2011 NISSAN X-TRAIL instrument panel


> (GLW    0RGHO 7$@
3-18
Pre-driving checksandadjustments
Locking doors
GUID-59 C48714-709 2-416E-964F-87ABE0DE37CD
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº button
*
A
on the Intelligent
K ey .
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-02 C4F53F-111 C-4240-90DA-B021C839 0A59
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº button
*
B
. The door unlock modecanbe
switched tothe selective doorunlock mode(if
equipped) .
T o change thedoor unlock modefromonetoanother,
see ªVehicle information displayº(P.2-20) .
All door unlock mode:
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey .
2. Alldoors (including theback door) willbe
unlocked.
Selective doorunlock mode(ifequipped):
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey . 2.
The driver's doorwillbeunlocked.
3. Push theªUNL OCKº button
*
B
on the Intelligent
K ey again.
4. Alldoors (including theback door) willbe
unlocked.
Automatic relock:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº button
*
B
on
the Intelligent Key while thedoors arelocked. Ifduring
this 30seconds or1minute timeperiod, the
ªUNL OCKº button
*
B
on the Intelligent Key is
pushed, alldoors willbelocked automatically after
another 30seconds or1minute.
. Opening anydoor orback door.
. Pushing theignition switch.
Opening orclosing backdoor(ifequipped)
GUID-7A97 DFB7-E05B -4600-BFF6 -A75E59407 982
Opening:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoor button
*
C
for
more than1second.
2. The back doorwillautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
Closing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoorbutton
*
C
.
2. The back doorwillautomatically close.
The hazard indicator flashes4times andtheoutside
chime sounds.
If the button
*
C
is pushed whiletheback door
is being opened orclosed, theback doorwillreverse.
Using panicalarm(ifequipped)
GUID-493 7A23C-01 2A-422A-B E61-A0FEA 679E405
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
D
on the
Intelligent Key for more than1second.
2. The theft warning alarmandheadlights (if
equipped) willstay onfor 25 seconds.
3. The panic alarmstops when:
.
It has runfor25 seconds, or
.
Any ofthe buttons onthe Intelligent Key are
pushed. (Note:Panicbutton should bepushed
for more than1second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81 C103B-F4 9C-4165-99 66-43D3288AC0B0
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andthehorn or
the outside chimewillsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OPENING HOOD
T32A1308 27-335B9F3 6-A2B6-4F60-8C88-243 636A15C7A
JVP0288X
1. Pull thehood lockrelease handle
*
1
located
below theinstrument paneluntilthehood springs
up.
2. Locate thelever
*
2
in between thehood and
grille, andpush thelever sideways withyour
fingertips.
3. Raise thehood.
4. Remove thesupport rodand insert itinto theslot
*
3
.
Hold thecoated parts
*
A
when removing or
resetting thesupport rod.Avoid directcontact
with themetal parts, asthey maybehot
immediately aftertheengine hasbeen stopped.
CL OSING HOOD
T32A130827- 25073346-5A1D-4F8E-8 B28-82B4A41B9CC7
1. While supporting thehood, return thesupport rod
to its original position.
2. Slowly lowerthehood toabout 20to30 cm (8to
12 in)above thehood lock,thenletitdrop.
3. Make sureitis securely latched.
T32A130827- 405C1781-AE 61-4D43-A40E-A626866CFB76
WARNING:
. Always besure theback doorhasbeen
closed securely toprevent itfrom opening
while driving.
. Donot drive withtheback dooropen. This
could allowdangerous exhaustgasestobe
drawn intothevehicle. SeeªPrecautions
when starting anddrivingº (P.5-3) forex-
haust gas.
. Donot leave children unattended insidethe
vehicle. Theycould unknowingly activate
switches orcontrols. Unattended children
could become involved inserious accidents.
. Always besure thathands andfeet areclear
of the door frame toavoid injury while
closing theback door.
OPERA TINGMANUAL BACKDOOR
GUID-3A35 60E3-6F46-4 D3E-8487-69C8562C7AD 6
JVP0281X
T o open theback door, unlock itand push theopener
switch
*
A
. Pull upthe back doortoopen.
