2011 Peugeot M59 reset

CONTENTS
2-
54 - 57  VISIBILITY
Lights 54
Windscreen wiper stalk 55
Electric windows 56
Rear windows 56
Exterior mirrors 57
Interior mirror 57
32 - 45  SEATS
Front seats 32
Multifunction passenger seat 34
Rear bench seat (5 seat version) 35Rear bench seats (7 seat version) 36
Child seats 38
Installing child seats using the
seat belt 40
Isofi x mountings 41
Isofi x child seat 42
Seat belts 44
46 - 53  ACCESS AND STARTING
Keys 46
Alarm 48
Front and side doors 49
Rear doors 51
Opening the bonnet 53
Filling with fuel 53
4 - 16  FAMILIARISATION
17 - 25 
INSTRUMENTS, CONTROLS AND DISPLAYS
Instrument panel 18
Warning lamps 19
Temperature indicator 21
Instrument panel display 22
Distance recorder zero reset 24
Lighting rheostat 24
Clock 24
Display A 25
26 - 31  COMFORT
Ventilation 26
Heating 28
Air conditioning 30

23 INSTRUMENTS, CONTROLS and DISPLAYS
-

Engine oil level indicator

When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Flashing of the six squares and dis-
playing of "max" indicate a surplus of
oil which could damage the engine.
If the surplus of oil is confi rmed by
a check using the dipstick, contact a
PEUGEOT dealer without delay. Your PEUGEOT dealer carries out
this operation after each service.
The reset procedure is as follows:


- Switch off the ignition.

- Press and hold button 1
.

- Switch on the ignition.
The display begins a 10 second
countdown.


-
Keep button 1
pressed for 10 seconds.

The display shows [=0]
and the span-
ner disappears.

Flashing of the six segments and dis-
playing of "min" indicate a lack of oil
which could damage the engine.
If the lack of oil is confi rmed by a
check using the dipstick, it is essential
that the level is topped up. Flashing of the six segments indi-
cates a malfunction of the oil level
indicator.
There is a risk of damage to the engine.


Consult a PEUGEOT dealer.

The level read on the dipstick or on
the indicator will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.








Resetting the service indicator

Surplus of oil

Lack of oil
Oil level indicator fault

INSTRUMENTS, CONTROLS and DISPLAYS
24 -
Briefl y pressing button 1
alternates
between the total and trip distance
displays.
To reset the trip recorder to zero,
when it is displayed press button 1

until zeros appear.


Total distance recorder

With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum (or
maximum) setting, release the button
then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the required
brightness, release the button.
LIGHTING RHEOSTAT CLOCK
Button 1
: hour adjustment
Button 2
: minute adjustment
Press and hold the button for rapid
advance.

VISUAL INDEX126 -

INSTRUMENTS AND CONTROLS

Overhead storage, sun visor,
courtesy lamp ............... 14, 58-59
Rear view mirrors ...................... 57
Instrument panel, dials,
speedometer ........................... 18
Warning lamps, indicator lamps .... 19-21
Indicators, displays, screen ..... 21-25
Setting the time, dimmer,
resetting to zero ................. 23-24
Interior fuses ......................... 88-90
Parking brake, handbrake ...... 64, 78 Front fi ttings .......................... 58-59 Electric windows ........................ 56
Signal/hazard warning lamps .... 60
Audio system .................... 113-124
Fitting audio equipment,
speakers .................................. 93
Heating/Air conditioning........ 26-31


- vent, demisting, defrosting,

- air conditioning A/C,

- air recirculation,

- ventilation.
Opening the bonnet ............. 16, 53