2011 MITSUBISHI LANCER lights

[x] Cancel search: lights

Page 643 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual 7-66 Vehicle care and maintenance
7
4. Turn the bulb counterclockwise while pressing it and pull
it out of the socket.
5. To install a bulb, perform the removal steps in reverse.
Headlights (low/high

Page 644 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual Vehicle care and maintenance
7-67
7
Parking and side-marker lights (except for vehi-
cles with high intensity discharge headlights)
N00917300512
1. For vehicles equipped with turbocharger, when replac

Page 646 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual Vehicle care and maintenance
7-69
7
Parking and side-marker lights (for vehicles with 
high intensity discharge headlights)
N00917300509
1. To create enough work space, turn the steering wheel all
the

Page 648 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual Vehicle care and maintenance
7-71
7
Front turn signal lights
N00943400237
1. Remove the clips (A) and clips (B), then remove the duct
(C) and the upper cover (D).Except for vehicles with turbocharger

Page 650 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual Vehicle care and maintenance
7-73
7
Front fog lights (except for vehicles with turbo-
charger)
 (if so equipped)
N00943600705
1. Remove the screw (A) and pull the cover out.2. Remove the screws (B) an

Page 653 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual 7-76 Vehicle care and maintenance
7
Front fog lights (for vehicles with turbocharger)
N00943600718
1. Remove the screw (A).
CAUTION
!Handle halogen light bulbs with care. The gas inside
a halogen lig

Page 657 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual 7-80 Vehicle care and maintenance
7
Rear combination lights
N00943700386
Tail and stop lights, rear turn signal lights and rear 
side-marker lights1. Remove the screws (A) from the light unit.
CAUTION

Page 660 of 700

MITSUBISHI LANCER 2011 8.G Owners Manual Vehicle care and maintenance
7-83
7
Tail lights and back-up lights1. Open the trunk lid.
Remove the clips (A) and remove the cover (B).2. Remove the socket and bulb assemblies by turning them
counterc