The back doorcanbeunlocked by:
Pre-driving checksandadjustments
3-23
BACK
DOOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-24
Pre-driving checksandadjustments
. pushing theªUNL OCKº
button onthe key.
. pushing theback doorrequest switch(if
equipped) .
. pushing thedoor handle request switch(if
equipped) .
. pushing thepower doorlockswitch tothe unlock
position.
T o close theback door, pulldown untilitsecurely
locks.
OPERA TINGPOWER BACKDOOR (if
equipped)
GUID-436541 C3-01DD-453A-AEA7-12BEFABBEB19
T o operate thepower backdoor, theshift lever must be
in the P(Park) position.
The power backdoorwillnotoperate ifthe battery
voltage islow .
P ower backdoormain switch
GUID-1E87 F67F-2B4F-4 F44-B5FB-976E0AD39F 92
JVP0282X
T ype A
*
1
P ower open (hands-free operation)
*
2
P ower open/close (switchoperation)
*
3
Manual operation
JVP0309X
T ype B
*
1
P ower open/close (switchoperation)
*
2
Manual operation
The power backdooroperation canbeturned onoroff
with thepower backdoormain switch onthe
instrument panel.
When thepower doormain switch ispushed tothe
ªOFFº position
*
3
(T ype A)or
*
2
(T ype B),power
operation isavailable byusing thepower backdoor
button onthe Intelligent Key .
P ower open (switch operation)
GUID-FEE A27BB-7EA9-4 260-927A-54954CB04 325
JVP0290X
Power backdoorswitch ÐInstrument panel
JVP0283X
Back dooropener switch
SP A2562
Power backdoorbutton - Key
JVP0285X
Power backdoorswitch ÐBack door
When theback doorisfully closed, theback doorwill
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
fully open automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panelformore than1second
. pushing theback dooropener switch
*
B
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
NO TE:
The back doorcanbeopened bythe power back
door switch
*
A
or the power backdoorbutton
*
C
even ifthe back doorislocked. The
back doorcanbeunlocked andopened inde-
pendently ofthe other doors, evenwhen theyare
locked.
P ower open (hands-free operation)
GUID-961B2 5EC-1E8A-4E34-B404-F0 E5F836460B
JVP0286X
When theback doorisfully closed, theback doorwill
fully open automatically byhands-free operation.
1. Carry theIntelligent Key .
2. Put your hand orluggage nearthehands-free
sensor
*
E
, as illustrated, forabout 1second. 3.
Theback doorwillunlock andautomatically open.
The back doorwillopen regardless ofthe lock status.
The hands-free sensorwillnotfunction underthe
following conditions:
. When theIntelligent Key isnot carried withyou.
. When theback doorisopen.
. When automatic operationofthe back dooris
being performed.
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
JVP0302X
NO TE:
. The back doorcannot beclosed automati-
cally byusing thehands-free sensor
*
E
.
. All doors willlock while thehands-free
sensor isbeing used.
. Ifdirt attaches tothe surface ofthe hands-
free sensor, thesensor maynotfunction.
Wipe thesensor usingaclean cloth.
. Ifwater issplashed tothe area around the
hands-free sensor,itmay cause amalfunc-
tion. .
The operating range
*
F
of the hands-free
sensor iswithin 80mm (3.1in)ofthe center
of the sensor.
CAUTION:
. The back doormayopen evenifsomething
other thanyourhand orluggage entersthe
operating rangeofthe hands-free sensor
when theIntelligent Keyiscarried withyou.
. Even ifthe Intelligent Keyiscarried withyou,
the back doorcannot beopened when
something suchasleather glovesabsorb
the light isput tothe hands-free sensor.
. The back doormaynotopen, ifthe head-
lights, sunlight oranother lightsource
shines directly onthe sensor, oran acces-
sory such asaframe isattached tothe
license plate,evenifyour hand orluggage
enters theoperating rangeofthe hands-free
sensor whentheIntelligent Keyiscarried
with you.
