2011 NISSAN FRONTIER warning

[x] Cancel search: warning

Page 310 of 377

NISSAN FRONTIER 2011  Owner´s Manual If you wax the surface of the hood, be careful not
to let wax get into the windshield washer nozzle
A. This may cause clogging or improper wind-
shield washer operation. If wax gets into the
nozzle,

Page 319 of 377

NISSAN FRONTIER 2011  Owner´s Manual If you have a flat tire, see “Flat tire” in the
“In case of emergency” section of this
manual.
TIRE PRESSURE
Tire Pressure Monitoring System
(TPMS)
This vehicle is equipped with the Tire
Press

Page 320 of 377

NISSAN FRONTIER 2011  Owner´s Manual Tire inflation pressure
Check the tire pressures (including the
spare) often and always prior to long dis-
tance trips. The recommended tire pres-
sure specifications are shown on the
F.M.V.S.S./C.M.V

Page 325 of 377

NISSAN FRONTIER 2011  Owner´s Manual 7The word “radial”
The word “radial” is shown if the tire has
radial structure.
8Manufacturer or brand name
Manufacturer or brand name is shown.
Other Tire-related Terminology
In addition to

Page 327 of 377

NISSAN FRONTIER 2011  Owner´s Manual Wheel nut tightening torque:98 ft-lb (133 N·m)
The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire rot

Page 328 of 377

NISSAN FRONTIER 2011  Owner´s Manual Replacing wheels and tires
When replacing a tire, use the same size, tread
design, speed rating and load carrying capacity
as originally equipped. Recommended types and
sizes are shown in “Wheels an

Page 329 of 377

NISSAN FRONTIER 2011  Owner´s Manual Wheel balance
Unbalanced wheels may affect vehicle handling
and tire life. Even with regular use, wheels can get
out of balance. Therefore, they should be bal-
anced as required.
Wheel balance service

Page 342 of 377

NISSAN FRONTIER 2011  Owner´s Manual INSTALLING FRONT LICENSE
PLATE WITH GROMMETS
Use the following steps to mount the front license
plate with grommets:1. Make holes on the plastic finisher at the location mark (small dimple) using a 0.