2011 NISSAN X-TRAIL check engine


> (GLW    0RGHO 7$@
8-12
Maintenance anddo-it-yours elf
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Remove theplastic coverovertheoilfilter location
by removing thesmall plastic clipsasillustrated.
(For QR25DE engine)
5. Loosen theoilfilter withanoilfilter wrench.
6. Remove theoilfilter byturning itby hand.
7. Wipe theengine oilfilter mounting surfacewitha
clean cloth.
Be sure toremove anyoldgasket remaining onthe
mounting surface. 8.
Apply newengine oiltothe gasket ofthe new oil
filter.
9. Screw inthe oilfilter untilaslight resistance isfelt
and then tighten anadditional 2/3ofaturn to
secure thefilter.
Oil filter tightening torque:
15 to20 N´m
(1.5 to2.0 kg-m, 11to15 ft-lb)
10. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
29 to39 N´m
(3.0 to4.0 kg-m, 22to29 ft-lb)
11. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
When fillingtheengine oil,donot remove
the dipstick.
12. Securely installtheoilfiller cap.
13. Start theengine.
14. Check thedrain plugforany sign ofleakage.
15. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
16. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .) R9M
engine:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SDI2149
1 Oilfiller element
2 O-ring
3 Oilfilter cover
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Loosen theoilfilter cover withawrench.
5. Remove theengine oilfilter cover thentheoilfilter
element.
6. Remove therubber O-ring fromthefilter cover.
7. Wipe theentire oilfilter cover withaclean cloth.
Be sure toremove anyoldO-ring remaining onthe
mounting surface. 8.
Apply newengine oiltothe O-ring.
Install thenew O-ring onthe new oilfilter element.
9. Insert theoilfilter element intotheengine oilfilter
cover.
10. Screw inthe oilfilter cover untilaslight resistance
is felt, and then tighten thefilter completely .
Oil filter cover tightening torque:
25 N´m
(2.6 kg-m, 18ft-lb)
11. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
50 N´m
(5.1 kg-m, 36.9ft-lb)
12. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
13. Securely installtheoilfiller cap.
14. Start theengine.
15. Check thedrain plugforany sign ofleakage.
16. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
17. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .)
After operation
T32A1308 27-3D1A869 1-255E-47E3-9C50-DDE5 E8CFBD36
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
PRO TECT ENVIRONMENT
T32A1308 27-208605 74-F3E8-4014 -8CD9-B62C347302 4F
It is illegal topollute drains,watercourses andsoil. Use
authorized wastecollection facilities,including civil
amenity sitesandgarages providing facilitiesfor
disposal ofused oiland used oilfilters. Ifin doubt,
contact yourlocal authority foradvice ondisposal.
The regulations concerningthepollution ofthe
environment willvary from country tocountry.
Maintenance anddo-it-yours elf
8-13
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-14
Maintenance anddo-it-yours elf
T32A130827- 88FE8B68-7E C8-43A9-87D9-027F2C7 FD6F9
JVM0398X
QR25DE engine
1. Crankshaft pulley
2. Drive beltauto-tensioner
3. Water pump
4. Alternator
5. Airconditioner
compressor
SDI1881
MR20DD engine
1. Alternator
2. Drive beltauto-tensioner
3. Crankshaft pulley
4. Airconditioner compressor
5. Water
pump
JVM0439X
R9M engine
1. Water pump
2. Idlerpulley
3. Alternator
4. Crankshaft pulley
5. Drive beltauto-tensioner
6. Airconditioner compressor
Be sure theignition switchisin the ªOFFº position.
Visually inspectthebelt forsigns ofunusual wear,cuts,
fraying orlooseness. Checkregularly forcondition. If
the belt isin poor condition orloose, haveitreplaced
or adjusted byaNISSAN dealer.
GUID-15F3 0443-A743-4 FB1-8DD2-0348CDB 56899
WARNING:
Be sure theengine andignition switchareoff
and that theparking brakeisapplied.
Replace thespark plugs according tothe maintenance
log shown inaseparate maintenance booklet.
If replacement isrequired, contactaNISSAN dealer.
IRIDIUM- TIPPEDSPARK PLUGS
GUID-D07673 71-DD30-47E5-8EA2-C 3004E7D8 712
SDI2020
It is not necessary toreplace theiridium-tipped spark
plugs asfrequently asthe conventional typeofspark
plugs. These sparkplugs aredesigned tolast much
longer thantheconventional typeofspark plugs.
CAUTION:
. Donot reuse theiridium-tipped sparkplugs
by cleaning orre-gapping.
. Always replace withtherecommended ir-
idium-tipped sparkplugs.