. When washing, waxingormaintaining your
vehicle, placingorreplacing thebody cover,
or splashing watertothe area around the
hands-free sensor,placethepower back
door main switch tothe
*
2
position or
*
3
position.
. The hands-free sensordetects objects by
infrared light.Never movethesensor. Ifthe
location ofthe sensor, angleofthe sensor or
direction oflight irradiation change,itmay
lead tonon-operation, incorrectdetection or
other operating malfunctions.
. Ifthe automatic open/close operationis
performed consecutively, thesafety mode
activates andtheoperation cannotbeper-
Pre-driving checksandadjustments
3-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-26
Pre-driving checksandadjustments
formed foracertain periodoftime. Inthis
case, waitforawhile andthen perform the
operation.
P ower close
GUID-CC B3E1AA-F7F C-4580-824E-AE894FFC0FC5
When theback doorisfully opened, theback doorwill
fully close automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts closing.
Reverse function
GUID-E38 E5684-FF75 -4567-AC95-7492FB18 146B
The power backdoorwillreverse immediately ifone of
the following actionsisperformed duringpoweropen
or power close.
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the key.
The outside chimesounds whentheback doorstarts
to reverse.
Auto reverse function
GUID-98CB 1259-07F7-4 E7C-9EB2-D4EF10F4 F969
The auto-reverse functionenablestheback doorto
automatically reversewhensomething iscaught inthe
back doorasitis opening orclosing. Whenthecontrol
unit detects anobstacle, theback doorwillreverse and
return tothe fullopen orfull close position.
If asecond obstacle isdetected, theback doormotion
will stop. Theback doorwillenter themanual mode.
A pinch sensor ismounted oneach sideofthe back
door. Ifan obstacle isdetected bythe pinch sensor
during powerclose,theback doorwillreverse and
return tothe fullopen position immediately .
NO TE:
If the pinch sensor isdamaged orremoved, the
power closefunction willnotoperate.
WARNING:
There isasmall distance immediately beforethe
closed position thatcannot bedetected. Make
sure thatallpassengers keeptheirhands, etc.,
clear fromtheback dooropening beforeclosing
the back door.
Manual mode
GUID-FD58C3 34-881E-4F97-9CD8-8548D2267CDB
If power operation isnot available, theback doorcan
be operated manually.Power operation maynotbe
available ifmultiple obstacles havebeen detected ina
single power cycleorifthe battery voltage islow .
When thepower backdoormain switch isin the OFF
position, theback doorcanbeopened manually by
pushing theback dooropener switch.Ifthe power
back dooropener switchispushed duringpoweropen
or close, thepower operation willbecanceled andthe
back doorcanbeoperated manually.
AUT OCL OSURE (ifequipped)
GUID-5E1 D548E-B20 5-4D0F-BE11-4BC09 228D416
If the back doorispulled downtoapartly open
position, theback doorwillpull itself tothe closed
position.
Do not apply excessive forcewhen theauto
closure isoperating. Excessiveforceapplied
may cause themechanism tomalfunction.
CAUTION:
. The back doorwillautomatically closefrom
a partly openposition. To avoid pinching,
keep hands andfingers awayfromback
door opening.
. Donot letchildren operatetheback door.
BACK DOOR RELEASE LEVER
GUID-4A1 D87BC-BEAC-4 21F-8B76-F15FD5B474 D5
JVP0280X
If the back doorcannot beopened withthepower door
lock switch duetoadischarged battery,follow these
steps.
1. Fold therear seats down. SeeªSeatsº (P.1-2) .
2. Insert asuitable toolinthe access opening. Move
the release levertothe right. Theback doorwillbe
unlatched.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
For models withStop/Start SystemorIdling
Stop System:
While theengine isstopped bythe Stop/Start System
or the Idling StopSystem, switching theairflow tothe
front defogger willcause theengine toautomatically
restart.
While theengine isrunning, selecting airflowtothe
front defogger willprevent theStop/Start Systemor
Idling StopSystem fromautomatically stoppingthe
engine.
