rEmotE KEylE ss Entry systE m
The Remote keyless entry System allows you to lock or
unlock your vehicle and turn on the interior lights.
To lock the vehicle, press the
button on your keyfob.
To unlock the vehicle, press the
button on your
keyfob.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
outsi DE mirror Control sWit CH
Move the switch
01 right or left to select the right or
left mirror.
Adjust each mirror to the desired position using the
switch
02 .
f
or more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
s Eat aDJ ustmEnts
Pull up on the lever
01 under the front of the seat
and slide forward or backward. Release the lever to
lock the seat in position.
Pull up on the lever
02 and lean back to recline the
seatback. To bring the seatback forward, pull the
lever up and lean your body forward. Release the
lever to lock the seatback in position.
SeAT LifTe R (for driver’s seat)
Turn either dial
03 to adjust the angle and height of
the seat cushion to the desired position.
for more information, refer to the “safety –– seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.02
01
03
02
01
3
first drive features
4
first drive features
HEaDliGHt Control sWit CH
Turn the headlight control switch
01 to the
position to turn on the front parking, tail, license
plate and instrument panel lights.
Turn the switch
01 to the
position to turn on
the headlights.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
01
startin G/stoPPin G tHE EnG in E
AuTOMATic TRAn SMiSS iO n (if so equipped)
depress the brake pedal.
Move the shift lever to P (PAR k).
Turn the ignition switch to start.
MA nuAL TRA nSM iSS iO n (if so equipped)
depress the brake pedal.
Move the shift lever to n (neutral).
depress the clutch pedal to the floor.
Turn the ignition switch to start.
T uRnin G THe en Gine Off
f or an automatic transmission, move the shift lever to the P (PAR k) position, apply the parking
brake and turn the ignition switch to the loCK position.
f or a manual transmission, apply the foot brake, place the vehicle in first gear, apply the parking
brake and turn the ignition switch to the loCK position.
for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.
