Page 5 of 276
CONTENTS
Steering lock - Starting 124Parking brake 125Hill start assist 126
Manual gearbox 127Gear shift indicator 128Automatic gearbox 129
Speed limiter 133Cruise control 136Parking sensors 139
Fuel tank 143Bonnet 145Petrol engines 146
Diesel engine 147Running out of fuel (Diesel) 148Checking levels 149
Checks 151
Temporary puncture repair kit 153Changing a wheel 160Changing a wiper blade 164
Energy economy mode 165Battery 166Changing a bulb 168Changing a fuse 175
Towing a vehicle 182Towing a trailer 184Cleaning and maintenance 186Accessories 187
6/DRIVING 124-141
7/CHECKS 142-152
8/PRACTICAL INFORMATION 153-188
ALPHABETICAL INDEX 261-265
VISUAL SEARCH 266-269
Petrol engines 189Weights (petrol) 190Diesel engine 191Weights (Diesel) 192Dimensions 193Identification markings 194
9/TECHNICAL DATA 189-194
Emergency or assistance 195Peugeot Connect Media 199Peugeot Connect Sound 243
10/AUDIO EQUIPMENT and TELEMATICS 195-260
Page 89 of 276
3/
EASE OF USE and COMFORT
The duration of lighting varies, depending on the context:
- when the ignition is off, approximately ten minutes,
- in energy economy mode, approximately thirty seconds,
- when the engine is running, no limit.
STORAGE BOX
This has areas for storing a box of spare bulbs, a fi rst aid kit, the
temporary puncture repair kit, a warning triangle, the removable ball
of the towbar system...
BOOT LAMPS
Your vehicle is fi tted with two boot lamps; one in the right-hand boot
side trim and a second in the centre under the rear shelf.
They come on automatically when the boot is opened and switch off
automatically when the boot is closed.
They cannot be deactivated manually.
A second warning triangle can be stored in the boot lid trim. It also contains the vehicle’s handbook pack.
For access to it:
)
raise the fl oor using the strap,
)
secure it in the vertical position behind the stops,
located on the sides of the boot.
Page 95 of 276
4/
ONO
FFA
IRB
A
G P
AS
S.
VISIBILITY
MANUAL ADJUSTMENT
OF HALOGEN HEADLAMPS
AUTOMATIC ADJUSTMENT
OF XENON HEADLAMPS
To avoid dazzling other road users, the height of the halogen bulb
headlamps must be adjusted according to the load in the vehicle.
0.
1 or 2 people in the front seats.
-. 3 people.
1.
4 people.
-. Intermediate setting.
2.
4 people + maximum authorised loads.
-. Intermediate setting.
3.
Driver + maximum authorised loads. In order to avoid causing a nuisance to other road users, this system
corrects the height of the xenon headlamp beams automatically and
when stationary, in relation to the load in the vehicle.
If a malfunction occurs, this warning lamp is displayed on
the instrument panel, accompanied by an audible signal and
a message in the screen.
The system then places your headlamps in the lowest position.
Initial setting is position "0". Do not touch the xenon headlamp bulbs.
Contact a PEUGEOT dealer or a qualifi ed workshop.
Page 170 of 276
168
CHANGING A BULB
The headlamps are fi tted with polycarbonate glass with a
protective coating:
)
do not clean them using a dry or abrasive cloth, nor with
a detergent or solvent product,
)
use a sponge and soapy water,
)
when using a high pressure washer on persistent marks, do
not keep the lance directed towards the lamps or their edges
for too long, so as not to damage their protective coating
and seals.
)
Do not touch the bulb directly with your fi ngers, use lint-free
cloths.
Changing a bulb should only be done after the headlamp has
been switched off for a few minutes (risk of serious burns).
It is imperative to use only anti-ultraviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a new bulb with the same type
and specifi cation.
FRONT LAMPS
Model with halogen headlamps
1.
Direction indicators (PY 21W amber).
2.
Dipped beam headlamps (H7 - 55W).
3.
Main beam headlamps (H1 - 55W).
4.
Daytime running lamps/sidelamps (P 21/5W).
5.
Foglamps (H8 - 35W).
Page 171 of 276
8/
PRACTICAL INFORMATION
1.
Direction indicators (PY21W SV silver).
2.
Directional dipped/main beam headlamps (D1S-35W).
3.
Additional main beam headlamps (H1-55W).
4.
Daytime running lamps/sidelamps (P21/5W).
5.
Foglamps (H8-35W).
Model with xenon and directional headlamps
Risk of electrocution
Xenon bulbs (D1S-35W) must be replaced by a PEUGEOT dealer
or a qualifi ed workshop.
Changing direction indicator bulbs
)
Turn the bulb holder a quarter of a turn and extract it.
)
Pull the bulb and change it.
To refi t, carry out these operations in reverse order.
Amber or silver coloured bulbs, such as the direction indicators,
must be replaced with bulbs of identical specifi cations and colour.
When refi tting, close the protective cover carefully to assure
the sealing of the headlamp.
Page 172 of 276
170
Changing dipped beam headlamp bulbs
)
Remove the protective cover by pulling on the tab.
)
Disconnect the bulb connector.
)
Spread the springs to release the bulb.
)
Extract the bulb and change it.
To refi t, carry out these operations in reverse order.
Changing main beam headlamp bulbs
)
Remove the protective cover by pulling on the tab.
)
Disconnect the bulb connector.
)
Compress the springs to release the bulb.
)
Remove the bulb and change it
To refi t, carry out these operations in reverse order.
Changing daytime running lamp/sidelamp bulbs
)
Remove the protective cover by pulling on the tab.
)
Disconnect the bulb connector.
)
Turn the bulb holder a quarter of a turn and extract it.
)
Pull the bulb and change it.
To refi t, carry out these operations in reverse order.
Page 173 of 276
8/
PRACTICAL INFORMATION
Changing integrated direction indicator side repeaters
Changing front foglamp bulbs
REAR LAMPS
1.
Sidelamps (LEDs).
2.
Direction indicators (LEDs).
3.
Brake lamps/sidelamps (P21/5W).
4.
Reversing lamps (P21W).
5.
Foglamp (P21W).
To replace these bulbs contact a PEUGEOT dealer or a qualifi ed
workshop.
For the replacement of these bulbs, contact a PEUGEOT dealer or a
qualifi ed workshop.
Page 174 of 276
172
Changing brake lamps/sidelamps
This bulb is changed from outside the boot, having fi rst removed
the rear lamp:
)
open the boot lid,
)
unclip the access fl ap of the corresponding side trim, then remove it,
)
unclip the lamp taking hold of it at the base, then tilt it,
)
turn the bulb holder one quarter of a turn and remove it,
)
turn the bulb one quarter of a turn and change it.
To refi t, carry out these operations in reverse order.
)
disconnect the lamp connector,
)
remove the two lamp fi xing bolts,