When theengine isstopped bythe Stop/Start System
or Idling StopSystem, heaterandairconditioner
performance maybereduced. To keep fullheater and
air conditioner performance, restarttheengine by
pushing theStop/Start SystemOFFswitch orthe
Idling StopSystem OFFswitch, orby placing the
ignition switchinthe ªONº position. Formore details
see ªStop/Start SystemorIdling StopSystemº (P.5-
18) .
OPERA TINGTIPS(forautomatic aircondi-
tioner)
T32A1308 27-94E48E 8C-CACC-4 A8C-8478-31C 17097E10D
JVH0727X
JVH0728X
When theengine coolant temperature andoutside air
temperature arelow,the airflow from thefoot outlets
may notoperate. However, thisisnot amalfunction.
After thecoolant temperature warmsup,the airflow
from thefoot outlets willoperate normally.
The sensors
*
1
and
*
2
, located onthe instrument
panel, helpmaintain aconstant temperature. Donot
put anything onoraround thesensors.
Display screen,heaterandairconditioner ,and audio system
4-27
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-50
Display screen,heaterandaircondition er,and audio system
USB device playeroperation
GUID-DA76 FC84-95B5-4B F4-8C53-9F7FC9D6F088
USB device mainoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The USB portislocated onthe lower partofthe
instrument panel.SeeªUSB (Universal SerialBus)
connection portº(P.4-75) .Connect aUSB memory
device intotheconnector. TheUSB memory device
will beactivated automatically .
Refer toyour device manufacturer's ownerinformation
regarding theproper useand care ofthe device.
If the system hasbeen turned offwhile theUSB
memory devicewasplaying, pushing thePower/VOL
dial willstart theUSB memory device.
The following operations areidentical tothe audio main
operation ofthe Compact Disc(CD) operation. For
details, seeªCD player operationº (P.4-48) .
. Listview
. Quick search
.
(Seek/track)
. MIX (Random play)
. RPT (Repeat track)
. Folder browsing
MEDIA button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o operate theUSB memory device,pushtheMEDIA
button repeatedly untiltheUSB mode isselected.
DISP button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
While atrack withrecorded musicinformation tags
(ID3-tags) isbeing played, thetitle ofthe played track
is displayed.
When theDISP button ispushed repeatedly ,further
information aboutthetrack canbedisplayed along
with thetrack titleasfollows: T
rack time?Artist ?Album ?Track time
T rack details:
Pushing andholding theDISP button willturn the
display intoadetailed overview.Push theBack button
to return tothe display forthe main display mode.
iP od player operation
GUID-9E2 C8C45-6E D0-427E-81 FE-F6FCE10 DE823
Connecting iPod:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The USB portislocated onthe lower partofthe
instrument panel.SeeªUSB (Universal SerialBus)
connection portº(P.4-75) .
When theiPod isconnected tothe vehicle, theiPod
music library canonly beoperated bythe vehicle audio
controls.
* iPod and iPhone areatrademark ofApple Inc.,
registered inthe U.S. andother countries.
Compatibility:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The system unitshall becompatible withalldevices
(past andfuture) supporting AppleAccessory Protocol
on USB link.
It includes (andnotlimited to):
. iPod Generation 5devices
. iPod Classic Iand II(Generation 6and 7)
. iTouch Generation OS1,2,3,4and next
. iPhone Generation OS1,2, 3, 4and next
. iPod Nano (1G,2G,3G)
. iPad 1,2and 3
NO TE:
This audio system donot support iPadcharging.
MEDIA button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o operate theiPod, push theMEDIA buttonrepeat-
edly until theUSB (iPod) mode isselected andthen
push theMENU/ENTER dial.
iPod main operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Interface:
The interface foriPod operation shownonthe audio
system displayissimilar tothe iPod interface. Usethe
MENU/ENTER dialtoplay atrack onthe iPod.
The following itemscanbechosen fromthemenu list
screen.
. Playlists
. Artists
. Albums
. Tracks
. More
For further information abouteachitem,seetheiPod
owner's manual.
