9
FAMILIARISATION
1.
Cruise control/speed limiter switches.
2.
Steering wheel adjustment control.
3.
Lighting and direction indicator
control stalk.
4.
Instrument panel.
5.
Driver's airbag.
Horn.
6.
Gear lever.
7.
Parking brake.
8.
12 V accessory socket.
9.
Heated seat control.
10.
Door mirror controls.
Electric window controls.
11 .
Bonnet release.
12.
Fusebox.
13.
Manual headlamp height
adjustment.
Stop & Start button.
14.
Side adjustable air vent.
15.
Front side window demisting vent.
16.
Speaker (tweeter).
17.
Windscreen demisting vent.
INSTRUMENTS AND CONTROLS
!
i
i
18
FAMILIARISATION
DRIVING SAFELY
Stop & Start
The "ECO"
warning lamp
comes on in the instrument
panel and the engine is put au-
tomatically into standby: The "ECO"
warning lamp goes
off and the engine restarts au-
tomatically:
You can deactivate the system at
any time by pressing the "ECO OFF"
switch; the warning lamp in the button
comes on.
Activation/Reactivation
129
Going into engine STOP mode
Going into engine START mode
- with a manual gearbox;
at speeds
below 12 mph (20 km/h), when you
put the gear lever into neutral and
release the clutch pedal,
In certain circumstances, STOP mode
may not be available; the "ECO"
warn-
ing lamp fl ashes for a few seconds,
then goes off.
128
- with a manual gearbox;
when you
fully
depress the clutch pedal.
If you engage a gear without fully de-
pressing the clutch pedal, the engine
will not restart automatically. An alert
message is displayed asking you fully
depress the clutch pedal.
129
The system is reactivated auto-
matically every time the engine is
started with the key.
Before refuelling or doing anything
under the bonnet, you must switch
off the ignition with the key. In certain circumstances, START mode
may be invoked automatically; the
"ECO"
warning lamp fl ashes for a few
seconds, then goes off.
2
51
MULTIFUNCTION SCREENS
- The current information tab
with:
●
the range,
●
the current fuel
consumption,
●
the distance remaining to
be travelled or the Stop &
Start counter.
- The trip "1"
tab with:
●
the distance travelled,
●
the average fuel
consumption,
●
the average speed,
for the fi rst trip.
- The trip "2"
tab with:
●
the distance travelled,
●
the average fuel
consumption,
●
the average speed,
for the second trip.
)
Pressing the button again takes you
to a black screen.
A further press returns you to the normal
display.
Trip zero reset
With the monochrome screen C or
the instrument panel small screen
)
When the trip required is displayed,
press the button on the end of the
wiper stalk
for more than two sec-
onds.
With the instrument panel
large central screen
)
When the required trip is displayed,
press the "OK"
button on the instru-
ment panel navigator
, associated
with Peugeot Connect Media, for
more than two seconds.
Trips "1"
and "2"
are independent but
their use is identical.
For example, trip "1"
can be used for
daily fi gures, and trip "2"
for monthly
fi gures.