Page 28 of 340

26
Instruments and controls
   
 
 
 
 
 
 
 
 
 
Warning lamps 
 
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on 
the par t of the driver. 
  Any fault resulting in the illumination of a warning lamp must be investigated fur ther by reading the associated message in the instrument panel screen. 
  If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.  
 
   
 
Warning/indicator lamp 
 
   
 
State 
 
   
 
Cause 
 
   
 
Action/Observations 
 
 
 
 
 
  
 
 
STOP 
 
   
fixed, associated 
with another warning 
lamp, accompanied 
by an audible signal 
and a message in the 
screen.    It is associated with a punctured 
wheel, the braking system, the power 
steering, the engine oil pressure, 
the engine coolant temperature or a 
major electrical fault.   Stop as soon as it is safe to do so as the engine may 
cut out. 
  Park, switch off the ignition and call a PEUGEOT 
dealer or a qualified workshop. 
   
 
  
 
 
Service 
 
   
on temporarily.   Minor faults have occurred for which 
there is no specific warning lamp.   Identify the fault by reading the message shown in the 
screen, such as, for example: 
   
 
-   the engine oil level, 
   
-   saturation of the par ticle emissions filter (Diesel). 
   
-   the power steering, 
   
-   a minor electrical fault. 
   
-  ...  
  For any other faults, contact a PEUGEOT dealer or a 
qualified workshop. 
   
fixed.   Major faults have occurred for which 
there is no specific warning lamp.   Identify the fault by reading the message shown in 
the screen and then contact a PEUGEOT dealer or 
qualified workshop.  
     
        
        Page 31 of 340
1
29
Instruments and controls
   
 
Warning or indicator lamp 
in the instrument panel   
  
 
 
State 
 
   
 
Cause 
 
   
 
Action/Observations 
 
 
 
 
 
  
 
 
Engine oil 
pressure 
 
    
fixed.   There is a fault with the engine 
lubrication system.   You must stop as soon it is safe to do so. 
  Park, switch off the ignition and contact a PEUGEOT 
dealer or a qualified workshop. 
   
 
  
 
 
Battery charge 
 
   
fixed.   The battery charging circuit has a 
fault (dir ty or loose terminals, slack or 
cut alternator belt, ...).   The warning lamp should go off when the engine is 
started. 
  If it does not go off, contact a PEUGEOT dealer or a 
qualified workshop. 
   
 
  
 
 
Door(s) open 
 
   
fixed, associated with 
a message identifying 
the door, if the speed is 
below 6 mph (10 km/h).    A door or the boot is still open.   Close the door or boot. 
   
fixed, associated with a 
message identifying the 
door, and accompanied 
by an audible signal if 
the speed is above 
6 mph (10 km/h).   
     
        
        Page 33 of 340

1
31
!
Instruments and controls
   
 
 
 
 
 
 
 
 
 
 
 
Coolant temperature gauge 
 
With the engine running, when the needle is: 
   
 
-   in zone  A 
, the temperature is correct, 
   
-   in zone  B 
, the temperature is too high; the 
central  STOP 
 warning lamp comes on, 
accompanied by an audible signal and a 
message in the instrument panel screen.  
   
You MUST stop as soon as it is safe to do so.   
  Wait a few minutes before switching off the 
engine. 
  Contact a PEUGEOT dealer or a qualified 
workshop.     
After driving for a few minutes, the temperature 
and pressure in the cooling system increase. 
  To top up the level: 
   
 
 ) 
  wait for the engine to cool, 
   
 ) 
  unscrew the cap by two turns to allow the 
pressure to drop, 
   
 ) 
  when the pressure has dropped, remove 
the cap, 
   
 ) 
  top up the level to the "MA X" mark.  
 
  On switching on the ignition or when driving, it 
indicates the engine oil temperature. 
  With the needle in zone  C 
, the temperature is 
correct. 
  With the needle in zone  D 
, the temperature is 
too high. 
  Slow down to lower the oil temperature.  
 
 
Engine oil temperature 
gauge 
   
Be aware of the risk of burns when 
topping up the cooling system. Do not 
fill above the maximum level (indicated 
on the reservoir).