2011 MERCEDES-BENZ SPRINTER MY 11 Audio Manual

23
CD mode
Vehicle equipment
General information
CD mode

General information
24
CD mode
+This Operator’s Manual describes all fea-
tures, standard or optional, potentially
available for your vehicle at the time of pur-
chase. Please be aware that your vehicle
might not be equipped with all features de-
scribed in this manual.
+Explanation of terminology:
The terms "track" and "file" are used in
this manual to describe a single piece of
music on a CD. "Track" refers to pieces of
music on audio CDs or on MP3 / WMA
CDs. "File" is used for MP3 / WMA CDs
only.
The term "folder" is used to describe file
directories on MP3 / WMA CDs which
contain MP3 / WMA tracks.
+In some cases, the Sound 5 radio may not
be able to play audio CDs with copy protec-
tion.
There may be playback problems when play-
ing copied CDs.
+There are a large variety of discs, disc-
writing software and writers available. This
variety means that there is no guarantee
that the Sound 5 radio will be able to play
discs that you have copied yourself.
There may be playback problems if you play
CDs that you have copied yourself with a
storage capacity of more than 700 MB. CDs
of this type do not conform to currently appli-
cable standards. ! Do not affix stickers or labels to the
discs. They could peel off and damage
the drive. Such damage is not covered by
the New Vehicle Limited Warranty.
! The drive is designed to hold discs which
comply with the EN 60908 standard.
Therefore, you can only use discs with a
maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and they can damage
the CD drive.
Do not use discs with a diameter of 8 cm,
even with an adapter, as this can damage
the drive. Such damage is not covered by
the New Vehicle Limited Warranty.
Only use round discs with a diameter of
12 cm.
Vehicle equipment
General information
$ Risk of injury
The CD drive is a class 1 laser product. There
is a risk of exposure to invisible laser radia-
tion if you open the casing or if the casing is
faulty or damaged.
Do not open the casing. The unit contains no
parts on which you can carry out mainte-
nance. For safety reasons, have any neces-
sary maintenance work carried out by
qualified aftersales technicians only.
$ Risk of accident
In order to avoid distraction which could lead
to an accident, the driver should insert or
eject CDs with the vehicle at a standstill and
operate the Sound 5 radio only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.

General information25
CD mode
The following points should be taken into ac-
count when using MP3 and WMA CDs: Only MP3 / WMA files (tracks) that have
been written on a CD using ISO 9660 /
Joliet file system can be played by the
system.
In particular, read errors may occasional-
ly occur with discs you have copied your-
self, even if the disc can generally be read
correctly.
Display of album and track name is limit-
ed to a maximum of 31 characters (de-
pending on which character set is used).
This equipment can play both write-once
CDs (CD-R) and rewriteable CDs (CD-
RW).
Multisession CDs should be finalized to
prevent playback problems.
Multi-session CDs containing both audio
tracks and MP3 / WMA tracks (mixed
mode) are handled according to what is
contained in the first session. If the first
session contains audio tracks, the CD is
treated as an audio CD. In such cases,
any data stored in the second session
cannot be played. Accordingly, only
MP3 / WMA tracks may be played back if
this is what is contained in the first ses-
sion.
The maximum number of folders per CD
is 255. The maximum total number of
folders and tracks (files) on a CD is 999.
When moving between folders and
tracks, these are displayed and selected
linearly. Any existing hierarchical (nest-
ed) folder structure is handled as a linear
sequence.
Information regarding MP3 files To display the track and album name, you
need to add the corresponding data (ID3
tags) to the MP3 file before writing the
CD.
We recommend a constant bit rate of at
least 160 kbit / sec for the compression
of MP3 data. With variable bit rates, the
display of the elapsed playback time may
differ from the time actually elapsed.
The file extension for MP3 files must be
"mp3" and must be separated from the
file name by a period. If any other file ex-
tension is used, this will not be recog-
nized by the equipment.
Information regarding WMA files To display the track and album name, you
need to add the corresponding metadata
to the WMA file.
The file extension for WMA files must be
"wma" and must be separated from the
file name by a period. If any other file ex-
tension is used, this will not be recog-
nized by the equipment.
+A number of factors influence whether or
not a WMA file can be played, including:
sampling rate
bit rate
encoding process
software used for the creation of the
WMA files
writing software
other settings (e.g. copy protection,
Digital Rights Management, ad-
vanced audio format settings)
To create WMA files, use only current stan-
dard software, a sampling rate of 44.1 kHz
and bit rates between 16 and 320 kbit / s. Do
not use other settings, such as lossless cod-
ing, surround sound, DRM, copy protection,
etc.
Do not use compilations that contain WMA
files with other settings as this may render
the CD unplayable even if only some files on
the CD do not fulfill the required standards.
Notes on MP3 / WMA operation

CD mode
26
CD mode
Handle discs carefully to prevent play-
back problems.
Avoid getting scratches, fingerprints and
dust on discs.
Do not affix stickers to the discs.
To label discs, only use a pen designed
for this purpose.
Clean discs from time to time with a con-
ventional cleaning cloth. Do not wipe
them with a circular motion, but only in
straight lines from the center outwards.
Place discs back in their cases after use.
Protect discs from heat and direct sun-
light.
Insert a CD.
or Press the & button.
+In some cases, the system may not be
able to play audio CDs with copy protec-
tion.
Insert the CD into the disc slot with the
printed side upwards.
The CD is drawn automatically into the
slot, and playback of the first track starts.
+If you insert the CD into the slot when the
unit is switched off, the device will auto-
matically switch on.
The length of time required to read the data (
LOADING) depends on various factors (type
of media, number of titles, whether copy-pro-
tected, etc.) and may take longer in some
cases.
Display with audio CD:
Display with MP3 / WMA CD:
Initially, the title number is displayed briefly.
Then, the first ten characters of the track
name are shown.
+To display the full track name, press the
= button. The track name only appears
if it was added when the CD was created
(ID3 tags / metadata). Otherwise, only the
file name will be shown.
Notes on handling discs
CD mode
Switching to CD mode
Inserting a CD
$ Risk of accident
In order to avoid distraction which could lead
to an accident, the driver should insert or
eject CDs with the vehicle at a standstill and
operate the Sound 5 radio only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.

