2011 MITSUBISHI LANCER RALLIART Time

[x] Cancel search: Time

Page 529 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual 5-130 Comfort controls
5
To listen to tracks from a device connected via 
Bluetooth
®
N00765500034
1. Press the PWR button (2) to turn on the audio system. The
system turns on in the last mode used.

Page 530 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual Comfort controls
5-131
5
To play tracks in random order (if supported by the 
device)
N00766000010
Press the RDM button (6) to show “RDM” in the display.
The system randomly selects and plays trac

Page 533 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual 5-134 Comfort controls
5Steering wheel audio remote control switch
 
(if so equipped)
N00714800426
The remote control switch is located on the left side of the
steering wheel.
The switch can be operat

Page 539 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual 5-140 Comfort controls
5
NOTEReception may not be possible in a place where the signal is interrupted by a tunnel, by the roof of a garage or other structure,
by woods, or by a tall building. At such

Page 545 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual 5-146 Comfort controls
5
In the following circumstances, moisture can form on
discs and inside the audio system, preventing normal
operation.
• When there is high humidity (for example, when it is

Page 546 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual Comfort controls
5-147
5
Do not put additional labels (A) or stickers (B) on com-
pact discs. Also, do not use any compact disc on which a
label or sticker has started to peel off or any compact disc

Page 548 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual Comfort controls
5-149
5
To  r e m o v eTurn the pole (A) counterclockwise.To  i n s t a l lScrew the pole (A) clockwise into the base (B) until it is
securely retained.NOTEBe sure to remove the roof

Page 549 of 700

MITSUBISHI LANCER RALLIART 2011 8.G Owners Manual 5-150 Comfort controls
5
3. When the time is set, press the DISP button to stop the
clock display from flashing. After time signal setting,
however, the clock display automatically stops flashing.NOTE