DRIVE BELT SP
ARK PLUGS (gasoline engine
models)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-25E462 0C-DE5B-4B 75-B071-642C43C0D2 7B
CHECKING PARKING BRAKE
T32A130 827-B3B65B 74-4F6E-4C29-8235-6 9F87496ED8 E
Pedal type
GUID-7CD8 8690-D8CF-43E1-96DF-F C6437C 41039
SDI1391D
From thereleased position,depresstheparking brake
pedal slowly andfirmly .If the number ofclicks isout of
the range listed, seeaNISSAN dealer.
6 to 7clicks
Depressing force196N(20 kg,44lb)
Switch type
GUID-56D 5F3BC-8A8 D-4E65-838 8-10DE21AC 8A13
Periodically checktheholding abilityofthe parking
brake byparking onasteep hilland restraining the
vehicle byusing onlytheparking brake.Ifitdoes not
hold satisfactorily ,see aNISSAN dealer.
CHECKING FOOTBRAKE PEDAL
T32A130 827-1F622C6 B-DF2B-4E16-B146-D21BEC4F89C 4
DI1020MR
WARNING:
See aNISSAN dealerforabrake system checkif
the foot brake pedalheight doesnotreturn to
normal.
With theengine running, checkthedistance between
the upper surface ofthe pedal andthemetal floor.Ifit
is out therange listed, seeaNISSAN dealer.
Depressing force
490 N(50 kg,110 lb)
LHD model RHDmodel
*
A
: 75 mm (3.0 in)or
more
*
A
: 85 mm (3.3 in)or
more
Self-adjusting brakes
T32A130827-D 013BB8E-379E-4FA2-A485- E22643A173 FA
Y our vehicle isequipped withself-adjusting brakes.
The disc-type brakesself-adjust everytimethefoot
brake pedalisapplied.
Brake padwear warning
T32A130827-4 DBFEE6A-552E-465B-9 896-BF7E8484B818
The disc brake padshaveaudible wearwarnings.
When abrake padrequires replacement, itwill make a
high pitched scraping soundwhenthevehicle isin
motion. Thisscraping soundwillfirst occur onlywhen
the brake pedalisdepressed. Aftermore wearofthe
brake pad,thesound willalways beheard evenifthe
brake pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe wear warning
sound isheard.
Under somedriving orclimate conditions, occasional
brake squeaks, squealsorother noises maybeheard.
Occasional brakenoiseduring lighttomoderate stops
is normal anddoes notaffect thefunction or
performance ofthe brake system.
Proper brakeinspection intervalsshouldbefollowed.
For additional information, seeaseparate maintenance
booklet.
BRAKE BOOSTER
T32A1308 27-44610C 9A-C5C7-4D F3-80B7-849 08CFA7E50
Check thebrake booster function asfollows:
1. With theengine off,depress andrelease thefoot
brake pedalseveral times.When thebrake pedal
movement (distanceoftravel) remains thesame
from onepedal application tothe next, continue on
to the next step.
2. While depressing thefoot brake pedal, startthe
engine. Thepedal height should dropalittle.
3. With thefoot brake pedaldepressed, stopthe
engine. Keep thepedal depressed forabout 30
seconds. Thepedal height should notchange.
Maintenance anddo-it-yours elf
8-15
BRAKES
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-16
Maintenance anddo-it-yours elf
4. Run theengine for1minute without depressing
the foot brake pedal, thenturnitoff. Depress the
foot brake pedalseveral times.Thepedal travel
distance willdecrease graduallywitheach de-
pression asthe vacuum isreleased fromthe
booster.
If the brakes donot operate properly,have thebrakes
checked byaNISSAN dealer.
T32A1308 27-1040D2 29-3352-49 17-A316-DB46DD616FA8
WARNING:
. Use only newfluid from asealed container.
Old, inferior, orcontaminated fluidmay
damage thebrake system. Theuseof
improper fluidscandamage thebrake
system andaffect thevehicle's stopping
ability.
. Clean thefiller capbefore removing.
. Brake fluidispoisonous andshould be
stored carefully inmarked containers out
of the reach ofchildren.
CAUTION:
Do not spill thefluid onpainted surfaces. This
will damage thepaint. Iffluid isspilled, washit
off with plenty ofwater
immediately.
JVM0422X
*
A
LHD models
*
B
RHD models
Check thefluid level inthe reservoir. Ifthe fluid is
below theMIN line
*
2
, the brake warning lightwill
illuminate. Addfluiduptothe MAX line
*
1
. (See
ªRecommended Fluids/lubricants andcapacitiesº (P.9- 2)
for recommended typesoffluid.)
If the fluid must beadded frequently ,the system should
be thoroughly checkedbyaNISSAN dealer.
BRAKE FLUID
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-C7D597 B5-5EE0-4D 20-AB94-274D1A7623E0
WARNING:
. Use only newfluid from asealed container.
Old, inferior, orcontaminated fluidmay
damage theclutch system.
. Clean thefiller capbefore removing.
