2011 Peugeot M59 seats

35SEATS-
To fold the rear bench seat:


- lower the head restraint,

- press control 1
to unlock the seat
back 2
,

- fold the seat back 2
onto the seat,

- place the seat in the "folded"
position. When repositioning:


- tilt the folded seat rearwards,

- lift the seat back,

- check that the seat is locked cor-
rectly.

Take care not to trap the seat belts.


REAR BENCH SEAT(5 SEAT VERSION)


HEAD RESTRAINT

This is of the "comma" type.
High position: press the two tabs at
the same time, lift the head restraint
and raise it.
Low position: push the two tabs at
the same time and press the top to
lower the head restraint.
To remove the head restraint: place
it in the high position, lift it then re-
move it.
Store it inside the vehicle, securing
it fi rmly.
To install the head restraint: engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.

SEATS36-
REAR BENCH SEATS (7 SEAT VERSION)


The bench seats of row 2 and row 3
are independent and adjustable.


Row 2 bench seat


Placing the bench seat in the
table position


- Lower the head restraints fully.

- Operate the control to fold the
seat back onto the bench seat
cushion.


Returning the seat back to the
sitting position


-
Return the seat back to its original
position and check that it is secured
on the pillar of the vehicle.



Placing the bench seat in the fully
folded position


- Place the seat in the table position.

- Pull the handle, located behind
the bench seat, to release the
feet from their anchorage on the
fl oor.

- Tilt the bench seat forwards.


Returning the bench seat to its
original position
Before folding the bench
seat, ensure that:


- in row 3, no passenger's foot is
at one of the bench seat anchor-
ages on the fl oor,

- the seat belt is available for the
side passenger.


- Fold back the bench seat.

37SEATS-

Row 3 bench seat


Placing the seat back in the table
position


- Lower the head restraints fully.

- Operate the two controls simulta-
neously to fold the seat back onto
the bench seat cushion.



Returning the seat back to the sitting position


- Return the seat back to its original position
and check that it is secured on the pillars of
the vehicle.



Placing the bench seat in the fully
folded position


- Place the seat in the table position.

- Raise the handle, located behind
the bench seat, to release the feet
from their anchorage on the fl oor.

- Tilt the bench seat forwards.


Returning the bench seat to its
original position


- Before folding back the bench
seat, ensure that the seat belt is
available for the side passengers.

- Fold back the bench seat.


Access to row 3

From the vehicle's right-hand sliding
door, a passage next to the row 2
bench seat provides access to the
row 3 bench seat.


Good practice

Do not place hard or heavy
objects on the seat backs
forming a table, they could
become dangerous projectiles in the
event or sharp braking or impact.
Following the various operations:


- do not remove a head restraint
without storing it, fi x it to a sup-
port in the vehicle,

- do not block the passage to row 3,

- ensure that the passengers can
always access the seat belts and
fasten them easily,

- a passenger must never take his
seat without adjusting and fastening
his seat belt.

- a passenger seated in row 3 must
ensure that he does not obstruct
the row 2 bench seat anchoring
recesses.

SEATS38-
GENERAL POINTS RELATINGTO CHILD SEATS

Although one of PEUGEOT's main
criteria when designing your vehicle,
the safety of your children also de-
pends on you.
For maximum safety, please follow
these precautions:


- all children under the age of 12
or less than one metre fi fty tall
must travel in approved child
seats suited to their weight
,
on seats fi tted with a seat belt or
ISOFIX mountings * .

- a child weighing less than 9 kg
must travel in the "rearwards-
facing" position in the front.




"Forwards-facing"
When a "forwards-facing" child seat
is installed on the front passenger
seat
, adjust the vehicle's seat to the
intermediate longitudinal position
with the seat back upright and leave
the passenger's airbag activated.

*
The rules for carrying children are
specifi c to each country. Refer to the
current legislation in your country.
Intermediate longitudinal position

"Rearwards-facing"
When a "rearwards-facing" child seat
is installed on the front passen-
ger seat
, you must deactivate the
passenger's airbag * . Otherwise, the
child would risk being seriously
injured or killed if the airbag were
to infl ate
.

39SEATS-
CHILD SEATS RECOMMENDED BY PEUGEOT

PEUGEOT offers a complete range of recommended child seats which are
secured using a three point seat belt
:


Group 0+: from birth to 13 kg






L1


"RÖMER Baby-Safe Plus"
Installed in the rearwards-facing position.


Groups 2 and 3: from 15 to 36 kg






L3


"RECARO Start''



L4

"KLIPPAN Optima"
From the age
of 6 years
(approximately
22 kg), the booster
is used on its own.




L5


"RÖMER KIDFIX"
Can be fi tted to the vehicle's ISOFIX mountings.
The child is restrained by the seat belt.

Passenger airbag OFF

SEATS
40-
INSTALLING CHILD SEATS SECURED USING THE SEAT BELT

In accordance with European regulations, this table indicates the options for the installation of child seats secured using the
seat belt and approved for universal use (a), according to weight of the child and the seat in the vehicle:



Weight of the child and indicative age




Seat



Below 13 kg


(groups 0 (b) and 0+)
Up to 1 year approx

From 9 to 18 kg


(group 1)
From 1 to 3 years
approx

From 15 to 25 kg


(group 2)
From 3 to 6 years
approx

From 22 to 36 kg


(group 3)
From 6 to 10 years
approx
Front passenger (c)

U



U



U



U






Row 2 Outer

U



U



U



U


Centre

U



U



U



U






Row 2 Right

U



U



U



U


Left

U



U



U



U


Row 3 Outer

U



U



U



U


Centre

U



U



U



U

41SEATS-
"ISOFIX" MOUNTINGS
These are two rings located between
the seat back and the seat cushion.
This ISOFIX mounting system guar-
antees reliable, safe and fast fi tting of
the child seat in your vehicle.
The ISOFIX child seats
are fi tted
with two locks which are secured
easily on these rings. Your vehicle has been approved in ac-
cordance with the ISOFIX regulation
.
The seats, represented below, are fi t-
ted * with regulation ISOFIX mountings: (a) Universal child seat: child seat
which can be installed in all ve-
hicles using the seat belt.
(b) Group 0: from birth to 10 kg.
(c) Refer to the legislation in force
in your country before installing
your child on this seat.

U
Seat suitable for the installation of
a child seat secured using a seat
belt and universally approved, "rear
facing" and/or "forward facing".

*
Ludospace 7 seat version: mountings
not available.

SEATS
42-
ISOFIX CHILD SEAT RECOMMENDED BY PEUGEOT AND APPROVED FOR YOUR VEHICLE



Isofi x KIDDY



Group 0+: from birth to 13 kg

Group 1: from 9 to 18 kg

Installed in the rear facing position, on the rear side seat only.
Installed in the forwards facing position.
The body of this child seat must be in contact with the back of the vehicle's front seat. It is imperative that the vehicle's front seat is adjusted to the intermediate longitudinal position.
This child seat can also be used on
seats which are not fi tted with ISOFIX
mountings. In this case, it is compulsory to se-
cure the child seat to the vehicle's
seat using the three-point seat belt.
Follow the instructions for fi tting
the child seat indicated in the seat
manufacturer's installation guide.