2011 MITSUBISHI OUTLANDER XL headlight bulb

[x] Cancel search: headlight bulb

Page 321 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 3-206 Features and controls
3Indicators
N00519900127
Turn signal indicators/Hazard warning lights
N00520000216
The arrows will flash in time with the corresponding exterior
turn signals when the turn

Page 649 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-52 Vehicle care and maintenance
7
[For vehicles without high intensity discharge headlights]
  [For vehicles equipped with high intensity discharge head-
lights]
  
Description
Wa t t a g e
ANSI Tra

Page 650 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-53
7
NOTEThe side turn signal light (on outside rearview mirror) use
an LED instead of the bulb. Check with an authorized
Mitsubishi Motors dealer or repair facility of

Page 652 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-55
7
Headlights (low beam, except for vehicles 
equipped with high intensity discharge head-
lights)
N00901800033
1. When replacing the bulb on the driver’s side (3.0

Page 653 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-56 Vehicle care and maintenance
7
3. While holding down the tab (C), pull out the socket (D).
4. To install the bulb, perform the removal steps in reverse.
CAUTION
!Handle halogen light bulb with c

Page 654 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-57
7
Headlights (high beam, except for vehicles 
equipped with high intensity discharge head-
lights)
N00901900034
1. Turn the cap (A) counterclockwise to remove it.2. T

Page 655 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-58 Vehicle care and maintenance
7
3. While holding down the tab (C), pull out the socket (D). 4. To install the bulb, perform the removal steps in reverse.
CAUTION
!Handle halogen light bulb with c

Page 657 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-60 Vehicle care and maintenance
7
3. Turn the bulb counterclockwise while pressing it and pull
it out of the socket.
4. To install the bulb, perform the removal steps in reverse.
Headlights (low/hig
Page:   1-8 9-16 next >