The following operations areidentical tothe audio main
operation ofthe Compact Disc(CD) operation. For
details, seeªCD player operationº (P.4-48) .
. Listview
. Quick search
.
(Seek/track)
. MIX (Random play)
. RPT (Repeat track)
. Folder browsing
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
List view:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
While thetrack isbeing played, pushtheMENU/
ENTER dialtodisplay theavailable tracksinalisted
view mode. To select atrack fromthelist, oratrack to
start listening to,turn theMENU/ENTER dialthen push
MENU/ENTER dial.
Quick search:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
In the listview mode, aquick search canbeperformed
to find atrack fromthelist. Push theA-Zbutton, turn
the MENU/ENTER dialtothe first alphabetic letterof
the song titleand then push theMENU/ENTER dial.
When found, alist ofthe available songswillbe
displayed. Select,andpush theMENU/ENTER dialto
play thepreferred track.
Seek/track button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push andhold theSeek/track buttontofast forward or
rewind through thetrack. When thebutton isreleased,
the track willplay atnormal playing speed.
T rack up/down:
Pushing theSeek/track buttononce,thetrack willskip
forward tothe next track orbackward tothe beginning
of the current track.PushtheSeek/track buttonmore
than once toskip through thetracks.
Folder browsing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the recorded mediacontains folderswithmusic files,
pushing theSeek/track buttonwillplay insequence
the tracks ofeach folder.
T o select apreferred folder:
1. Push theMENU/ENTER dialorthe Back button
and alist oftracks inthe current folderis
displayed. 2.
Push theBack button.
3. Turn theMENU/ENTER dialforthe preferred
folder.
4. Push theMENU/ENTER dialtoaccess thefolder.
Push theMENU/ENTER dialagain tostart playing
the first track orturn theMENU/ENTER dial,and
push theMENU/ENTER dialtoselect another
track.
If the current selected foldercontains subfolders, push
the MENU/ENTER dial,anew screen withalist ofsub
folders willbedisplayed. Turn theMENU/ENTER dial
for the sub folder thenpush theMENU/ENTER dialto
select. Selecttheroot folder itemwhen songs are
recorded additionally inthe root folder.
T o return tothe previous folderscreen, pushtheBack
button.
RPT button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theRPT button andthecurrent trackwillbe
played continuously .
MIX button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theMIX button andallthe tracks willbeplayed in
a random order.
DISP button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
While aCD with recorded musicinformation tags(CD-
text/ID3-text tags)isbeing played, thetitle ofthe
played trackisdisplayed whenavailable.
When theDISP button ispushed repeatedly ,further
information aboutthetrack canbedisplayed along
with thetrack titleasfollows: T
rack time?Artist ?Album ?Track time
T rack details:
Pushing andholding theDISP button willturn the
display intoadetailed overview.Push theBack button
to return tothe previous screen.
CD eject button:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theCD eject button ispushed whiletheignition
switch isplaced inthe ªONº orªACCº position, theCD
will beejected.
If aCD isejected bypushing theCD eject button, and
it is not taken outfrom theloading slotwithin 20
seconds, theCD willautomatically bereloaded tothe
slot toprotect theCD.
USB device playeroperation
GUID-02F A512F-947 F-443E-9A0 7-73B7A3338822
USB device mainoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The USB outlet connector islocated onthe lower part
of the instrument panel.SeeªUSB (Universal Serial
Bus) connection portº(P.4-75) .Connect aUSB
memory deviceintotheconnector. TheUSB memory
device willbeactivated automatically .
Refer toyour device manufacturer's ownerinformation
regarding theproper useand care ofthe device.
If the system hasbeen turned offwhile theUSB
memory devicewasplaying, pushing thePower/VOL
dial willstart theUSB memory device.
The following operations areidentical tothe audio main
operation ofthe Compact Disc(CD) operation. For
details, seeªCD player operationº (P.4-54) .
. Listview
. Quick search
.
(Seek/track)
Display screen,heaterandairconditioner ,and audio system
4-55
&RQGLWLRQ
([FHSWIRU&KLQD