. Clutch fluidispoisonous andshould be
stored carefully inmarked containers outof
the reach ofchildren.
CAUTION:
Do not spill theclutch fluidonpainted surfaces.
This willdamage thepaint. Ifclutch fluidis
spilled, washitoff with plenty ofwater immedi-
ately.
JVM0422X
*
A
LHD models
*
B
RHD models
Check thefluid level inthe reservoir. Ifthe fluid is
below theMIN line
*
2
, add fluid uptothe MAX line
*
1
. (See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) forthe recommended typesoffluid.)
If the fluid must beadded frequently ,the clutch system
should bethoroughly checkedbyaNISSAN dealer.
T32A1308 27-A09B908 5-A503-4BD2-90B6- A9712DBC4 699
Contact aNISSAN dealerifchecking orreplacement
is required.
CAUTION:
. Use only Genuine NISSANCVTFluid NS-3.
Do not mix with other fluids.
. Using transmission fluidother thanGenuine
NISSAN CVTFluid NS-3willdamage the
CVT ,which isnot covered bythe warranty.
T32A130 827-D2355 B7A-043F-4 BB2-9663-01336EF EC28F
JVM0378X
WARNING:
Operating theengine withtheaircleaner filter
off can cause youorothers tobe burned. Theair
cleaner filternotonly cleans theintake air,it
also stops flame ifthe engine backfires. Ifthe air
cleaner filterisnot installed andtheengine
backfires, youcould beburned. Neverdrivewith
the aircleaner filteroff.Becautious workingon
the engine whentheaircleaner filterisoff.
T o remove thefilter, unlatch theretaining clips
*
1
, and
pull thecover
*
2
upward.
The viscous papertypefilterelement shouldnotbe
cleaned andreused. Thedrypaper typefilterelement
may becleaned andreused. Replace theairfilter
according tothe maintenance logshown inaseparate
maintenance booklet.
When replacing theairfilter, wipetheinside ofthe air
cleaner housing andthecover withadamp cloth.
Maintenance anddo-it-yours elf
8-17
CLUT
CHFLUID (ifequipped) CONTINUOUSL
YVARIABLE
TRANSMISSIO N(CVT) FLUID (if
equipped) AIR
CLEANER FILTER
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Replacing
T32A1308 27-42DE41B1 -2781-4C58-9227-157AE 89E65EF
SDI2359
Replace thewiper blades ifthey areworn.
Before replacing thewiper blades, thewiper should be
in the fully upposition toavoid scratching theengine
hood ordamaging thewiper arm.To pull upthe wiper
arm, seeªWiper andwasher switchº (P.2-47) .
1. Liftthe wiper armaway fromthewindshield.
2. Push andhold therelease tab
*
A
, and then move
the wiper blade downthewiper armtoremove
*
1
.
3. Remove thewiper blade.
4. Insert thenew wiper blade ontothewiper armuntil
it clicks intoplace.
CAUTION:
. After wiper blade replacement, returnthe
wiper armtoits original position. Otherwise
the wiper armorthe engine hoodmaybe
scratched andmay cause damage whenthe
engine hoodisopened.
. Worn wiper blades candamage thewind-
shield andimpair drivervision.
REAR WINDOW WIPERBLADE
T32A130 827-CB9D8 342-2180-4FFF-9BDC-C F4DC13E7621
Contact aNISSAN dealerifchecking orreplacement
is required.
T32A1308 27-B990E0 BD-E958-4300-AFB5-D A449BD53 928
JVM0380X
WARNING:
Anti-freeze ispoisonous andshould bestored
carefully inmarked containers outofthe reach
of children.
T o check thefluid level, useyour finger toplug the
center hole
*
1
of the cap/tube assembly,then remove
it from thereservoir.
If there isno fluid inthe tube, addfluid.
Add awasher solventtothe water forbetter cleaning.
In the winter season, addawindshield washeranti-
freeze. Followthemanufacturer's instructionsforthe
mixture ratio.
Maintenance anddo-it-yours elf
8-19
WINDOW
WASHERFLUID
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
.
Make surethatthe+side faces thebottom of
the case.
SDI2452
4. Align thetips ofthe upper andlower parts
*
1
,
and then push them together untilitis securely
closed
*
2
.
5. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation issubject
tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
T32A1308 27-124166 77-0A48-4E6 6-B067-4EB7 C158E2E4
The variable voltagecontrolsystem measures the
amount ofelectrical discharge fromthebattery and
controls voltagegenerated bythe alternator.
CAUTION:
. Do not ground accessories directlytothe
battery terminal. Doingsowill bypass the
variable voltagecontrolsystemandthe
vehicle battery maynotcharge completely.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery.
Maintenance anddo-it-yours elf
8-23
V
ARIABLE VOLTAGE CONTROL
S Y STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD