14
FAMILIARISATION
  SEEING CLEARLY 
   
Lighting 
 
 
Ring A 
  Lighting off. 
   
Ring B   Sidelamps. 
  Dipped/main beam headlamps.  
  Rear foglamp. 
  or 
  Front and rear foglamps.    Automatic illumination of head-
lamps. 
  89  
 
 
 
Direction indicators 
 
Raise or lower the lighting stalk passing 
the point of resistance; the correspond-
ing direction indicators will fl ash for as 
long as the stalk remains in this position. 
   
"Motorway" function 
  Press the lighting stalk up or down once, 
without passing the point of resistance; 
the corresponding direction indicators 
will fl ash three times. 
  This function can be used at any speed, 
but it is particularly useful when chang-
ing lane on high-speed roads. 
  124  
 
 
 
Wipers 
 
 
Stalk A: windscreen wipers  
   
Switching on "AUTO" 
   
 
 ) 
  Press the stalk down and release it.  
 
   
Switching off "AUTO" 
   
 
 ) 
  Push the stalk up and return it to po-
sition  "0" 
.  
  94  
   
Ring B: rear wiper 
  Park. 
  Intermittent wipe. 
  Wash-wipe. 
  95  
  
185
PRACTICAL INFORMATION
   
Risk of electrocution 
   
Xenon bulbs (D1S-35W) must 
be replaced by a PEUGEOT 
dealer or a qualifi ed  workshop.  
 
 
 
 
 
 
 
 
 
 
 
 
 
CHANGING A BULB 
 
 
 
 
 
 
 
 
Model with halogen headlamps 
   
 
1. 
  Direction indicators
(HP24 amber-24W). 
 
   
2. 
  Dipped beam headlamps 
(H7-55W). 
 
   
3. 
  Main beam headlamps (H7-55W). 
 
   
4. 
  Daytime running lamps 
(HP24-24W). 
 
   
5. 
  Foglamps (PS24-24W). 
 
   
6. 
  Sidelamps (W5-5W). 
 
 
 
    
 
1. 
  Direction indicators 
(HP24 amber-24W). 
 
   
2. 
  Dipped/main beam directional 
headlamps (D1S-35W). 
 
   
3. 
  Daytime running lamps/
sidelamps (P21/5W). 
 
   
4. 
  Foglamps (PS24-24W). 
 
 
     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Model with xenon and directional 
headlamps   The headlamps are fi tted  with 
polycarbonate glass with a 
protective coating: 
   
 
 ) 
  do not clean them using a dry 
or abrasive cloth, nor with a 
detergent or solvent product, 
 
   
 ) 
  use a sponge and soapy water, 
   
 ) 
  when using a high pressure wash-
er on persistent marks, do not 
keep the lance directed towards 
the lamps or their edges for too 
long, so as not to damage their 
protective coating and seals.  
 
 
Front lamps  
 
 
 
 
 ) 
  Do not touch the bulb directly with 
your fi ngers, use lint-free cloths.  
  Changing a bulb should only be 
done after the headlamp has been 
switched off for a few minutes (risk of 
serious burns). 
  It is imperative to use only anti-ultraviolet 
(UV) type bulbs in order not to damage 
the headlamp. 
  Always replace a failed bulb with a 
new bulb with the same type and 
specifi cation.