1000mph
5.5
offmph55
CHECK
OK
/1h
04
/1h

1
2
40



- The current information tab with:


●
the range,

●
the current fuel consumption.



- The trip "1"
tab with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the fi rst trip.



- The trip "2"
tab with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the second trip.



)
Pressing the button again takes you to a black screen.
A further press returns you to the normal display.



TRIP ZERO RESET



)
When the trip required is displayed, press the button at the end of
the wiper stalk
for more than two seconds.



With the large central screen



)
When the required trip is displayed, press the "OK"
button on the
navigator
for the instrument panel with large central screen.



With the small central screen


Trips "1"
and "2"
are independent but their use is identical.
Trip "1"
permits, for example, daily calculations, and trip "2"
monthly
calculations.

1/
INSTRUMENTS AND CONTROLS






A FEW DEFINITIONS…


Range

(miles or km)
This indicates the distance which can still be travelled
with the fuel remaining in the tank in relation to the average fuel
consumption over the last few miles (kilometres) travelled.
This value may vary following a change in the style of driving
or the relief, resulting in a signifi cant change in the current fuel
consumption.
If dashes are displayed continuously while driving in place of the
digits, contact a PEUGEOT dealer or a qualifi ed workshop.
This function is only displayed from 20 mph (30 km/h). When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).

Current fuel consumption

(mpg or l/100 km or km/l)
This is the average fuel consumption during the last few
seconds.

Average fuel consumption

(mpg or l/100 km or km/l)
This is the average fuel consumption since the last trip
computer zero reset.


Average speed

(mph or km/h)
This is the average speed calculated since the last trip
computer zero reset (ignition on).


Distance travelled

(miles or km)
This indicates the distance travelled since the last trip
computer zero reset.

234
NAV
RADIO
AUX standard3
Reset video settings3
Off/Audio/Audio and Video (AV)
Ext. Device (Aux) management2
3

"Radio" Menu
FM

Waveband
1
2
3
AM3
Manual tune 2
Refer to the "Sound settings" menubelow.
Sound settings2
3


"Sound settings" Menu


Balance/Fader
1
2
Bass/Treble2
Equalizer 2
Linear3
Classic3
Jazz3
Rock/Pop3
Techno3
Vocal3
Mute rear speakers2
Loudness 2
Speed dependent volume2
Reset sound settings
2


"Navigation" Menu
Abort guidance/Resume guidance
1
2
Destination input2
Address input3

Country4
City 4
Street4

House number 4
Start route guidance4

Postal code4
Save to address book4

Intersection4
City district4
Geo position4

Map4
Navigate HOME3
Choose from last destinations3
Choose from address book3


Stopovers 2
Add stopover3
Address input4

Navigate HOME 4
Choose from address book4
Choose from last destinations 4
Rearrange route3
Replace stopover3
Delete stopover3

237
Display 2
Brightness3
Colour3
Steel4
blue light (only in day mode) 4
Orange Ray 4

Blue Flame4
Map colour3

Day mode for map4

Night mode for map4

Auto. Day/Night for map4


Units 2
Temperature3
Celsius 4

Fahrenheit 4
Metric/Imperial3
km4

Miles4


System 2
Factory reset3
Software version3
Automatic scrolling3