CD mode27
CD mode
Press the 8 button.
The CD is ejected.
Take the CD out of the slot.
If the CD is not removed from the disc
slot within 10 seconds, the drive draws in
the CD again for safety reasons.
Switching to CD mode Press the & button once or twice.
CD playback begins at the point last lis-
tened to.
If no CD is inserted, the
NO CD message ap-
pears for a short time.
The device jumps to the last sound source
played.
Skipping forwards / backwards
Operation of this function is identical for au-
dio CDs and MP3 / WMA CDs. Skip forwards:
The next track is played.
Skip back:
The current track restarts if it has been
playing for longer than approximately
10 seconds. If it has been playing for less
time, the previous track is played.
Skipping tracks using the controls on the
Sound 5 radio
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press the ü button to skip forward.
You will hear the next track.
or Press the û button to skip back.
You hear the previous track or the start of
the current track again.
Skipping tracks using the steering wheel
buttons
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Switch the display in the instrument clus-
ter to the audio display ( page 17).
Press the & button to skip forward.
You hear the next track.
or Press the * button to skip back.
You hear the previous track.
Audible fast forward / fast rewind
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press and hold the ü button for fast
forward.
or Press and hold the û button for fast
rewind.Ejecting the CD
$ Risk of accident
In order to avoid distraction which could lead
to an accident, the driver should insert or
eject CDs with the vehicle at a standstill and
operate the Sound 5 radio only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.
CD playback

CD mode
28
CD mode
Display with audio CD inserted:
Display with MP3 / WMA CD inserted:
After the button is released, playback is con-
tinued at the current position. The remaining
playback time for the current track is dis-
played for a further 8 seconds.
Scan mode
Scan mode plays each track on the current
CD for approximately 10 seconds.
It ends automatically at the track you were
listening to before you started the scan. You
can also end the scan manually.
Operation of this function is identical for au-
dio CDs and MP3 / WMA CDs.
Starting scan mode
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press the SC button during CD playback.
With audio CD inserted:
Display with MP3 / WMA CD inserted: The track number chosen is displayed.
Ending scan mode
Press the SC button.
The track you are currently listening to
remains set.
This function is only available for MP3 / WMA
CDs.
In CD mode with MP3 / WMA CD inserted:
Press the n button to skip forward.
or Press the ý button to skip back.
The next or previous folder is selected.
Each time the folder is changed, the first ten
letters of the folder name briefly appear on
the display:
+To display the entire folder name, press
button =.
If a folder contains no WMA or MP3 tracks,
that folder is not displayed.
Once selection of a folder is complete, the
display switches back to the track name.
When moving between folders and tracks,
these are displayed and selected linearly.
Any existing hierarchical (nested) folder
structure is handled as a linear sequence.
The ROOT folder 1
is displayed as
\ROOT if it
contains MP3 or WMA files.
Changing folders
1. The CD's top directory level, set up automaticall y by the burn software during writing.

CD mode29
CD mode
Random function (random playback)
You hear the tracks on the current CD in ran-
dom order (e.g. 3, 8, 5, etc.). If you change
the CD, random playback ends.
Switching on random playback
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press button 5.
RANDOM appears briefly and the display
then changes.
With audio CD inserted:
With MP3 / WMA CD inserted:
Random playback of all albums
This function is only available for MP3 / WMA
CDs. The tracks of all albums are played in
random order. Press button 5 twice.
RANDOM appears briefly and the display
then changes. Switching off random playback
Press button 5 again.
Track repeat
You hear the current track repeatedly until
you switch off the function, change the CD,
or change the audio source.
Switching on repeat
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press button ?.
REPEAT appears briefly and the display
then changes.
With audio CD inserted:
With MP3 / WMA CD inserted:
Switching off track repeat Press button ? again.
Setting playback options

CD mode
30
CD mode
This function is only available for MP3 / WMA
CDs.
You hear the current album repeatedly until
you switch off the function, change the CD,
or change the album.
Switching on album repeat
With MP3 / WMA CD inserted: Press button ? twice.
REPEAT appears briefly and the display
then changes.
Switching off album repeat Press button ? again.
With audio CD inserted: Press button =.
With audio CD inserted:
+Press button =. If an MP3 / WMA CD
is inserted, the album and track name are
shown if this information was added when
the CD was created (ID3 tags / metadata). With audio CD inserted:
Press button = twice.
With MP3 / WMA CD inserted: Press button =.
With MP3 / WMA CD inserted: Press button = repeatedly.
The album and track name scroll across
the display from right to left.
If the album and track name are not
present as ID3 tags, the file name is
shown.
To cancel the display: press button
D .
Repeat album
Displaying playback time
Displaying the number of CD tracks
and total playback time
Displaying album and track name
Displaying the album and track name
(ID3 tags / metadata)